Influence of resin molecular weight on bonding interface, water resistance, and mechanical properties of bamboo scrimber composite
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.123458
Abstract: Abstract The bamboo/resin bonding interface significantly influences the preparation and final properties of bamboo scrimber composites (BSCs). Here, BSCs were prepared with different molecular weights of brominated phenol–formaldehyde resin (BrPF, Mw = 542–2001) and Moso bamboo as… read more here.
Keywords: properties bamboo; resin; bonding interface; resin molecular ... See more keywords
Modeling of bonding strength for Fused Filament Fabrication considering bonding interface evolution and molecular diffusion
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2021.06.064
Abstract: Abstract Fused Filament Fabrication (FFF) is one of the most widely used material extrusion additive manufacturing techniques. Its application is limited by the poor mechanical properties because of the weak bonding interface between strands. Although… read more here.
Keywords: bonding strength; bonding interface; molecular diffusion;
Sesquicarbene Complexes: Bonding at the Interface Between M–C Single Bonds and M═C Double Bonds
Sign Up to like & getrecommendations! Published in 2020 at "Organometallics"
DOI: 10.1021/acs.organomet.0c00102
Abstract: Allylic dimetalated complexes [M2C(vinyl)]+ (M = Au(IPr) and Cr(CO)5–) incorporate a new coordination mode of carbon. Digold complexes of this type have recently been detected experimentally. The i... read more here.
Keywords: interface single; bonding interface; single bonds; bonds double ... See more keywords
A novel resin cement to improve bonding interface durability
Sign Up to like & getrecommendations! Published in 2022 at "RSC Advances"
DOI: 10.1039/d2ra04446c
Abstract: Bonding failure is one of the main causes of failure of dental restorations. The bonding strength, aging resistance, and polymerization shrinkage of cement can affect the stability of the bonding interface and lead to marginal… read more here.
Keywords: bonding interface; polymerization shrinkage; cement; novel resin ... See more keywords
Spatial ions distribution of the bonding interface in YAG/Nd:LuAG composite laser ceramic
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the American Ceramic Society"
DOI: 10.1111/jace.15036
Abstract: Composite YAG/Nd:LuAG transparent ceramics were fabricated by a thermal bonding process. The spatial distribution of ions around the original bonding interface of the YAG/Nd:LuAG composite laser ceramic was investigated. Around the original bonding interface, Lu3+… read more here.
Keywords: yag luag; bonding interface; spectroscopy; interface yag ... See more keywords
Effects of Sudden Temperature Drop on Stress at Rapidly Repaired Bonding Interface of Pavement
Sign Up to like & getrecommendations! Published in 2021 at "Mathematical Problems in Engineering"
DOI: 10.1155/2021/6621375
Abstract: The numerical simulations were employed to establish an edge-corner repair model with magnesium phosphate cement (MPC) concrete as the repair material and ordinary Portland cement concrete as the old pavement. After the simulation of repair… read more here.
Keywords: bonding interface; sudden temperature; stress; interface ... See more keywords
Degradation and Failure Phenomena at the Dentin Bonding Interface
Sign Up to like & getrecommendations! Published in 2023 at "Biomedicines"
DOI: 10.3390/biomedicines11051256
Abstract: Damage in the bonding interface is a significant factor that leads to premature failure of dental bonded restorations. The imperfectly bonded dentin-adhesive interface is susceptible to hydrolytic degradation and bacterial and enzyme attack, severely jeopardizing… read more here.
Keywords: bonding interface; dental bonding; dentin bonding; interface ... See more keywords
A Method for Prediction of Ultrasonic Detectability of Interface Gap Defects on TC4 Diffusion-Bonded Joints
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12060911
Abstract: An analysis method for the detectability of defects on the TC4 (Ti-6Al-4V) diffusion bonding interface was proposed in this study. First, a semi-analytical model of the liquid–solid coupling acoustic field with attenuation characteristics was constructed.… read more here.
Keywords: bonding interface; diffusion; detectability; defects tc4 ... See more keywords
Influence of Resin Content and Density on Water Resistance of Bamboo Scrimber Composite from a Bonding Interface Structure Perspective
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14091856
Abstract: As a new type of green environmental protection material for outdoor use, the water resistance of bamboo scrimber composite (BSC) is crucial—the primary reason for a decrease in water resistance being bonding interface failure. From… read more here.
Keywords: bonding interface; water resistance; resin; water ... See more keywords
Stability of diamond/Si bonding interface during device fabrication process
Sign Up to like & getrecommendations! Published in 2018 at "Applied Physics Express"
DOI: 10.7567/1882-0786/aaeedd
Abstract: Diamond/Si bonding interface with an entire contact area and high thermal stability is achieved by surface activated bonding method. The fabrication of diamond field-effect transistors (FETs) on the diamond bonded to Si is demonstrated. The… read more here.
Keywords: interface; bonding interface; fabrication; diamond ... See more keywords