Cost-effective and rapid prototyping of PMMA microfluidic device via polymer-assisted bonding
Sign Up to like & getrecommendations! Published in 2021 at "Microfluidics and Nanofluidics"
DOI: 10.1007/s10404-021-02466-3
Abstract: Microfluidic systems are relatively new technology field with a constant need of novel and practical manufacturing materials and methods. One of the main shortcomings of current methods is the inability to provide rapid bonding, with… read more here.
Keywords: polymer assisted; bonding strength; assisted bonding; polymer ... See more keywords
The reliability of ultrasonic bonded Cu to Cu electrode for 3D TSV stacking
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-7558-2
Abstract: We investigated the mechanical property of Cu–Cu joints bonded using an ultrasonic bonding and evaluated the reliability of 3D structure stacked by through silicon via (TSV) on glass substrate. TSV was fabricated by using the… read more here.
Keywords: reliability ultrasonic; ultrasonic bonded; bonding strength; tsv ... See more keywords
Effect of zinc particle mixing on properties of copper–nanoparticle/bismuth–tin solder hybrid joints
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-0175-x
Abstract: The effects of Zn particle mixing into a Cu–nanoparticle/Bi–Sn solder hybrid bonding were examined. The bonding strength of an SiC/direct-bonded-copper joint exhibited limited dependence on the Zn mixing ratio, whereas that of an SiC/Cu joint… read more here.
Keywords: strength; bonding strength; nanoparticle; mixing ratio ... See more keywords
Fabrication and Characterization of High-Bonding-Strength Al/Ti/Al-Laminated Composites via Cryorolling
Sign Up to like & getrecommendations! Published in 2020 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-020-01041-z
Abstract: Abstract Sandwich-like Al/Ti/Al-laminated composites have many advantages such as low density and high specific strength with value in mechanical manufacturing and aerospace engineering. Here, Al/Ti/Al-laminated composites were fabricated by hot roll bonding and subsequent processes:… read more here.
Keywords: strength; laminated composites; fabrication characterization; bonding strength ... See more keywords
Influence of surface microstructure on bonding strength of modified polypropylene/aluminum alloy direct adhesion
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.05.270
Abstract: Abstract Microstructures and bonding strength between the treated aluminum alloy and modified polypropylene (PP) were systemically investigated in this study. The results show that an increase in the surface energy of PP by grafting maleic… read more here.
Keywords: surface; bonding strength; modified polypropylene; strength ... See more keywords
Enhancement of bonding strength in BiTe-based thermoelectric modules by electroless nickel, electroless palladium, and immersion gold surface modification
Sign Up to like & getrecommendations! Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2021.149005
Abstract: Abstract In this study, an electroless nickel (EN), electroless palladium (EP), and immersion gold (IG) (ENEPIG) multilayer coat was developed for application on BiTe-based thermoelectric materials to increase the bonding strength between BiTe-based materials and… read more here.
Keywords: bonding strength; electroless nickel; bite based; surface ... See more keywords
SiCnw/PyC core-shell networks to improve the bonding strength and oxyacetylene ablation resistance of ZrB2–ZrC coating for C/C–ZrB2–ZrC–SiC composites
Sign Up to like & getrecommendations! Published in 2017 at "Carbon"
DOI: 10.1016/j.carbon.2017.09.019
Abstract: Abstract To enhance the bonding strength and oxyacetylene ablation resistance of the ZrB 2 –ZrC coated C/C–ZrB 2 –ZrC–SiC composites obtained by the combination of supersonic atmosphere plasma spray (SAPS) and precursor infiltration and pyrolysis… read more here.
Keywords: oxyacetylene ablation; bonding strength; ablation; sicnw pyc ... See more keywords
Plasma-sprayed nanostructured scandia-yttria and ceria-yttria codoped zirconia coatings: Microstructure, bonding strength and thermal insulation properties
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.03.204
Abstract: Abstract Microstructure, thermal insulation behavior and bonding strength of nanostructured 5%scandia, 0.5%yttria codoped zirconia (5.5 ScYSZ) and 25%ceria, 2.5%yttria co stabilized zirconia (27.5%CYSZ) coatings were investigated. ScYSZ and CYSZ nanostructured granules (as a top coat)… read more here.
Keywords: yttria; thermal insulation; zirconia; bonding strength ... See more keywords
Carbon nanotubes for enhanced interface of fiber metal laminate
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2018.08.008
Abstract: Abstract The improvement in the bonding strength of fiber metal laminate is proposed by the inclusion of multi walled carbon nanotubes (MWCNTs). The bonding strength of fiber metal laminate (FML) was studied using lap joint… read more here.
Keywords: fiber; fiber metal; bonding strength; metal laminate ... See more keywords
Effect of microwave heating time on bonding strength and corrosion resistance of Ca-P composite layers for carbon/carbon composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.04.189
Abstract: Abstract Three coated Ca-P composite layers were fabricated by microwave-assisted hydrothermal (MH) and supersonic atmospheric plasma spray (SAPS) method. This multilayer coating aims to promote the bonding strength as well as the corrosion property against… read more here.
Keywords: corrosion resistance; bonding strength; composite layers; spectroscopy ... See more keywords
A heat-resistant preceramic polymer with broad working temperature range for silicon carbide joining
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2017.08.033
Abstract: Abstract A room temperature curable heat-resistant adhesive with broad working temperature range was prepared through organic and inorganic modification. The preceramic polymethylsiloxane showed low bonding strength for silicon carbide from 400 °C to 600 °C because of… read more here.
Keywords: bonding strength; temperature; polymer; heat resistant ... See more keywords