Articles with "bottom hole" as a keyword



Photo by dilucidus from unsplash

Real-time prognosis of flowing bottom-hole pressure in a vertical well for a multiphase flow using computational intelligence techniques

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Petroleum Exploration and Production Technology"

DOI: 10.1007/s13202-019-0728-4

Abstract: An accurate prediction of well flowing bottom-hole pressure (FBHP) is highly needed in petroleum engineering applications such as for the field production optimization, cost per barrel of oil reduction, and quantification of workover remedial operations.… read more here.

Keywords: computational intelligence; vertical well; hole pressure; flowing bottom ... See more keywords
Photo from wikipedia

Crack growth threshold testing using flat-bottom hole specimens

Sign Up to like & get
recommendations!
Published in 2021 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2021.107751

Abstract: Abstract This study benchmarks a relatively new axisymmetric specimen concept for use in threshold testing, where the crack initiates and grows from the corner of a flat-bottomed circular hole in a cylindrical specimen while the… read more here.

Keywords: bottom hole; crack growth; flat bottom; crack ... See more keywords
Photo by kellysikkema from unsplash

Poroelastic modeling of cutting bottom-hole rock – Part I: Stress state of bottom-hole rock

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Petroleum Science and Engineering"

DOI: 10.1016/j.petrol.2020.107014

Abstract: Abstract This is the first part of a series of two papers modeling cutting bottom-hole rock during drilling. This paper studies the stress state of a bottom-hole rock that a downhole bit is drilling. A… read more here.

Keywords: stress state; state bottom; bottom hole; hole rock ... See more keywords
Photo from wikipedia

Dynamic performance prediction of coalbed methane wells under the control of bottom-hole pressure and casing pressure

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Petroleum Science and Engineering"

DOI: 10.1016/j.petrol.2020.107799

Abstract: Abstract In the early production stage of coalbed methane (CBM) wells, especially in low permeability reservoirs, the method of shutting in casing annulus is usually adopted. However, the current commercial numerical simulation software fails to… read more here.

Keywords: hole pressure; production; casing pressure; gas ... See more keywords