Wettability of SnAgCu–Cr alloys on graphite with different Cr contents
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1979-4
Abstract: The wettability of brazing alloy on graphite surface is a key factor affecting the successful brazing of graphite to metals. By introducing active Cr, the traditional Sn0.3Ag0.7Cu brazing alloy can wet the graphite effectively. The… read more here.
Keywords: contact angle; brazing alloy; wettability; wettability snagcu ... See more keywords
Nd:YAG pulsed laser brazing of cBN to steel matrix with Zr modified Ag–Cu–Ti active brazing alloy
Sign Up to like & getrecommendations! Published in 2020 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2020.107732
Abstract: Abstract The study was to investigate the modifying effect of the active element Zr on the properties of mechanical alloyed (MA) AgCu28–4.5Ti brazing alloys, especially the joint performance of cubic boron nitride (cBN)/45 steel brazed… read more here.
Keywords: yag pulsed; active brazing; cbn steel; brazing alloy ... See more keywords
Interfacial microstructure and mechanical properties of brazing carbon/carbon composites to stainless steel using diamond particles reinforced Ag-Cu-Ti brazing alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.05.151
Abstract: Abstract In this manuscript, diamond particles were used as reinforcement in the Ag-26.7Cu-4.5Ti (wt.%) brazing alloy for joining carbon/carbon composites (C/C) to stainless steel (316). The effects of the volume percentage of diamond particles on… read more here.
Keywords: brazing alloy; diamond particles; carbon carbon; diamond ... See more keywords
Microstructure and properties analysis of the brazing alloy prepared from recycled E-waste
Sign Up to like & getrecommendations! Published in 2022 at "Frontiers in Chemistry"
DOI: 10.3389/fchem.2022.1038555
Abstract: In order to realize the efficient and comprehensive utilization of e-waste resources and short process preparation of alloy brazing materials, this study has analyzed the microstructure and properties of e-waste recycled brazing alloys by the… read more here.
Keywords: circuit board; waste; brazing alloy; alloy obtained ... See more keywords
Corrosion Inhibition of Brazing Cu-Ag Alloy with 1,2,3-Benzotriazole and 2,5-Dimercapto-1,3,4-Thiadiazole
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion"
DOI: 10.5006/3642
Abstract: Adsorption and inhibition behavior of 1,2,3-benzotriazole (BTA) and 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on brazing Cu-Ag alloy was studied in deionized water using potentiodynamic polarization ... read more here.
Keywords: inhibition; brazing alloy; corrosion; benzotriazole ... See more keywords