Microstructures and mechanical properties of brazed Al2O3/Cu joints with bismuth glass
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.05.123
Abstract: Abstract Alumina ceramics and copper were vacuum brazed using a bismuth-borate-zinc glass at temperatures between 660 and 720 °C for 20 min. The interfacial phases were characterized and the influence of brazing temperatures on microstructure of the… read more here.
Keywords: microstructures mechanical; mechanical properties; properties brazed; brazing temperature ... See more keywords
Microstructure and mechanical properties of BN-Si3N4 and AlON joints brazed with Ag-Cu-Ti filler alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2017.10.001
Abstract: Abstract AlON was successfully brazed to BN-Si3N4 using a Ag-Cu-Ti filler alloy. SEM, TEM and XRD studies revealed that a TiN + TiB2 + Ti5Si3 reaction layer formed adjacent to the BN-Si3N4 while a (Cu,Al)3Ti3O layer formed adjacent to… read more here.
Keywords: brazing temperature; filler alloy; mechanical properties; microstructure mechanical ... See more keywords
Contact reactive brazing of Al7075 alloy using Cu layer deposited by magnetron sputtering
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.10.002
Abstract: Abstract Plasma bombardment was applied to remove the surface oxide film of 7075 alloy and the deposited Cu layer with thickness of ∼20 μm was attached closely to the surface of 7075 alloy by magnetron sputtering… read more here.
Keywords: brazing temperature; magnetron sputtering; alloy; brazing ... See more keywords
Vacuum brazing of Ti6Al4V alloy to 316L stainless steel using a Ti-Cu-based amorphous filler metal
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2019.01.020
Abstract: Abstract The effect of brazing parameters on the interfacial microstructure and mechanical properties of Ti6Al4V titanium alloy/316 L stainless steel brazed joint was investigated. The joint presented sectionalized interfacial microstructure by forming four reaction zones. The… read more here.
Keywords: steel; vacuum brazing; stainless steel; brazing temperature ... See more keywords
Effect of Brazing Temperature on Microstructure, Tensile Strength, and Oxide Film-Breaking Synergy of 5A06 Aluminum Alloy Welded by TG-TLP
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13061048
Abstract: 5A06 aluminum alloy bar was brazed by temperature gradient transient liquid phase diffusion welding (TG-TLP). The effects of brazing temperature on the microstructure and the tensile strength of the brazing joints were investigated. Three typical… read more here.
Keywords: 5a06 aluminum; brazing temperature; aluminum alloy; tensile strength ... See more keywords