Polishing effects and wear performance of chairside CAD/CAM materials
Sign Up to like & getrecommendations! Published in 2018 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-018-2473-3
Abstract: ObjectivesTo investigate the surface roughness of CAD/CAM materials immediately after milling and after different chairside and labside polishing procedures. A two-body wear test was performed to compare the different wear characteristics of the materials and… read more here.
Keywords: cad cam; chairside; labside polishing; cam materials ... See more keywords
Cement Thickness of Inlay Restorations Made of Lithium Disilicate, Polymer‐Infiltrated Ceramic and Nano‐Ceramic CAD/CAM Materials Evaluated Using 3D X‐Ray Micro‐Computed Tomography
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Prosthodontics"
DOI: 10.1111/jopr.12521
Abstract: PURPOSE To evaluate the marginal and internal cement thicknesses of inlay restorations made of various CAD/CAM materials using 3D X-ray micro-computed tomography (micro-CT) technique. MATERIALS AND METHODS Caries-free extracted mandibular molars (N = 30) with… read more here.
Keywords: cement thickness; cement; micro; cad cam ... See more keywords
Three‐Dimensional Digital Evaluation of the Fit of Endocrowns Fabricated from Different CAD/CAM Materials
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Prosthodontics"
DOI: 10.1111/jopr.12770
Abstract: PURPOSE A wide variety of CAD/CAM materials are available for single-tooth restorations. CAD/CAM material characteristics are different and may influence CAM fabrication accuracy. There is no study investigating the influence of different CAD/CAM materials on… read more here.
Keywords: fit; different cad; cad; cad cam ... See more keywords
Microstructural and Mechanical Characterization of CAD/CAM Materials for Monolithic Dental Restorations
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Prosthodontics"
DOI: 10.1111/jopr.12964
Abstract: PURPOSE To determine and compare the microstructure, flexural strength, flexural modulus, fracture strength, and microhardness of four types of computer-aided design/computer-aided manufacturing (CAD/CAM) materials for monolithic dental restorations. MATERIALS AND METHODS A lithium disilicate (LD;… read more here.
Keywords: strength; fracture; fracture strength; cad cam ... See more keywords
New generation CAD-CAM materials for implant-supported definitive frameworks fabricated by using subtractive technologies
Sign Up to like & getrecommendations! Published in 2022 at "BioMed Research International"
DOI: 10.1155/2022/3074182
Abstract: Innovations in digital manufacturing enabled the fabrication of implant-supported fixed dental prostheses (ISFDPs) in a wide variety of recently introduced materials. Computer-aided design and computer-aided manufacturing (CAD-CAM) milling allows the fabrication of ISFDPs with high… read more here.
Keywords: new generation; cad; cad cam; cam materials ... See more keywords
Influence of surface treatment and ageing on the bond strength of resin cement to hybrid and glass-ceramic CAD/CAM materials
Sign Up to like & getrecommendations! Published in 2022 at "Primary Dental Journal"
DOI: 10.1177/20501684221133274
Abstract: The influence of different surface treatments and ageing on the shear bond strength (SBS) of computer-aided design/computer-aided manufacturing (CAD/CAM) materials is still contentious. Therefore, this study evaluated the effect of surface treatments and ageing on… read more here.
Keywords: surface treatment; surface; resin cement; cad cam ... See more keywords
Elution of Monomers From CAD-CAM Materials and Conventional Resin Composite in Distilled Water and Artificial Saliva.
Sign Up to like & getrecommendations! Published in 2022 at "Operative dentistry"
DOI: 10.2341/21-079-l
Abstract: PURPOSE The purpose of this study was to evaluate the leaching pattern of different types of polymer computer-aided design and computer-aided manufacturing (CAD-CAM) materials with a conventional resin composite. METHODS AND MATERIALS Specimens of three… read more here.
Keywords: conventional resin; resin composite; materials conventional; cad cam ... See more keywords
Monomers Release from Direct and Indirect Resin-Based Restorations after Immersion in Common Beverages
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14235158
Abstract: Impurities or degradation of the components of resin-based materials have been throughout investigated by the dental scientific community. The aim of this study is to examine if there is a release of monomers from resin-based… read more here.
Keywords: resin based; cad cam; cam materials; common beverages ... See more keywords
Effect of various surface treatments on the bond strength of resin luting agent and the surface roughness and surface energy of CAD/CAM materials.
Sign Up to like & getrecommendations! Published in 2020 at "Dental materials journal"
DOI: 10.4012/dmj.2019-359
Abstract: The aim of this study was to examine the effect of various surface treatments on the bond strength of a resin luting agent and the surface roughness and surface energy of computer-aided design and computer-aided… read more here.
Keywords: surface roughness; surface; cad cam; cam materials ... See more keywords