Hierarchical Carbon Composites for High-Energy/Power-Density and High-Reliability Supercapacitors with Low Aging Rate.
Sign Up to like & getrecommendations! Published in 2022 at "ChemSusChem"
DOI: 10.1002/cssc.202200345
Abstract: A facile method for preparing hierarchical carbon composites that contain activated carbon (AC), carbon nanospheres (CNSs), and carbon nanotubes (CNTs) for use as the electrode material in supercapacitors (SCs) is developed. The CNS/CNT network enables… read more here.
Keywords: carbon; carbon composites; spectroscopy; reliability ... See more keywords
Theoretical Analysis on Needle-Punched Carbon/Carbon Composites
Sign Up to like & getrecommendations! Published in 2019 at "Applied Composite Materials"
DOI: 10.1007/s10443-018-9749-2
Abstract: Needle-punched carbon/carbon composites (NP-C/Cs) are advanced materials widely used in aerospace applications. The needle-punching technique improves the integrality of carbon-fibre plies, however, it also introduces many defects, affecting the mechanical behavior of NP-C/Cs. A theoretical… read more here.
Keywords: punched carbon; carbon; needle punched; carbon composites ... See more keywords
Activated carbon–carbon composites made of pitch-based carbon fibers and phenolic resin for use of adsorbents
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1389-7
Abstract: Abstract Activated carbon–carbon composites (ACCC) were prepared from low-cost, nonwoven like, continuous mesophase pitch-based carbon fibers and phenolic resin. The carbon fiber/phenolic resin composite was first fabricated by using a vacuum bagging resin infusion technique.… read more here.
Keywords: carbon; carbon composites; carbon carbon; phenolic resin ... See more keywords
Microstructure and Current Carrying Wear Behaviors of Copper/Sintered–Carbon Composites for Pantograph Sliders
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-020-00652-6
Abstract: Abstract Neoteric copper/sintered–carbon (Cu/SC) composites for pantograph sliders were produced with the method of pressure infiltration. The friction and wear behaviors with or without current and mechanical performances of Cu/SC composites showed that graphite acted… read more here.
Keywords: copper sintered; composites pantograph; pantograph sliders; carbon ... See more keywords
Preparation of alumina-carbon composites with phloroglucinol-formaldehyde resin and their application in asymmetric hydrogenation
Sign Up to like & getrecommendations! Published in 2020 at "Chinese Chemical Letters"
DOI: 10.1016/j.cclet.2019.09.029
Abstract: Abstract To overcome the shortcomings of single component carrier supported platinum (Pt)-based catalysts, herein, we demonstrate the fabrication of alumina combined mesoporous carbon to prepare a series of alumina-carbon composites and their corresponding Pt-based catalysts.… read more here.
Keywords: carbon; asymmetric hydrogenation; carbon composites; phloroglucinol formaldehyde ... See more keywords
Selective removal of phosphate using La-porous carbon composites from aqueous solutions: Batch and column studies
Sign Up to like & getrecommendations! Published in 2017 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2017.02.075
Abstract: Abstract Porous carbon composites containing varying La contents were synthesized and studied for the sorption of phosphate. The phosphate sorption capacities increased with increasing La content and showed an almost complete La consumption efficiency (P/La… read more here.
Keywords: phosphate sorption; porous carbon; carbon composites; sorption ... See more keywords
Design of multishell microsphere of transition metal oxides/carbon composites for lithium ion battery
Sign Up to like & getrecommendations! Published in 2020 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2019.122489
Abstract: Abstract Although the synthesis of transition metal oxide hollow structure is well established, it is still very difficult to control the size distribution, morphological uniformity, cavity volume, shell clarity and functional groups of products. Herein,… read more here.
Keywords: transition metal; metal; carbon composites; carbon ... See more keywords
Persulfate activation by ZIF-67-derived cobalt/nitrogen-doped carbon composites: Kinetics and mechanisms dependent on persulfate precursor
Sign Up to like & getrecommendations! Published in 2021 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2020.127305
Abstract: Abstract Whereas previous studies that explored the application of metal–carbon composites as persulfate activators have focused on synergistic performance improvements, the potential advantages or features that can be acquired by integrating metal and carbon constituents… read more here.
Keywords: doped carbon; carbon; metal carbon; persulfate ... See more keywords
Wavelike interfacial design and mechanical behaviour of joint between Si-SiC coated carbon/carbon composites and Li2O-Al2O3-SiO2 glass ceramics
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.12.176
Abstract: Abstract A new insight of the oxidation phenomenon utilisation of Si-based ceramics was proposed to strengthen the joining of carbon/carbon (C/C) composites and Li 2 O-Al 2 O 3 -SiO 2 (LAS) glass ceramics. A… read more here.
Keywords: carbon; glass ceramics; carbon composites; carbon carbon ... See more keywords
Thermophysical properties of three-dimensional ceramic-filler-modified carbon/carbon composites
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.10.015
Abstract: Abstract SiC and B 4 C fillers were introduced into three-dimensional, needled, integrated fibre felts by one-shot infiltration to produce ceramic-modified carbon/carbon (C/C) composites, B 4 C-C/C and SiC-C/C, and the effects of ceramic fillers… read more here.
Keywords: carbon composites; modified carbon; carbon carbon; thermophysical properties ... See more keywords
Flexibly tailored microstructure and tribological properties of carbon/carbon composites via combination of h-BN powdered addition and heat-treatment
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.07.032
Abstract: Abstract In this work, hexagonal boron nitride powders (h-BN) and heat-treatment (HT) were used to tailor microstructures and tribological properties for Carbon/Carbon composites. The microstructures and tribological behaviors of virgin Carbon/Carbon, h-BN modified Carbon/Carbon, Carbon/Carbon… read more here.
Keywords: heat treatment; carbon composites; carbon carbon; powdered addition ... See more keywords