Laser Direct-Write Sensors on Carbon-Fiber-Reinforced Poly-Ether-Ether-Ketone for Smart Orthopedic Implants.
Sign Up to like & getrecommendations! Published in 2022 at "Advanced science"
DOI: 10.1002/advs.202105499
Abstract: Mechanically close-to-bone carbon-fiber-reinforced poly-ether-ether-ketone (CFR-PEEK)-based orthopedic implants are rising to compete with metal implants, due to their X-ray transparency, superior biocompatibility, and body-environment stability. While real-time strain assessment of implants is crucial for the postsurgery… read more here.
Keywords: orthopedic implants; fiber reinforced; carbon fiber; reinforced poly ... See more keywords
Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibers
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45244
Abstract: In this study, carbon fiber–epoxy composites are interleaved with electrospun polyamide-6,6 (PA 66) nanofibers to improve their Mode-I fracture toughness. These nanofibers are directly deposited onto carbon fabrics before composite manufacturing via vacuum infusion. Three-point… read more here.
Keywords: electrospun nanofibers; carbon fiber; carbon; fiber epoxy ... See more keywords
Molecular and thermal studies of carbon fiber precursor polymers with low thermal‐oxidative stabilization characteristics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.46381
Abstract: In this investigation, terpolymers, copolymers, and homopolymer of acrylonitrile with dimethylaminopropyl acrylamide (DMAPA), itaconic acid (IA) viz., poly(acrylonitrile‐ran‐3‐dimethylaminopropyl acrylamide‐ran‐itaconic acid) [P(AN‐DMAPP‐IA)], poly(acrylonitrile‐co‐3, dimethylaminopropyl acrylamide) [P(AN‐DMAPP)] were synthesized with varying amounts of comonomers using solution polymerization… read more here.
Keywords: stabilization characteristics; carbon fiber; precursor polymers; dmapp ... See more keywords
Recent development and challenges of multifunctional structural supercapacitors for automotive industries
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Energy Research"
DOI: 10.1002/er.3707
Abstract: Summary In the last decades, fuel scarcity and increasing pollution level pave the way for an extensive interest in alternatives to petroleum-based fuels such as biodiesel, solar cells, lithium ion batteries, and supercapacitors. Among them,… read more here.
Keywords: automotive industries; carbon fiber; structural supercapacitors; supercapacitors automotive ... See more keywords
Electrochemical performance evaluation of tin oxide nanorod‐embedded woven carbon fiber composite supercapacitor
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Energy Research"
DOI: 10.1002/er.3827
Abstract: Summary Tin oxide (SnO2) nanorod (NR)-fabricated composite capacitors have been developed by vacuum-assisted resin transfer molding process. The NRs were synthesized on carbon fiber by following hydrothermal synthesis method. Such SnO2 grown woven carbon fiber… read more here.
Keywords: carbon fiber; energy; woven carbon; fiber ... See more keywords
Progress in Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites.
Sign Up to like & getrecommendations! Published in 2022 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202200538
Abstract: Carbon fiber reinforced polymer (CFRP) composites are indispensable in a variety of applications, because of their high specific strength. CFRPs are generally constructed by carbon fibers as reinforcements and crosslinked polymers as binders. Due to… read more here.
Keywords: fiber reinforced; carbon; carbon fiber; progress chemical ... See more keywords
Covalent functionalization of carbon fiber with poly(acrylamide) by reversible addition–fragmentation chain transfer polymerization for improving carbon fiber/epoxy interface
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23556
Abstract: A novel method was developed for grafting poly(acrylamide) (PAAM) on to the carbon fiber (CF) surface via reversible addition–fragmentation chain transfer (RAFT) polymerization to improve the interaction between carbon fibers and epoxy matrix in the… read more here.
Keywords: polymerization; carbon fiber; carbon; paam ... See more keywords
Mechanical properties of carbon nanotube/carbon fiber reinforced thermoplastic polymer composite
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23771
Abstract: Carbon nanotube (CNT)/carbon fiber (CF) hybrid fiber was fabricated by sizing unsized CF tow with a sizing agent containing CNT. The hybrid fiber was used to reinforce a thermoplastic polymer to prepare multiscale composite. The… read more here.
Keywords: carbon fiber; carbon; thermoplastic polymer; carbon nanotube ... See more keywords
Directional diffusion of moisture into unidirectional carbon fiber/epoxy Composites: Experiments and modeling
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24626
Abstract: Water diffusion into composites in different directions was examined in this study with the aim of determining the best way of measuring diffusion coefficients and to provide values to compare with model predictions. Water absorption… read more here.
Keywords: absorption; carbon fiber; diffusion; diffusion moisture ... See more keywords
Plasma treatment of carbon fiber on the tribological property of polyimide composite
Sign Up to like & getrecommendations! Published in 2017 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6208
Abstract: The effect of different ratios of carbon fiber (CF) reinforcing polyimide (PI) and surface treatment of CF on the microstructure and wear resistance of surface layers was studied. The increase of CF content led to… read more here.
Keywords: carbon fiber; treatment; surface; plasma treatment ... See more keywords
The addition of acid treated carbon nanotube on the interfacial adhesion of carbon fiber reinforced UHMWPE composite
Sign Up to like & getrecommendations! Published in 2017 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6213
Abstract: Carbon fiber reinforced Ultra High Molecular Weight Polyethylene (CF/UHMWPE) composites have been filled with acid treated carbon nanotube to enhance the adhesion. According to the modification, the interlaminar shear strength (ILSS) of composites has been… read more here.
Keywords: carbon fiber; carbon; fiber reinforced; carbon nanotube ... See more keywords