Enhancement of Wear properties of a polyether ether ketone polymer by incorporation of carbon and glass fibers
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.47587
Abstract: Some properties of polymers can be improved through the incorporation of carbon and glass fibres into the polymer matrix. In this research the wear resistance of two polymer composites CF-PEEK and GF-PEEK were compared with… read more here.
Keywords: incorporation carbon; carbon; specific wear; carbon glass ... See more keywords
Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
Sign Up to like & getrecommendations! Published in 2019 at "Additive Manufacturing"
DOI: 10.1016/j.addma.2019.01.005
Abstract: Abstract The additive manufacturing of structural composites is a disruptive technology currently limited by its moderate mechanical properties. Continuous fibre reinforcements have recently been developed to create high performance composites and open up encouraging prospects.… read more here.
Keywords: direction; reinforced polyamide; continuous carbon; carbon ... See more keywords
FEA simulation and experimental validation of mode I and II delamination at the carbon/glass/epoxy hybrid interface: Physical-based interpretation
Sign Up to like & getrecommendations! Published in 2020 at "Composites Communications"
DOI: 10.1016/j.coco.2020.100532
Abstract: Abstract The aim of this study was to carry out simulations and perform experimental quasi-static delamination tests in modes I and II to characterize the mechanical behavior at a hybrid interface. For that purpose, contact… read more here.
Keywords: delamination; glass epoxy; energy; hybrid interface ... See more keywords
Study on the stab resistance mechanism and performance of the carbon, glass and aramid fiber reinforced polymer and hybrid composites
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2019.111690
Abstract: Abstract In this study, stiff stab-resistant materials for riot shields were developed by using fiber reinforced polymer composites (FRPs) made of three different types of fibers: carbon, glass and p-aramid. The stab resistance of the… read more here.
Keywords: fiber reinforced; reinforced polymer; stab resistance; glass aramid ... See more keywords
Microanalysis of Carbon and Glass Fiber obtained by Resin Transfer Molding Process to Manufacture Blades for Wind Turbines
Sign Up to like & getrecommendations! Published in 2018 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927618005895
Abstract: 1 Dirección de Posgrado, Instituto Tecnológico de Pachuca, Carretera México-Pachuca Km. 87.5, Colonia Venta Prieta, C.P. 42080 Pachuca de Soto, Hgo., México. 2 Departamento de Ingeniería Mecánica Automotriz, Universidad Politécnica de Pachuca, Carretera Pachuca-Ciudad Sahagún… read more here.
Keywords: pachuca; microanalysis; fiber obtained; glass fiber ... See more keywords
Polyurethane/clay nanocomposites reinforced with carbon and glass fibres: study of mechanical and thermal properties, and the effect of electron beam irradiation
Sign Up to like & getrecommendations! Published in 2017 at "Plastics, Rubber and Composites"
DOI: 10.1080/14658011.2017.1384629
Abstract: ABSTRACT Polyurethane (PU) nanocomposites with 0, 1, 3, 5, and 7 wt-% nanoclay contents were prepared. X-ray diffraction patterns, transmission electron microscopy images, tensile test, and thermogravimetric analysis were utilised to reveal the morphological, mechanical, and… read more here.
Keywords: glass fibres; mechanical thermal; thermal; carbon glass ... See more keywords
The Influence of Content of Reinforcing Filler on Mechanical Properties of Carbon-Glass Fiber Reinforced Plastics in Matrix T-107
Sign Up to like & getrecommendations! Published in 2018 at "Inorganic Materials: Applied Research"
DOI: 10.1134/s2075113318010215
Abstract: This work presents the results of research on mechanical properties of hybrid polymeric composite materials (PCM) with different percentage of carbon filler FormosaTC-35 (12K) and glass filler T-10-14 in epoxy matrix Т-107. It was established… read more here.
Keywords: glass; content reinforcing; mechanical properties; matrix 107 ... See more keywords
A comparative study on the interlaminar shear strength of carbon, glass, and Kevlar fabric/epoxy laminates filled with SiC particles
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Composite Materials"
DOI: 10.1177/0021998317701559
Abstract: The present article investigates the interlaminar shear strength of the woven carbon, glass, and Kevlar fiber reinforced epoxy (CFRE, GFRE, and KFRE) composites filled with SiC particles. The work covers the samples preparation, testing, and… read more here.
Keywords: glass kevlar; shear strength; interlaminar shear; sic particles ... See more keywords
Effect of different stacking sequences on hybrid carbon/glass/epoxy composites laminate: Thermal, dynamic mechanical and long-term behavior
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Composite Materials"
DOI: 10.1177/0021998319868512
Abstract: In the present study, different stacking sequences on hybrid carbon/glass/epoxy composites laminate were examined in relation to thermal, dynamic mechanical and long-term behavior. A positive hybrid effect was found for both hybrid composites (interleaved-Hybrid 1… read more here.
Keywords: dynamic mechanical; glass; carbon glass; long term ... See more keywords
Piezoresistive damage sensing and mechanical characteristics of carbon/glass hybrid thermoplastic composites
Sign Up to like & getrecommendations! Published in 2023 at "Journal of Composite Materials"
DOI: 10.1177/00219983231166068
Abstract: A comprehensive experimental investigation is performed to understand the damage sensing capabilities of thermoplastic intra-ply carbon/glass laminated composites embedded with Carbon Nanotubes (CNTs) under quasi-static interlaminar shear and mode-I fracture loading conditions. CNTs are dispersed… read more here.
Keywords: damage sensing; carbon; carbon glass; orientation ... See more keywords
Electromagnetic Interference Shielding Effectiveness of Direct-Grown-Carbon Nanotubes/Carbon and Glass Fiber-Reinforced Epoxy Matrix Composites
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16072604
Abstract: In this study, carbon nanotubes (CNTs) were grown under the same conditions as those of carbon fibers and glass fibers, and a comparative analysis was performed to confirm the potential of glass fibers with grown… read more here.
Keywords: fiber reinforced; glass fiber; carbon; carbon glass ... See more keywords