Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Small"
DOI: 10.1002/smll.201603718
Abstract: The smooth electric transmission is crucial for the high-efficient electrocatalysis. Herein, a series of peapod-like metallic Mx Py /C (M = Co, Ni, and Cu) composites is developed as bifunctional catalysts toward hydrogen and oxygen…
read more here.
Keywords:
hydrogen oxygen;
peapod like;
carbon layer;
carbon ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Ionics"
DOI: 10.1007/s11581-018-2608-1
Abstract: AbstractA high-performance Ni/Mo co-doped lithium manganate composite material, LiNi0.03Mo0.01Mn1.96O4, is prepared by a solid-state method, then a biomass-derived carbon layer with ethyl cellulose as the carbon source is applied to the surface of the composite…
read more here.
Keywords:
03mo0 01mn1;
carbon;
carbon layer;
01mn1 96o4 ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Applied Catalysis A: General"
DOI: 10.1016/j.apcata.2019.117183
Abstract: Abstract The N-doped carbon layer coated SBA-15 support has been accomplished via a pyrolysis process. The ultra-low loading Ru nanoparticles (ca. 0.1 wt.%) was incorporated into the support by impregnation and the sequential reduction. The images…
read more here.
Keywords:
layer coated;
carbon layer;
doped carbon;
hydrogenation ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Chinese Chemical Letters"
DOI: 10.1016/j.cclet.2019.04.070
Abstract: Abstract Surface chemical properties of supports have an important influence on active sites and their catalytic behavior. Here, we fabricated a series of cobalt-based catalysts supported by carbon layer-coated ordered mesoporous silica (OMS) composites for…
read more here.
Keywords:
based catalysts;
carbon layer;
layer coated;
coated ordered ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2019.122855
Abstract: Abstract Water safety is closely related to the human health, an efficient and low-cost water disinfection method is far-reaching for all kinds of water supplies. However, how to achieve convenient and efficient water disinfection is…
read more here.
Keywords:
cu2o;
water;
water disinfection;
carbon layer ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2021.109354
Abstract: Abstract The lithium-oxygen batteries (LOBs) have gained extensive interest in the past decade, but are plagued by slow reaction kinetics and induced large-voltage hysteresis. Therefore, developing extremely capable catalysts to enhance catalytic behavior and mitigate…
read more here.
Keywords:
carbon;
dendritic shaped;
shaped carbon;
carbon layer ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2017.07.106
Abstract: Abstract Design and constructing hierarchical architecture nanostructure is very effective to achieve good electrochemical performance for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Herein, uniform hierarchical Fe 7 S 8 nanostructures coated by thin carbon…
read more here.
Keywords:
storage;
carbon;
sodium;
lithium ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2018.04.068
Abstract: Photocatalytic water splitting is considered to be a promising strategy for addressing the global energy crisis through the expanded use of solar energy. Herein, cadmium sulfide (CdS) nanorods modified with a thin conductive carbon layer…
read more here.
Keywords:
cadmium sulfide;
carbon layer;
carbon;
nickel phosphide ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2017.11.043
Abstract: Abstract The Ti22Si78 (wt.%) braze was used to bond porous BN/Si3N4 ceramic. The results revealed that the joint strength was low. In order to improve the joint strength, a carbon coated modification of the porous…
read more here.
Keywords:
carbon;
layer;
joint strength;
effect carbon ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Materials Research Bulletin"
DOI: 10.1016/j.materresbull.2018.09.004
Abstract: Abstract In this work, we develop a one-step carbonization method for constructing a core-shell structure of porous silicon with nitrogen-doped carbon layer for lithium-ion batteries. As a result, the porous silicon is evenly coated with…
read more here.
Keywords:
nitrogen doped;
doped carbon;
carbon;
porous silicon ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Synthetic Metals"
DOI: 10.1016/j.synthmet.2021.116717
Abstract: Abstract Silicon-based materials (e.g., nanosilicon and porous silicon) are being actively researched for use as anodes in high-energy Li-ion batteries (LIBs), which have high specific capacities and long charging/discharging cycling lifespans. However, the enormous specific…
read more here.
Keywords:
carbon layer;
silicon;
ion batteries;
micron ... See more keywords