Vascular Cast to Program Antistenotic Hemodynamics and Remodeling of Vein Graft
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Science"
DOI: 10.1002/advs.202204993
Abstract: The structural stability of medical devices is established by managing stress distribution in response to organ movement. Veins abruptly dilate upon arterial grafting due to the mismatched tissue property, resulting in flow disturbances and consequently… read more here.
Keywords: cast; vascular cast; cast program; program antistenotic ... See more keywords
Effect of Austenite Reversion Treatment and Partitioning on the Phase Transformation Behavior and Mechanical Properties of Martensitic–Austenitic CrMnNi‐Cast Steel
Sign Up to like & getrecommendations! Published in 2024 at "steel research international"
DOI: 10.1002/srin.202400466
Abstract: The grain size of austenitic‐stainless‐cast steels is usually coarse and may be several hundred microns to millimeters, depending on solidification conditions and ingot geometry. During solidification, dendritic crystals grow into the supercooled melt and stop… read more here.
Keywords: phase transformation; steel; cast; austenite reversion ... See more keywords
Mechanisms of temper embrittlement and recovery in cast HY-80 high-strength low-alloy steel
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2973-1
Abstract: To better understand the mechanisms and rate of temper embrittlement in cast HY-80 high-strength low-alloy steel, samples were subjected to embrittlement and recovery treatments after a typical industrial heat treatment. The embrittlement rate was studied… read more here.
Keywords: recovery; alloy; embrittlement recovery; rate ... See more keywords
Dependence on the Chromium Content of the High-Temperature Oxidation Behavior of Ta-Rich Nickel-Based Cast Alloys
Sign Up to like & getrecommendations! Published in 2017 at "Oxidation of Metals"
DOI: 10.1007/s11085-017-9828-z
Abstract: The high-temperature stability of primary tantalum carbides is a problem of importance for chromium-rich cast alloys, based on cobalt or nickel. The focus of this study was nickel-based alloys, as these alloys are particularly sensitive… read more here.
Keywords: oxidation; high temperature; content; cast ... See more keywords
Phase Constituent and Microhardness of As-Cast and Long-Time Annealed AlxCo2−xCrFeNi Multicomponent Alloys
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Phase Equilibria and Diffusion"
DOI: 10.1007/s11669-019-00761-9
Abstract: The phase constituent and microstructure of arc-melted AlxCo2−xCrFeNi multicomponent alloys, in both the as-cast state and after annealed at 800 or 1000 °C for 30 days, were experimentally investigated by scanning electron microscopy and x-ray diffraction. Different… read more here.
Keywords: phase; multicomponent alloys; xcrfeni multicomponent; phase constituent ... See more keywords
Thermomechanical Treatment of High-Shear Melt-Conditioned Twin-Roll Cast Strip of Recycled AA5754 Alloy
Sign Up to like & getrecommendations! Published in 2018 at "JOM"
DOI: 10.1007/s11837-018-3190-8
Abstract: A continuous high-shear melt conditioning twin-roll casting process has been developed for production of recycled aluminum alloy strip with minimum casting defects. High-shear melt conditioning is applied to increase the impurities tolerance of recycled aluminum.… read more here.
Keywords: roll; strip; shear melt; twin roll ... See more keywords
Dry Wear Behavior of Cladded NiCoCrAlY Coating on Cast Iron at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03858-1
Abstract: To improve the service life of valve retainer in the engine exhaust system, the NiCoCrAlY alloy coating was fabricated on compacted graphite cast iron by laser cladding. Microstructure and high-temperature wear resistance of the coating… read more here.
Keywords: wear behavior; behavior cladded; cast iron; dry wear ... See more keywords
Revisiting the Diffusion of Niobium in an As-Cast Nickel-Based Superalloy During Annealing at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00342-y
Abstract: Abstract While understanding the interdiffusion of Nb in the austenite matrix of Ni-based superalloys is important for studying the precipitation reactions (Laves phase, γ″-precipitates and δ-phase) and homogenization of the as-cast structure, there is no… read more here.
Keywords: diffusion; niobium cast; diffusion niobium; diffusion couple ... See more keywords
Influence of the 3D architecture and surface roughness of SiOC anodes on bioelectrochemical system performance: a comparative study of freeze-cast, 3D-printed, and tape-cast materials with uniform composition
Sign Up to like & getrecommendations! Published in 2024 at "Materials for Renewable and Sustainable Energy"
DOI: 10.1007/s40243-023-00253-4
Abstract: 3D-printed anodes for bioelectrochemical systems are increasingly being reported. However, comparisons between 3D-printed anodes and their non-3D-printed counterparts with the same material composition are still lacking. In addition, surface roughness parameters that could be correlated… read more here.
Keywords: composition; freeze cast; surface roughness; surface ... See more keywords
Shallow Cryogenic Treatment (SCT) Effects on the Mechanical Properties of High Cr Cast Iron: Low-Carbon Cast Steel Bimetallic Casting
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-020-00532-0
Abstract: The shallow cryogenic (subzero) treatment (SCT) effect on the mechanical properties of the bimetallic casting used in the crushing industry has been investigated. Examination methods include sand casting, heat treatment and SCT, Charpy impact test,… read more here.
Keywords: shallow cryogenic; bimetallic casting; treatment; mechanical properties ... See more keywords
Serial casting for early onset scoliosis and its effects on health-related quality of life during and after discontinuation of treatment.
Sign Up to like & getrecommendations! Published in 2020 at "Spine deformity"
DOI: 10.1007/s43390-020-00175-5
Abstract: INTRODUCTION Serial body casting plays an important role in the treatment of early onset scoliosis (EOS), serving as a safer method compared to surgical intervention. There is no published evidence documenting the impact of casting… read more here.
Keywords: etiology; idiopathic etiology; treatment; non idiopathic ... See more keywords