Experimental investigation and numerical analysis of the dynamic characteristics of a laminated hybrid composite bed
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23555
Abstract: To maximize the productivity of precise products in manufacturing industries, machine tools should be operated at high speeds. The machine tools should withstand higher cutting speeds, higher acceleration and deceleration and should be cost effective… read more here.
Keywords: composite bed; bed; cast iron; laminated hybrid ... See more keywords
Effect of the Time and Temperature of Isothermal Quenching on Microstructure and Mechanical Properties of Bainitic Gray Cast Iron
Sign Up to like & getrecommendations! Published in 2020 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-020-00460-0
Abstract: Mechanical properties of copper-alloyed bainitic gray cast iron are studied after isothermal quenching for bainite at different temperatures and holds. The microstructure of the iron is determined by optical and scanning electron microscopy and x-ray… read more here.
Keywords: gray cast; mechanical properties; cast iron; iron ... See more keywords
On the Solidification and Structure Formation during Casting of Large Inserts in Ferritic Nodular Cast Iron
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1221-z
Abstract: The graphite nodule count and size distributions for boiling water reactor (BWR) and pressurized water reactor (PWR) inserts were investigated by taking samples at heights of 2160 and 1150 mm, respectively. In each cross section, two… read more here.
Keywords: structure formation; cast iron; solidification structure; solidification ... See more keywords
Rolling Contact Fatigue Failure Mechanisms of Plasma-Nitrided Ductile Cast Iron
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2717-4
Abstract: Rolling contact fatigue (RCF) of a nitrided ductile cast iron was investigated. Flat washers machined from a pearlitic ductile cast iron bar were quenched and tempered to maximum hardness, ground, polished and divided into four… read more here.
Keywords: ductile cast; cast iron; rolling contact; plasma nitrided ... See more keywords
Size Determination of the Grains in a Plasma-Sprayed Cast Iron Splat Based on the Heat Transfer Between the Splat and the Substrate
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-018-0789-9
Abstract: The size of the grains formed in individual splats has a significant effect on the properties of a thermally sprayed coating. In this work, the grain size in a plasma-sprayed cast iron splat was predicted… read more here.
Keywords: sprayed cast; plasma sprayed; size; cast iron ... See more keywords
Effect of Soaking Temperature on Carbide Precipitation, Hardness, and Wear Resistance of High-Chromium Cast Iron
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-020-00836-7
Abstract: Different variants of high-chromium cast iron are commonly used for wear-resistant applications in mining and steel industries. These alloys are often used in the as-cast condition that limits the optimization of wear properties through microstructural… read more here.
Keywords: wear resistance; hardness; resistance; cast iron ... See more keywords
Dry Wear Behavior of Cladded NiCoCrAlY Coating on Cast Iron at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03858-1
Abstract: To improve the service life of valve retainer in the engine exhaust system, the NiCoCrAlY alloy coating was fabricated on compacted graphite cast iron by laser cladding. Microstructure and high-temperature wear resistance of the coating… read more here.
Keywords: wear behavior; behavior cladded; cast iron; dry wear ... See more keywords
Iron technology and medieval nomadic communities of East Mongolia
Sign Up to like & getrecommendations! Published in 2017 at "Archaeological and Anthropological Sciences"
DOI: 10.1007/s12520-017-0553-y
Abstract: Numerous iron objects from the medieval sites in Mongolia were metallographically examined for a comparative study intending to probe indigenous and foreign impacts on the establishment of local iron tradition. The artifact assemblage includes iron… read more here.
Keywords: iron technology; technology medieval; iron objects; cast iron ... See more keywords
Provision of iron objects in the southern borderlands of the Han Empire: a metallurgical study of iron objects from Han tombs in Guangzhou
Sign Up to like & getrecommendations! Published in 2020 at "Archaeological and Anthropological Sciences"
DOI: 10.1007/s12520-020-01185-0
Abstract: It is widely acknowledged that the iron industry developed during the Han period led to the widespread distribution of iron implements, but how such iron implements were supplied to the peripheries, especially the southern frontiers… read more here.
Keywords: objects han; tombs guangzhou; iron objects; cast iron ... See more keywords
Effect of Pressure on Graphite Morphology and Mechanical Properties of Squeeze Cast Hyper-Eutectic Grey Cast Iron
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-018-1278-z
Abstract: Squeeze casting is a process in which a high external pressure is applied and maintained on the molten metal during the whole solidification process resulting in the lower porosity, higher solidification rate and improved mechanical… read more here.
Keywords: eutectic grey; cast iron; grey cast; pressure ... See more keywords
Abrasive Wear of Compacted Graphite Cast Iron with Added Tin
Sign Up to like & getrecommendations! Published in 2018 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-018-0504-8
Abstract: The abrasive wear behavior of traditional compacted graphite cast iron (CGI) and compacted graphite cast iron with 0.1% tin addition (CGI–Sn) is studied using a pin-on-disk tribometer. The microstructures of these two CGIs were observed… read more here.
Keywords: compacted graphite; graphite cast; abrasive wear; cast iron ... See more keywords