Modeling on the Composition Spatial Distribution of Inclusions in Steel Continuous‐Casting Blooms with Considering Element Segregation
Sign Up to like & getrecommendations! Published in 2025 at "steel research international"
DOI: 10.1002/srin.202500826
Abstract: One of the most important key technologies to ensure a good‐quality continuous‐casting bloom is the accurate identification, prediction, and control of the composition of inclusions. In the current article, a comprehensive numerical model is established… read more here.
Keywords: composition; bloom; steel continuous; casting ... See more keywords
Effect of Ultrasonic Stir Casting Technique on Mechanical and Tribological Properties of Aluminium–Multi-walled Carbon Nanotube Nanocomposites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-0331-8
Abstract: This paper studies the enhancement of the mechanical and tribological properties of multi-walled carbon nanotubes (MWCNT)-reinforced aluminium nanocomposites prepared by ultra-sonication-assisted stir casting method. The investigations were made to assess the effect of MWCNT weight… read more here.
Keywords: tribological properties; mechanical tribological; walled carbon; stir casting ... See more keywords
Effect of Heat Treatment on the Characterizations of Functionally Graded Al/Al2Cu Fabricated by Horizontal Centrifugal Casting
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-019-00401-5
Abstract: In the present paper, in situ centrifugal casting as an advanced material processing method is proposed to fabricate Al–26 wt% Cu–7wt% Si FG pipe with the density of 3.5 g/cm3 and with the wear resistance of 1.85064 × 10−16 m3/mN.… read more here.
Keywords: heat treatment; casting; effect heat; centrifugal casting ... See more keywords
Probabilistic Property Modeling for Reliable Casting Design and Production
Sign Up to like & getrecommendations! Published in 2025 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-024-01535-x
Abstract: A new methodology leverages virtual casting process simulations to predict the statistical distribution of local mechanical properties, based on computed local microstructures and defects. The extensive result sets generated from each simulation can be statistically… read more here.
Keywords: modeling reliable; reliable casting; property modeling; casting ... See more keywords
Numerical modelling and experimental validation of the effect of ultrasonic melt treatment in a direct-chill cast AA6008 alloy billet
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.03.061
Abstract: Abstract In this work, we study how ultrasonic cavitation melt treatment (UST) affects the temperature distribution, sump profile, and resulting microstructure in the direct-chill (DC) casting of an AA6008 aluminum alloy. Two 152 mm diameter… read more here.
Keywords: casting; melt treatment; direct chill; alloy ... See more keywords
Extraction of collagen powder from chrome containing leather waste and its composites with alumina employing different casting techniques
Sign Up to like & getrecommendations! Published in 2020 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.123274
Abstract: Abstract Nowadays, manufacturing industries are focusing on the green manufacturing approach. In this approach, products are manufactured without harming the environment. Utilization of industrial waste is one of the big challenges faced by worldwide. In… read more here.
Keywords: collagen; collagen powder; waste; casting ... See more keywords
Utility of a modified vascular corrosion casting technique in the diagnosis of fetal total anomalous pulmonary venous connection
Sign Up to like & getrecommendations! Published in 2021 at "Scientific Reports"
DOI: 10.1038/s41598-021-90681-x
Abstract: Total anomalous pulmonary venous connection (TAPVC) is a rare congenital cardiac malformation, and prenatal detection of TAPVC malformation remains a challenging. TAPVC can be easily missed or misdiagnosed in prenatal examinations. This study was aimed… read more here.
Keywords: anomalous pulmonary; casting; tapvc; casting technique ... See more keywords
Efficacy of serial casting protocols in idiopathic toe-walking
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Pediatric Rehabilitation Medicine"
DOI: 10.3233/prm-230041
Abstract: OBJECTIVE: Idiopathic toe-walking (ITW) is a diagnosis of exclusion. A relationship between ITW and decreased range of motion (ROM) is postulated. Treatments focus on increasing ankle dorsiflexion including serial casting. There is no consensus for… read more here.
Keywords: week; rom; toe walking; idiopathic toe ... See more keywords
Numerical Simulation of Ultrasonic Field During Five-Source Ultrasound-Assisted Casting of 2219 Al Alloy
Sign Up to like & getrecommendations! Published in 2025 at "Coatings"
DOI: 10.3390/coatings15101151
Abstract: In this study, the distribution of the acoustic pressure field and cavitation threshold region in Al alloy casting under two five-source ultrasound arrangements (A and B) is investigated, aiming to optimize the five-source ultrasound configuration… read more here.
Keywords: five source; simulation; casting; source ultrasound ... See more keywords
Automatic Casting Control Method of Continuous Casting Based on Improved Soft Actor–Critic Algorithm
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13040820
Abstract: Continuous casting production is an important stage in smelting high-quality steel, and automatic casting control based on artificial intelligence is a key technology to improve the continuous casting process and the product quality. By controlling… read more here.
Keywords: casting; algorithm; automatic casting; continuous casting ... See more keywords
Effect of Hot-Dipped Tin Coating Treatment on Metallurgical Bonds Between AZ91D and Cu by Composite Casting
Sign Up to like & getrecommendations! Published in 2024 at "Metals"
DOI: 10.3390/met14121404
Abstract: Mg-Cu bimetallic materials have been widely studied because of their low density, good electrical conductivity, and excellent hydrogen storage properties. However, the interface bonding strength of Mg/Cu is low. In this study, we examined the… read more here.
Keywords: effect hot; composite casting; casting; metallurgical bonds ... See more keywords