Investigations on the Melt Flow Behavior and Microstructure of A390 Alloy During Vertical Centrifugal Casting Process: CFD Simulation and Experiments
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02037-0
Abstract: In this study, vertical centrifugal casting process is used for the fabrication of functionally graded A390 alloy hollow cylinder and Mg & Sr-included A390 alloy hollow cylinder. The commercial CFD software FLOW3D™ is used to… read more here.
Keywords: a390 alloy; vertical centrifugal; casting process; centrifugal casting ... See more keywords
Control of Jet Flow Angle in Continuous Casting Process using an Electromagnetic Brake
Sign Up to like & getrecommendations! Published in 2019 at "IFAC-PapersOnLine"
DOI: 10.1016/j.ifacol.2019.09.169
Abstract: Abstract The flow pattern in the mould of the continuous casting is an important factor in determining the quality of the steel slabs that are produced in the end of the process. Hence it can… read more here.
Keywords: electromagnetic brake; jet; casting process; continuous casting ... See more keywords
Multiphase modelling of the transient flow for Sn-15Pb and 357.0 alloys in semi-solid die casting process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2019.116534
Abstract: Abstract The transient flow behavior of the semi-solid slurries for Sn-15Pb and 357.0 alloys during die casting process is investigated by experimental and numerical methods. A model for the transient-state three-dimensional multiphase flow based on… read more here.
Keywords: semi solid; casting process; die casting; transient ... See more keywords
Development of an aluminum compound casting process - Experiments and numerical simulations
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2019.116578
Abstract: Abstract The casting of liquid melt on a preheated substrate layer to produce a metallurgical compound represents a direct approach towards clad aluminum strips. To investigate this direct process route and the formation of a… read more here.
Keywords: casting process; compound casting; model; compound ... See more keywords
Numerical simulation for the investment casting process of a large-size titanium alloy thin-wall casing
Sign Up to like & getrecommendations! Published in 2018 at "Progress in Natural Science: Materials International"
DOI: 10.1016/j.pnsc.2018.06.005
Abstract: Abstract To optimize the investment casting process when producing high quality large-size titanium alloy thin-wall components is a time-consuming job due to the complicated metallurgical process. Numerical simulation is a high-efficiency method compared with trial… read more here.
Keywords: titanium alloy; numerical simulation; casting process; investment casting ... See more keywords
Optimisation of Die Casting Process in Zamak Alloys
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.07.145
Abstract: Abstract The casting industry is one of the major industries in the world with a great impact in everybody‘s life. Die casting is a process where a permanent mould is used, and melted metal is… read more here.
Keywords: casting process; optimisation die; die casting; zamak alloys ... See more keywords
Optimization of mechanical properties using D-optimal factorial design of experiment: Electromagnetic stir casting process of A357−SiC nanocomposite
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65288-8
Abstract: Abstract Electromagnetic stir casting process of A357−SiC nanocomposite was discussed using the D-optimal design of experiment (DODOE) method. As the main objective, nine random experiments obtained by DX-7 software were performed. By this method, A357−SiC… read more here.
Keywords: process a357; casting process; stir casting; a357 ... See more keywords
Development of rare earth element-based hybrid aluminium composites using stir casting process
Sign Up to like & getrecommendations! Published in 2024 at "Scientific Reports"
DOI: 10.1038/s41598-024-78811-7
Abstract: Aerospace and marine industries are constantly in search of materials that can provide good strength and durability while also being lightweight. Aluminium composites with adequate reinforcements have been proven to be effective in achieving incredible… read more here.
Keywords: stir casting; aluminium composites; aluminium; hybrid aluminium ... See more keywords
Process parameter effects on solidification behavior of the superalloy during investment casting
Sign Up to like & getrecommendations! Published in 2019 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2019.1666989
Abstract: ABSTRACT The dependencies of solidification parameters of complex castings on microstructure at a microscopic scale were investigated by numerical simulation combined with physical simulation. A novel high-throughput experiment is proposed to establish the relationship of… read more here.
Keywords: parameter effects; casting process; solidification; process parameter ... See more keywords
A Dual Closed-Loop Digital Twin Construction Method for Optimizing the Copper Disc Casting Process
Sign Up to like & getrecommendations! Published in 2024 at "IEEE/CAA Journal of Automatica Sinica"
DOI: 10.1109/jas.2023.123777
Abstract: The copper disc casting machine is core equipment for producing copper anode plates in the copper metallurgy industry. The copper disc casting machine casting package motion curve (CPMC) is significant for precise casting and efficient… read more here.
Keywords: copper; copper disc; casting process; disc casting ... See more keywords
Optimization of the tape casting process for the development of high performance silicon nitride substrate
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Applied Ceramic Technology"
DOI: 10.1111/ijac.12679
Abstract: In this paper, tape casting of Si3N4 substrate were investigated and optimized. The effects of dispersant content, binder, plasticizer/binder ratio, and solid loading on the green sheet properties were studied. An optimal formulation for the… read more here.
Keywords: optimization tape; tape casting; casting process; tape ... See more keywords