Catalytic Cracking of Lactide and Poly(Lactic Acid) to Acrylic Acid at Low Temperatures
Sign Up to like & getrecommendations! Published in 2017 at "Chemsuschem"
DOI: 10.1002/cssc.201700108
Abstract: Abstract Despite being a simple dehydration reaction, the industrially relevant conversion of lactic acid to acrylic acid is particularly challenging. For the first time, the catalytic cracking of lactide and poly(lactic acid) to acrylic acid… read more here.
Keywords: catalytic cracking; acid acrylic; acrylic acid; cracking lactide ... See more keywords
Catalytic Transfer Hydrogenation of Ethyl Levulinate to γ-Valerolactone Over Ni Supported on Equilibrium Fluid-Catalytic-Cracking Catalysts
Sign Up to like & getrecommendations! Published in 2020 at "Catalysis Letters"
DOI: 10.1007/s10562-020-03326-5
Abstract: Nickel supported on equilibrium fluid-catalytic-cracking catalysts (Ni/E-cats) were prepared by a simple grinding-pyrolysis method and employed for the transfer hydrogenation of ethyl levulinate (EL) to γ-valerolactone (GVL). 96.2% selectivity of GVL and 90.3% conversion of… read more here.
Keywords: catalytic cracking; hydrogenation; fluid catalytic; cracking catalysts ... See more keywords
Production of gasoline range hydrocarbons from catalytic cracking of linoleic acid over various acidic zeolite catalysts
Sign Up to like & getrecommendations! Published in 2018 at "Environmental Science and Pollution Research"
DOI: 10.1007/s11356-018-3223-4
Abstract: Employment of edible oils as alternative green fuel for vehicles had raised debates on the sustainability of food supply especially in the third-world countries. The non-edible oil obtained from the abundantly available rubber seeds could… read more here.
Keywords: catalytic cracking; linoleic acid; range hydrocarbons; gasoline range ... See more keywords
Synthesis and performance of pillared HZSM-5 nanosheet zeolites for n-decane catalytic cracking to produce light olefins
Sign Up to like & getrecommendations! Published in 2019 at "Applied Catalysis A: General"
DOI: 10.1016/j.apcata.2018.12.029
Abstract: Abstract Owing to the hierarchical porosity and proper acid site, nanosheet ZSM-5 zeolite (ZN-2) has been reported good performance for catalytic cracking of hydrocarbons, but faces mesopores sacrifice by interlayer condensation after calcination during preparation.… read more here.
Keywords: catalytic cracking; performance; light olefins; nanosheet ... See more keywords
Correlation between structure, acidity and activity of Mo-promoted Pt/ZrO2-TiO2-Al2O3 catalysts for n-decane catalytic cracking
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.10.006
Abstract: Abstract A series of Pt/MoO 3 /ZrO 2 -TiO 2 -Al 2 O 3 composite oxides with various MoO 3 contents were prepared by incipient wetness impregnation method, and coated on the inner wall of… read more here.
Keywords: correlation structure; catalytic cracking; structure acidity; spectroscopy ... See more keywords
Numerical simulation and optimization of an industrial fluid catalytic cracking regenerator
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.10.060
Abstract: Abstract Fluid catalytic cracking (FCC) is one of the most important conversion processes in petroleum refineries. FCC regenerator is a key part of an FCC unit to recover the solid catalyst reactivity by burning off… read more here.
Keywords: fluid; fluid catalytic; catalytic cracking; regenerator ... See more keywords
Mathematical modelling of catalytic cracking riser reactor
Sign Up to like & getrecommendations! Published in 2017 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2017.04.098
Abstract: Abstract The quality and the yield of gasoline and light olefins from the catalytic cracking unit depend on a broad range of operation indicators including the feedstock composition, the process conditions, the type and activity… read more here.
Keywords: temperature; catalytic cracking; composition; mathematical modelling ... See more keywords
Optimal process for catalytic cracking of higher olefins on ZSM-5
Sign Up to like & getrecommendations! Published in 2018 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2018.04.060
Abstract: Abstract Microkinetic models allow extrapolation out of the experimentally covered reaction conditions, which makes them suitable for reactor design. However, efficiency of a proposed reactor setup is hard to assess without considering the whole process… read more here.
Keywords: optimal process; olefins zsm; catalytic cracking; process ... See more keywords
Kinetic modeling for catalytic cracking of pyrolysis oils with VGO in a FCC unit
Sign Up to like & getrecommendations! Published in 2017 at "Chemical Engineering Science"
DOI: 10.1016/j.ces.2017.01.048
Abstract: Abstract A 5-lump kinetic model is proposed and validated to mean the catalytic cracking of pyrolysis oils with equilibrium fluid catalytic cracking catalyst (E-CAT) in an advanced cracking evaluation (ACE-R) FCC unit. In the present… read more here.
Keywords: cracking pyrolysis; vgo; pyrolysis oils; catalytic cracking ... See more keywords
Comparing the pozzolanic activity of aerial lime mortars made with metakaolin and fluid catalytic cracking catalyst residue: A petrographic and physical-mechanical study
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.07.002
Abstract: Abstract We investigated the viability of a fluid catalytic cracking catalyst residue (FC3R) as an alternative sustainable pozzolanic additive in aerial lime mortars. The pozzolanic activity of FC3R was compared to that of metakaolin (MK)… read more here.
Keywords: aerial lime; catalytic cracking; fluid catalytic; lime mortars ... See more keywords
Exploring structural features of USY zeolite in the catalytic cracking of Jatropha Curcas L. seed oil towards higher gasoline/diesel yield and lower CO2 emission
Sign Up to like & getrecommendations! Published in 2017 at "Fuel"
DOI: 10.1016/j.fuel.2017.04.073
Abstract: Abstract Fluid catalytic cracking (FCC) is one of the main processes for gasoline/diesel production in the oil refining industry, it is a challenge to design catalyst towards high gasoline/diesel yield and low coke formation (i.e.… read more here.
Keywords: seed; catalytic cracking; yield; gasoline diesel ... See more keywords