Mass transfer and cell performance of a unitized regenerative fuel cell with nonuniform depth channel in oxygen‐side flow field
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Energy Research"
DOI: 10.1002/er.4472
Abstract: In this study, the cell performance of nonuniform depth and conventional straight channel in a unitized regenerative fuel cell (URFC) is compared. Various shapes of oxygen‐side channel cases are also proposed. Several parameters, such as… read more here.
Keywords: cell performance; channel; nonuniform depth; cell ... See more keywords
Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Energy Research"
DOI: 10.1002/er.7269
Abstract: The object of this study is the manufacturing processes and fluorinated ethylene propylene (FEP) contents on the cell performance of the proton exchange membrane fuel cell (PEMFC). These results are useful for optimizing gas diffusion… read more here.
Keywords: fuel cell; performance; water; cell ... See more keywords
Mathematical modeling of direct ethylene glycol fuel cells incorporating the effect of the competitive adsorption
Sign Up to like & getrecommendations! Published in 2019 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2018.10.073
Abstract: Abstract In this work, a one-dimensional mathematical model for a direct ethylene glycol fuel cell using hydrogen peroxide as oxidant is developed. This model considers the ethylene glycol crossover and the competitive adsorption between ethylene… read more here.
Keywords: ethylene; model; cell performance; ethylene glycol ... See more keywords
Kinetics of electrochemical charge transfer in HT-PEM fuel cells
Sign Up to like & getrecommendations! Published in 2019 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2018.09.171
Abstract: Abstract This paper presents experimental and modeling study of high temperature polymer electrolyte membrane fuel cell performance. The experiments are performed using in-house prepared MEA with an active area of 2.25 cm2. The experiments are simulated… read more here.
Keywords: fuel; cell performance; kinetics electrochemical; charge transfer ... See more keywords
Combination of physico-chemical entrapment and crosslinking of low activity laccase-based biocathode on carboxylated carbon nanotube for increasing biofuel cell performance.
Sign Up to like & getrecommendations! Published in 2017 at "Enzyme and microbial technology"
DOI: 10.1016/j.enzmictec.2017.06.012
Abstract: New laccase-based catalysts to improve oxygen reduction reactions (ORR) are described, and enzymatic biofuel cells (EBCs) adopting these catalysts were developed. These new catalysts are synthesized by combining laccase, poly(ethylenimine) and carbon nanotubes, with attachment… read more here.
Keywords: cell performance; biofuel cell; laccase; performance ... See more keywords
Porous nickel-iron alloys as anode support for intermediate temperature solid oxide fuel cells: II. Cell performance and stability
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2018.09.142
Abstract: Abstract Porous nickel–iron alloy supported solid oxide fuel cells (SOFCs) are fabricated through cost-effective ceramic process including tape casting, screen printing and co-sintering. The cell performance is characterized with humidified hydrogen as the fuel and… read more here.
Keywords: cell performance; iron; stability; nickel iron ... See more keywords
Immobilized phosphotungstic acid for the construction of proton exchange nanocomposite membranes with excellent stability and fuel cell performance
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2020.04.159
Abstract: Abstract Phosphotungstic acid (HPW) has a good potential as nanofillers in nanocomposite proton exchange membrane with the prerequisite of solving the leakage issue. It is immobilized onto mesoporous graphitic carbon nitride (mg-C3N4) nanosheets surface, and… read more here.
Keywords: cell performance; fuel cell; spaes; hpw ... See more keywords
Mechanism of the cathode current collector on cell performance in a solid oxide fuel cell stack
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2017.03.105
Abstract: Abstract In this work, we report a new design of the contact layer to investigate the significance and mechanism for the cathodic current collection. The single cells in a stack are covered with Ag paste… read more here.
Keywords: stack; mechanism; cell performance; cathode ... See more keywords
Review of cell performance in anion exchange membrane fuel cells
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2017.07.117
Abstract: Abstract Anion exchange membrane fuel cells (AEMFCs) have recently received increasing attention since in principle they allow for the use of non-precious metal catalysts, which dramatically reduces the cost per kilowatt of power in fuel… read more here.
Keywords: cell performance; cell; anion exchange; performance ... See more keywords
Synthesis of plasma polymerized PEM with pillar surface structure and its fuel cell performance
Sign Up to like & getrecommendations! Published in 2018 at "Materials Research Bulletin"
DOI: 10.1016/j.materresbull.2017.12.010
Abstract: Abstract Proton exchange membrane (PEM) is synthesized successfully by plasma polymerization technique in RF plasma discharge. The chemical composition of the prepared membranes is examined by FTIR analyses. SEM and AFM analysis of the membrane… read more here.
Keywords: plasma; cell performance; pillar surface; structure ... See more keywords
Enhanced solar cell performance of P3HT:PCBM by SnS nanoparticles
Sign Up to like & getrecommendations! Published in 2020 at "Solar Energy"
DOI: 10.1016/j.solener.2020.02.031
Abstract: Abstract In this research, un- and zinc (Zn)-doped tin sulfide (SnS) nanoparticles (NPs) were synthesized by ultrasound method and added to the active layer of ITO/PEDOT:PSS/P3HT: PCBM/Al polymer solar cells (PSCs). The structural, optical, and… read more here.
Keywords: cell performance; solar cell; p3ht pcbm; performance ... See more keywords