Laminated Object Manufacturing of Ceramic‐Based Materials
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000256
Abstract: Since their inception, additive manufacturing (AM) techniques have been the go‐to methods for obtaining highly complex‐shaped rapid prototypes (RPs) and specialized parts, which were produced in small lot sizes. The AM technique of laminated object… read more here.
Keywords: laminated object; object manufacturing; based materials; ceramic based ... See more keywords
Structural Electromagnetic Absorber Based on MoS2 /PyC-Al2 O3 Ceramic Metamaterials.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202300664
Abstract: Limited by the types of suitable absorbents as well as the challenges in engineering the nanostructures (e.g., defects, dipoles, and hetero-interface) using state-of-the-art additive manufacturing (AM) techniques, the electromagnetic (EM) wave absorption performance of the… read more here.
Keywords: pyc al2; mos2 pyc; ceramic based; al2 ceramic ... See more keywords
Study of Porous Ceramic Based on Silicon Nitride Prepared Using Three-Dimensional Printing Technology
Sign Up to like & getrecommendations! Published in 2017 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-017-0030-2
Abstract: Results are given for a study of the microstructure, composition, and mechanical properties of ceramic based on silicon nitride prepared using three-dimensional printing technology and reaction sintering. In order to prepare workpieces of silicon powder… read more here.
Keywords: three dimensional; based silicon; silicon nitride; dimensional printing ... See more keywords
Effect of Additive Composition in the Al2O3–MgO–MnO System and Firing Temperature on Sintering of Composite Ceramic Based on Electromelted Corundum
Sign Up to like & getrecommendations! Published in 2018 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-018-0233-1
Abstract: The effect of eutectic composition additive content in the Al2O3–MgO–MnO system on sintering of structural ceramic based on electrocorundum is studied. The starting material used is electrocorundum grade F-1000 with an average particle size of… read more here.
Keywords: mno system; al2o3 mgo; al2o3; mno ... See more keywords
Synthesis and characterization of superoleophobic fumed alumina nanocomposite coated via the sol-gel process onto ceramic-based hollow fibre membrane for oil-water separation
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.05.319
Abstract: Abstract Oily wastewater treatment is a global challenge due to the substantial amount of effluent resulted from many industrial and domestic activities. To overcome the challenge of using existing treatment approach and fouling, superoleophobic coatings… read more here.
Keywords: sol gel; spectroscopy; separation; oil ... See more keywords
Ceramic-based membranes for water and wastewater treatment
Sign Up to like & getrecommendations! Published in 2019 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2019.05.074
Abstract: Abstract A critical review on current status and future perspectives of ceramic-based membranes for water and wastewater treatment is given. Common ceramic membranes made of alumina, zirconia, titania, silica and zeolite are described, and their… read more here.
Keywords: water wastewater; wastewater treatment; based membranes; ceramic based ... See more keywords
Ceramic-based microbial fuel cells (MFCs): A review
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2016.06.054
Abstract: Abstract Recently, porous ceramic and clayware membranes have been widely used in microbial fuel cells (MFCs) as separators. Chemical, thermal and mechanical stability, low-cost and many other advantages of ceramic membranes make them an appropriate… read more here.
Keywords: fuel cells; ceramic based; cells mfcs; microbial fuel ... See more keywords
A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.02.016
Abstract: Abstract Many substrates for microelectronic systems contain ceramic/glass layers and metal features (e.g. electrodes, vias, metal pads) built up in a complex 3D architecture. The combination of different materials with distinct thermo-elastic properties may yield… read more here.
Keywords: novel approach; mechanical reliability; approach assess; ceramic based ... See more keywords
Engineering Nano-Composite Interlayer for Novel Ceramic-based Forward Osmosis Membrane with Enhanced Performance.
Sign Up to like & getrecommendations! Published in 2020 at "Environmental science & technology"
DOI: 10.1021/acs.est.0c02809
Abstract: Rational design of high-performance defect-free polyamide (PA) layer on robust ceramic substrate is challenging for forward osmosis (FO) water treatment applications. In this study, we first demonstrated a robust ceramic-based thin-film composite (TFC) FO membrane… read more here.
Keywords: nano composite; interlayer; performance; membrane ... See more keywords
Toughening Ceramic-Based Composites by Homogenizing the Lattice Strain at Phase Boundaries.
Sign Up to like & getrecommendations! Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c00251
Abstract: Ceramic-based composites generally have low fracture toughness, and toughening these materials without sacrificing their hardness has been a big challenge. This study presents an approach for toughening ceramic-based composites by modulating the strain partition and… read more here.
Keywords: based composites; ceramic based; strain; homogenizing lattice ... See more keywords
Strengthening of Ceramic-based Artificial Nacre via Synergistic Interactions of 1D Vanadium Pentoxide and 2D Graphene Oxide Building Blocks
Sign Up to like & getrecommendations! Published in 2017 at "Scientific Reports"
DOI: 10.1038/srep40999
Abstract: Nature has evolved hierarchical structures of hybrid materials with excellent mechanical properties. Inspired by nacre’s architecture, a ternary nanostructured composite has been developed, wherein stacked lamellas of 1D vanadium pentoxide nanofibres, intercalated with water molecules,… read more here.
Keywords: vanadium pentoxide; graphene oxide; strengthening ceramic; mechanical properties ... See more keywords