Thermally induced delamination and buckling of a ceramic coating with temperature-dependent material properties from porous substrate at high temperatures
Sign Up to like & getrecommendations! Published in 2020 at "Acta Mechanica"
DOI: 10.1007/s00707-020-02624-8
Abstract: Ceramic coatings are ideal materials for thermal protection systems such as the thermal shield of the space shuttle. In a high-temperature environment, material properties of ceramics strongly depend on the temperature. The severe mismatch of… read more here.
Keywords: delamination buckling; material properties; temperature; ceramic coating ... See more keywords
A facile method to enhance the uniformity and adhesion properties of water-based ceramic coating layers on hydrophobic polyethylene separators
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.07.276
Abstract: Abstract To enhance the uniformity and adhesion properties of water-based ceramic coating layers on hydrophobic polyethylene (PE) separators, their surfaces were treated with thin and hydrophilic polydopamine layers. As a result, an aqueous ceramic coating… read more here.
Keywords: water; layer; coating; ceramic coating ... See more keywords
A ceramic coating on carbon steel and its superhydrophobicity
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.04.235
Abstract: Abstract In this work, we present a combined method to produce a superhydrophobic ceramic coating on carbon steel. A hot-dip aluminizing approach is proposed for fabricating an aluminum coating on the carbon steel surface. This… read more here.
Keywords: carbon steel; ceramic coating; coating carbon; coating ... See more keywords
Solidification mechanism and microstructure evolution of Al2O3-ZrO2 ceramic coating prepared by combustion synthesis and thermal explosion spraying
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2016.11.153
Abstract: Abstract The solidification mechanism and microstructure of the hypoeutectic Al 2 O 3 -ZrO 2 (Al 2 O 3 :72 mol%) ultra-fined ceramic coating prepared by combustion synthesis and rapid plate cooling method were analyzed by… read more here.
Keywords: solidification; mechanism microstructure; ceramic coating; zro ... See more keywords
Effect of micro-groove on microstructure and performance of MAO ceramic coating fabricated on the surface of aluminum alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.10.374
Abstract: Abstract Micro-arc oxidation (MAO) ceramic coatings on the surface of aluminum alloy substrates with and without micro-groove have been successfully fabricated in the Na2SiO3-NaOH-EDTA-2Na solution. Microstructure characterization indicated that the micro-grooves on substrate surface could… read more here.
Keywords: surface; mao; micro groove; mao ceramic ... See more keywords
A novel ultra-high-temperature oxidation protective MoSi2-TaSi2 ceramic coating for tantalum substrate
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2019.02.037
Abstract: Abstract To protect refractory metal against oxidation at ultra-high temperatures, a MoSi2-TaSi2 ceramic coating was prepared on a pure tantalum (Ta) substrate using a novel three-step process, which included dip-coating with a molybdenum slurry, vacuum… read more here.
Keywords: mosi2 tasi2; ceramic coating; ultra high; high temperature ... See more keywords
Insights into arc-assisted self-propagating high temperature synthesis of TiB2-TiC ceramic coating via wire-arc deposition
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.05.005
Abstract: Abstract TiB2-TiC ceramic coating was fabricated by wire-arc deposition of Ti-B4C cored wire in conjunction with self-propagating high temperature synthesis (SHS) technology, to enhance the hardness and wear resistance of Ti. Results showed that a… read more here.
Keywords: wire arc; tib2 tic; tic ceramic; wire ... See more keywords
Formation and characterization of ceramic coating from alumino silicate mineral powders in the matrix of cement composite on the concrete wall
Sign Up to like & getrecommendations! Published in 2019 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2019.02.012
Abstract: Abstract Enhancement of thermal performance of concrete wall is nowadays of great importance in reducing the operational energy demand of buildings. We developed a new kind of inorganic coating material based on SiO 2 -… read more here.
Keywords: mineral; ceramic coating; powder; concrete wall ... See more keywords
Effect of positive pulse voltage on color value and corrosion property of magnesium alloy black micro-arc oxidation ceramic coating
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.05.067
Abstract: Abstract To improve the corrosion resistance of the magnesium alloy and to extend its applications in light absorption field, black anti-corrosion and absorption integrated ceramic coatings were prepared on AZ31 magnesium alloy by asymmetric bipolar… read more here.
Keywords: ceramic coating; corrosion; color value; pulse voltage ... See more keywords
Hierarchical Ceramic Coating Reduces Adherence of Cells, Blood, Bacteria, and Tissue on Titanium Microsurgical Instruments.
Sign Up to like & getrecommendations! Published in 2021 at "Journal of reconstructive microsurgery"
DOI: 10.1055/s-0041-1729881
Abstract: BACKGROUND Progress in the field of microsurgery allows more detailed reconstructions of the smallest tissue structures. The applied instruments are left with biological residues after coming into contact with body fluids or tissue, leading to… read more here.
Keywords: surface; ceramic coating; titanium; blood ... See more keywords
Residual Stress Evaluation in Ceramic Coating Under Industrial Conditions by Digital Holography
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Industrial Informatics"
DOI: 10.1109/tii.2019.2939972
Abstract: In this article, we describe a system suitable for the evaluation of residual stress in ceramic coating under industrial conditions. Laser ablation is used for material removal, and digital holography measures the displacements produced by… read more here.
Keywords: digital holography; industrial conditions; residual stress; ceramic coating ... See more keywords