Design of high-reflectance ceramic materials based on the first-principle calculation
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-04364-5
Abstract: There is a wide range of application requirements of high-infrared-reflectance materials, like laser, marine, aerospace industry and military. Although metal materials have high reflectivity, oxidation and low melting point limit its applications. Ceramic materials have… read more here.
Keywords: ceramic materials; high reflectance; reflectivity; reflectance ... See more keywords
Heat Conduction of Ceramic Materials Based on MgAl2O4 and ZnAl2O4
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Engineering Physics and Thermophysics"
DOI: 10.1007/s10891-020-02171-y
Abstract: Optically transparent samples of ceramic materials based on the magnesium aluminate and zinc aluminate spinels of density close to the theoretically attainable one have been obtained, and their heat conductivity was measured in the temperature… read more here.
Keywords: aluminate; materials based; ceramic materials; heat conductivity ... See more keywords
Preparation of Ceramic Materials Based on TiC–W2C–Co by SHS-Extrusion
Sign Up to like & getrecommendations! Published in 2017 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-017-0050-y
Abstract: This work is devoted to studying production aspects of preparing electrode materials based on TiC–Co precipitation hardened with tungsten carbide particles that form in the course of synthesis from original tungsten and carbon black components… read more here.
Keywords: based tic; materials based; ceramic materials; preparation ceramic ... See more keywords
Sintering of Ceramic Materials Based on Bauxitized Clay of the North-Onezh Deposit. Part 2. Effect of Sintering Additions
Sign Up to like & getrecommendations! Published in 2019 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-019-00277-2
Abstract: The effect of natural additives on aluminosilicate sintering capacity is studied. It is demonstrated that addition of natural alkaline aluminosilicates with predicted viscosity and amount of melt makes it possible to prepare stronger ceramic materials. read more here.
Keywords: sintering ceramic; materials based; ceramic materials; bauxitized clay ... See more keywords
Development of macroporous Magnéli phase Ti4O7 ceramic materials: As an efficient anode for mineralization of poly- and perfluoroalkyl substances
Sign Up to like & getrecommendations! Published in 2018 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2018.07.210
Abstract: Abstract Magneli phase Ti4O7 ceramic materials having extensive interconnecting macropores with an average pore size of 2.6 μm and 21.6% porosity were fabricated using a high-temperature sintering method, and then tested as an anode in a… read more here.
Keywords: ti4o7 ceramic; phase ti4o7; ceramic materials; perfluoroalkyl substances ... See more keywords
Design substantiation of ceramic materials on fusion reactor confinement boundaries
Sign Up to like & getrecommendations! Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.07.001
Abstract: Ceramic components will be used for electrical insulation and optical transparency on the heating and diagnostic systems of fusion reactors. As these form the boundary for the radioactive confinement, a defined procedure is required to… read more here.
Keywords: ceramic materials; design substantiation; confinement; substantiation ceramic ... See more keywords
Recycling of residues from the olive cultivation and olive oil production process for manufacturing of ceramic materials. A comprehensive review
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2021.126436
Abstract: Abstract The production of olive oil generates a huge amount of residues which must be adequately handled, which currently represents both an economic cost and an environmental concern. A possible solution which is under study… read more here.
Keywords: manufacturing ceramic; recycling residues; production; ceramic materials ... See more keywords
A study on thermoelectric performance and magnetic properties of Ti-doped Bi2Sr2Co1.8Oy ceramic materials
Sign Up to like & getrecommendations! Published in 2020 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.123701
Abstract: Abstract Within this study, Bi2Sr2Co1.8-xTixOy ceramic materials (x = 0, 0.05, 0.10, and 0.15) in different forms (bulk, as-grown and annealed fibers) have been produced through the solid state method and textured using the laser floating zone… read more here.
Keywords: performance magnetic; ceramic materials; magnetic properties; bi2sr2co1 8oy ... See more keywords
Additive manufacturing of advanced ceramic materials
Sign Up to like & getrecommendations! Published in 2021 at "Progress in Materials Science"
DOI: 10.1016/j.pmatsci.2020.100736
Abstract: Abstract Additive manufacturing (AM) has the potential to disrupt the ceramic industry by offering new opportunities to manufacture advanced ceramic components without the need for expensive tooling, thereby reducing production costs and lead times and… read more here.
Keywords: manufacturing advanced; ceramic materials; advanced ceramic; additive manufacturing ... See more keywords
Surface Roughness and Hardness of CAD/CAM Ceramic Materials after Polishing with a Multipurpose Polishing Kit: An In Vitro Study
Sign Up to like & getrecommendations! Published in 2022 at "European Journal of Dentistry"
DOI: 10.1055/s-0042-1758065
Abstract: Abstract Objective This article evaluates the effect of multipurpose polishing kit on surface roughness and hardness of three computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials at different polishing durations. Weight changes of the polishing bur were… read more here.
Keywords: cam ceramic; surface roughness; polishing kit; cad cam ... See more keywords
Thermal Elastohydrodynamic Lubrication of Ceramic Materials
Sign Up to like & getrecommendations! Published in 2018 at "Tribology Transactions"
DOI: 10.1080/10402004.2018.1437492
Abstract: ABSTRACT The effect of thermal conductivity on point elastohydrodynamic lubrication (EHL) contacts was discussed with representative engineering ceramics and steel by a non-Newtonian thermal EHL analysis. Through this investigation, fundamentals of EHL characteristics of contact… read more here.
Keywords: ceramic materials; elastohydrodynamic lubrication; tribology; lubrication ceramic ... See more keywords