Leveraging the Synergistic Effect of Ceramic Particles and Shear Thickening Fluid to Develop P‐Aramid Fabric Based Stab‐Resistant Armor
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70594
Abstract: Stab‐resistant armors are essential for police and security forces. However, the mechanisms of failure during stab and bullet impacts are dissimilar due to huge differences in associated impact energy densities. This research aims to design… read more here.
Keywords: resistant armor; stab resistant; ceramic particles; shear thickening ... See more keywords
Composite gel polymer electrolyte with ceramic particles for LiNi1/3Mn1/3Co1/3O2-Li4Ti5O12 lithium ion batteries
Sign Up to like & getrecommendations! Published in 2017 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2017.03.176
Abstract: Abstract In this study, a composite polymer matrix for gel polymer electrolyte (GPE) is prepared by the electrospinning process, combining poly(vinylidene fluoride-co-hexafluoropropylene) and nano-sized Al 2 O 3 ceramic particles. The composite matrix is impregnated… read more here.
Keywords: ceramic particles; gel polymer; polymer; gpe composite ... See more keywords
A new mechanism for laser absorption in high-reflectivity metal powder beds modified with ceramic particles
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Physics"
DOI: 10.1063/5.0252992
Abstract: The high reflectivity of certain metal powders within the infrared laser range hinders the processability and quality of additively manufactured metals via laser powder bed fusion (L-PBF). Here, we report a new mechanism responsible for… read more here.
Keywords: laser; high reflectivity; metal; powder ... See more keywords
Utilization of recycled hazardous waste bagasse as reinforcement to develop green composite material
Sign Up to like & getrecommendations! Published in 2020 at "World Journal of Engineering"
DOI: 10.1108/wje-03-2019-0069
Abstract: In the current scenario, air pollution and soil pollution from the industries wastes are one of the major problems all over the world. Further, disposal of these wastes from industries are very costly. However, several… read more here.
Keywords: composite material; ceramic particles; waste; bagasse ... See more keywords
An experimental study on the bearing strength of pin-loaded ceramic particles filled woven glass/epoxy composites
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Composite Materials"
DOI: 10.1177/00219983221113892
Abstract: The present study experimentally investigates the effect of various ceramic particles and different particle weight fractions on the bearing strength and failure modes of pinned joints in woven glass/epoxy composite plates. The composite plates are… read more here.
Keywords: ceramic particles; bearing strength; weight fractions; glass epoxy ... See more keywords
Comparison of the surface morphologies of ceramic reinforced metal matrix composite cams after wear tests under dry and wet conditions
Sign Up to like & getrecommendations! Published in 2023 at "Journal of Composite Materials"
DOI: 10.1177/00219983231159720
Abstract: The integral engine parts, such as camshaft members, are usually not preferably made of ceramic-reinforced MMC because the margin of compromise on the engine performance is small. However, the lightweight and wear-resistant nature of the… read more here.
Keywords: wet conditions; ceramic particles; ceramic reinforced; wear resistance ... See more keywords
Fabrication of A356-based rolled composites reinforced by Ni–P-coated bimodal ceramic particles
Sign Up to like & getrecommendations! Published in 2018 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/1464420716649631
Abstract: Three arrangements of reinforced A356-based composites were fabricated. Samples with 3 wt% Al2O3 (average particle size: 170 µm), 3 wt% SiC (average particle size: 15 µm), and 3 wt% of mixed Al2O3–SiC powders (each reinforcement… read more here.
Keywords: a356 based; fine sic; ceramic particles; fabrication ... See more keywords
Effect of ceramic particles on the mechanical and tribological properties of short carbon fibre reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2024 at "International Journal of Surface Science and Engineering"
DOI: 10.1504/ijsurfse.2024.136663
Abstract: : In this investigation, an effort has been made to develop the short carbon fibre stiffened epoxy composites (CFSEC) mixed with multi-walled carbon nano-tubes (MWCNT) and silicon carbide particles (SiCp) using a compression moulding process.… read more here.
Keywords: carbon; carbon fibre; particles mechanical; ceramic particles ... See more keywords
How to Improve the Curing Ability during the Vat Photopolymerization 3D Printing of Non-Oxide Ceramics: A Review
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17112626
Abstract: Vat photopolymerization (VP), as an additive manufacturing process, has experienced significant growth due to its high manufacturing precision and excellent surface quality. This method enables the fabrication of intricate shapes and structures while mitigating the… read more here.
Keywords: process; vat photopolymerization; oxide ceramic; non oxide ... See more keywords
Investigating the Interface between Ceramic Particles and Polymer Matrix in Hybrid Electrolytes by Electrochemical Strain Microscopy
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12040654
Abstract: The interface between ceramic particles and a polymer matrix in a hybrid electrolyte is studied with high spatial resolution by means of Electrochemical Strain Microscopy (ESM), an Atomic Force Microscope (AFM)-based technique. The electrolyte consists… read more here.
Keywords: polymer matrix; ceramic particles; matrix hybrid; microscopy ... See more keywords
Improved Wear-Resistant Performance of Epoxy Resin Composites Using Ceramic Particles
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14020333
Abstract: This work investigated the effects of using a new fabrication technique to prepare polymer composite on the wear-resistant performance of epoxy resin composites under dry friction conditions. Polymer composite samples with different weight contents of… read more here.
Keywords: kraft paper; paper; ceramic particles; polymer composite ... See more keywords