Time Domain Characterization of High Power Solid State Amplifiers for the Next Generation Linear Accelerators
Sign Up to like & getrecommendations! Published in 2018 at "Microwave and Optical Technology Letters"
DOI: 10.1002/mop.30926
Abstract: This paper presents the time domain characterization of high power pulsed solid state amplifiers to be used forlinear accelerator applications. The study comprises nonlinear circuit envelope simula ... read more here.
Keywords: solid state; high power; domain characterization; time domain ... See more keywords
Preparation and characterization of high-Tc (YBa2Cu3O7-δ)1-x/(CNTs)x superconductors with highly boosted superconducting performances
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.05.071
Abstract: Abstract This article investigates the impact of carbon nanotubes (CNTs) addition on the morphological, structural, magnetic, and electrical transport properties of the YBa2Cu3O7-δ (noted YBCO) bulk system. Samples were synthesized using the solid-state reaction where… read more here.
Keywords: preparation characterization; high yba2cu3o7; cnts superconductors; yba2cu3o7 cnts ... See more keywords
Characterization of a high-performance edible film based on Salep mucilage functionalized with pennyroyal (Mentha pulegium).
Sign Up to like & getrecommendations! Published in 2019 at "International journal of biological macromolecules"
DOI: 10.1016/j.ijbiomac.2019.04.136
Abstract: Salep mucilage was extracted from salep tubers and used to produce edible films containing pennyroyal extracts (PER) (0, 0.5, 1, and 1.5% v/v) as a new antibacterial/antioxidant edible film, and their physical, mechanical, permeability, thermal,… read more here.
Keywords: edible film; mucilage; salep mucilage; characterization high ... See more keywords
Cross section TEM characterization of high-energy-Xe-irradiated U-Mo
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2017.03.011
Abstract: Abstract U-Mo alloys irradiated with 84 MeV Xe ions to various doses were characterized with transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) techniques. The TEM thin foils were prepared perpendicular to the irradiated… read more here.
Keywords: section tem; microscopy; tem characterization; characterization high ... See more keywords
High-temperature deformation behavior and microstructural characterization of high-Mn bearing titanium-based alloy
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.03.004
Abstract: Abstract Ti-Mn alloys exhibit an excellent potential for biomedical applications as well as structural engineering applications, especially in the aerospace industry. In order to control and enhance grain structure during the manufacturing of Ti-Mn alloys… read more here.
Keywords: alloy; high temperature; deformation; strain ... See more keywords
Characterization of high frequency welded aluminium microfin tube for heat exchangers
Sign Up to like & getrecommendations! Published in 2021 at "Materials Characterization"
DOI: 10.1016/j.matchar.2021.110939
Abstract: Abstract An aluminium alloy tube produced using linear high frequency welding of a strip consisting of a 3xxx-series alloy core with an embossed inner part and a thin 7xxx-series outer clad layer has been investigated… read more here.
Keywords: microscopy; heat; high frequency; tube ... See more keywords
Electrical characterization of high k-dielectrics for 4H-SiC MIS devices
Sign Up to like & getrecommendations! Published in 2019 at "Materials Science in Semiconductor Processing"
DOI: 10.1016/j.mssp.2019.03.025
Abstract: Abstract We report promising results regarding the possible use of AlN or Al2O3 as a gate dielectric in 4H-SiC MISFETs. The crystalline AlN films are grown by hot wall metal organic chemical vapor deposition (MOCVD)… read more here.
Keywords: al2o3; electrical characterization; aln al2o3; characterization high ... See more keywords
Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules.
Sign Up to like & getrecommendations! Published in 2019 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.9b05730
Abstract: Organo-metal halide perovskite demonstrates a large potential for achieving highly efficient photovoltaic devices. The scaling-up process represents one of the major challenges to exploit this technology at the industrial level. Here, the scaling-up of perovskite… read more here.
Keywords: solar modules; perovskite solar; fabrication morphological; characterization high ... See more keywords
In situ characterization of the high pressure – high temperature melting curve of platinum
Sign Up to like & getrecommendations! Published in 2019 at "Scientific Reports"
DOI: 10.1038/s41598-019-49676-y
Abstract: In this work, the melting line of platinum has been characterized both experimentally, using synchrotron X-ray diffraction in laser-heated diamond-anvil cells, and theoretically, using ab initio simulations. In the investigated pressure and temperature range (pressure… read more here.
Keywords: platinum; temperature; situ characterization; high pressure ... See more keywords
Characterization and high piezoelectric performance of Pb(Fe1/2Nb1/2)O3–Pb(In1/2Nb1/2)O3–PbTiO3 ternary ceramics
Sign Up to like & getrecommendations! Published in 2019 at "Inorganic Chemistry Frontiers"
DOI: 10.1039/c9qi01022j
Abstract: The flexible lattice parameters and the lattice strain of an electric-field-induced monoclinic phase at the MPB composition of 0.84PFN–0.07PIN–0.09PT. read more here.
Keywords: high piezoelectric; fe1 2nb1; 2nb1 in1; characterization high ... See more keywords
Synthesis, characterization, and high-pressure studies of a 3D berkelium(III) carboxylate framework material.
Sign Up to like & getrecommendations! Published in 2022 at "Chemical communications"
DOI: 10.1039/d1cc06958f
Abstract: A berkelium(III) mellitate, Bk2[C6(CO2)6](H2O)8·2H2O, was synthesized and rapidly crystallized by reacting mellitic acid, C6(CO2H)6, and BkBr3·nH2O in an aqueous medium. Single crystal X-ray diffraction shows that the compound crystallizes as a three-dimensional framework isostructural with… read more here.
Keywords: berkelium iii; characterization high; framework; iii ... See more keywords