LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "cladding layer" as a keyword



Pulse Phase Dynamic Thermal Tomography Investigation on the Defects of the Solid-Propellant Missile Engine Cladding Layer

Sign Up to like & get
recommendations! Published in 2018 at "International Journal of Thermophysics"

DOI: 10.1007/s10765-018-2366-3

Abstract: Pulse phase dynamic thermal tomography (PP-DTT) was introduced as a nondestructive inspection technique to detect the defects of the solid-propellant missile engine cladding layer. One-dimensional thermal wave mathematical model stimulated by pulse signal was developed… read more here.

Keywords: cladding layer; thermal tomography; dynamic thermal; pulse phase ... See more keywords
Photo from wikipedia

Effect of laser beam incidence angle on cladding morphology in laser cladding process

Sign Up to like & get
recommendations! Published in 2020 at "Journal of Mechanical Science and Technology"

DOI: 10.1007/s12206-020-0315-0

Abstract: The change of angle θ between laser cladding powder plane and substrate plane will lead to changes in cladding layer's geometric morphology. Therefore, we established a quantitative numerical prediction model for cladding layer geometry. In… read more here.

Keywords: laser; laser cladding; morphology; effect ... See more keywords

Effect of CeO2 on the microstructure and microhardensss of laser-cladded Ni60 on 35CrMoV alloys.

Sign Up to like & get
recommendations! Published in 2021 at "Micron"

DOI: 10.1016/j.micron.2021.103146

Abstract: In present work, the effect of CeO2 addition on the crack susceptibility, microstructure, phase composition, solute segregation and microhardness of Ni60 cladding layer was investigated. The coatings were analyzed by scanning electron microscopy (SEM), X-ray… read more here.

Keywords: ni60 cladding; effect ceo2; cladding layer; ceo2 ... See more keywords

Formation of anomalous eutectic in Ni-Sn alloy by laser cladding

Sign Up to like & get
recommendations! Published in 2018 at "Optics and Laser Technology"

DOI: 10.1016/j.optlastec.2017.08.026

Abstract: Abstract Ni-Sn anomalous eutectic is obtained by single track laser cladding with the scanning velocity from 1 mm/s to 10 mm/s using the Ni-32.5 wt.%Sn eutectic powders. The microstructure of the cladding layer and the grain orientations of… read more here.

Keywords: anomalous eutectic; cladding layer; laser cladding; formation anomalous ... See more keywords

Optimizing InAsPSb/InAsP cladding structures to control carrier overflow and enhance emission in multiple quantum well LEDs.

Sign Up to like & get
recommendations! Published in 2025 at "Nanoscale"

DOI: 10.1039/d5nr01108f

Abstract: We fabricated III-V compound semiconductor-based LEDs using InAsSb/InAsPSb multiple quantum wells (MQWs) and investigated the effect of InAsPSb/InAsP cladding structures (doping concentration and thickness) on light emission. The LEDs were categorized into three types: MQW… read more here.

Keywords: mqw; cladding layer; carrier; emission ... See more keywords

Microstructure and properties of multi-layer laser cladding Cu-10Pb-10Sn anti-friction coating

Sign Up to like & get
recommendations! Published in 2024 at "Journal of Adhesion Science and Technology"

DOI: 10.1080/01694243.2024.2365419

Abstract: Abstract The preliminary experimental results show that the laser cladding technology can produce a well-formed single-layer lead bronze cladding layer with a thickness of 250 μm. The ideal process parameters of the single-layer laser cladding test… read more here.

Keywords: layer; layer cladding; cladding layer; friction ... See more keywords

A study of laser cladding NiCrBSi/Mo composite coatings

Sign Up to like & get
recommendations! Published in 2018 at "Surface Engineering"

DOI: 10.1080/02670844.2016.1259096

Abstract: ABSTRACT Laser cladding Ni-based composite coating was fabricated on the surface of 42CrMo steel using 6 kW fibre laser. By the addition of Mo powder, a well-formed and crack-free laser cladding composite coating was obtained. The… read more here.

Keywords: laser cladding; cladding layer; composite coatings; composite coating ... See more keywords

Carbon Nanotubes-Titanium Diboride/Copper (CNTs-TiB2/Cu) Laser Cladding Layer with Enhanced Tribo-Electrical Property on Wind Turbine Pitch Slip Ring

Sign Up to like & get
recommendations! Published in 2024 at "Tribology Transactions"

DOI: 10.1080/10402004.2024.2428694

Abstract: Abstract Wind turbine pitch slip ring requires excellent tribo-electrical properties, including low friction and wear, high current transmission efficiency, low power loss, and contact resistance. To improve the tribo-electrical property, a carbon nanotubes-titanium diboride/copper (CNTs-TiB2/Cu)… read more here.

Keywords: titanium; slip ring; cladding layer; property ... See more keywords
Photo from wikipedia

Effect of WC content on microstructure, hardness, and wear properties of plasma cladded Fe–Cr–C–WC coating

Sign Up to like & get
recommendations! Published in 2021 at "Materials Research Express"

DOI: 10.1088/2053-1591/ac0b79

Abstract: The Q235 sample was coated with ball-milled Fe–Cr–C–WC powder using plasma cladding technology, and the influence of tungsten carbide (WC) content on the surface microstructure, hardness, and wear properties of the coated steel was evaluated.… read more here.

Keywords: microstructure hardness; cladding layer; hardness wear; microstructure ... See more keywords

Effect of friction stir processing on microstructures and mechanical properties of TIG cladding layer on AA7075

Sign Up to like & get
recommendations! Published in 2021 at "Materials Research Express"

DOI: 10.1088/2053-1591/ac3e95

Abstract: AA7075 is a precipitation strengthened Al-Zn-Mg-Cu alloy which has been widely used. As a common way to repair AA7075 components, tungsten inert gas (TIG) cladding generates coarse grains and defects. In addition, the use of… read more here.

Keywords: friction stir; tig cladding; stir processing; cladding layer ... See more keywords

Microstructure and properties of spiral gradient coating prepared by laser cladding

Sign Up to like & get
recommendations! Published in 2025 at "Materials Research Express"

DOI: 10.1088/2053-1591/adb380

Abstract: In this study, laser additive manufacturing technology is utilized with the objective of controlling the internal stress of the cladding layer to maintain it in a compressive stress state. The cladding material was carefully designed… read more here.

Keywords: layer; cladding layer; microstructure; angle ... See more keywords