Approach to the management of magnesium slag via the production of Portland cement clinker
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Material Cycles and Waste Management"
DOI: 10.1007/s10163-018-0735-4
Abstract: This work aims to develop another approach to the management of magnesium slag (MS) via the production of Portland cement clinker. Thus, 0, 10, 20, 30, 40 and 50% limestone was replaced by MS and… read more here.
Keywords: portland cement; via production; clinker; production portland ... See more keywords
Analysis of Pore Structure Characteristics of Carbonated Low-Clinker Cements
Sign Up to like & getrecommendations! Published in 2018 at "Transport in Porous Media"
DOI: 10.1007/s11242-018-1101-7
Abstract: In this study, changes in transport properties of low-clinker cements on carbonation are investigated. Cement paste and concrete samples were cast using ordinary Portland cement and four types of blended cement. The samples were exposed… read more here.
Keywords: low clinker; carbonation; structure characteristics; clinker ... See more keywords
Valorization of Coniacian-middle Campanian clay minerals of the Meknassy-Mezzouna region (centerwestern Tunisia) in the clinker manufacturing
Sign Up to like & getrecommendations! Published in 2017 at "Arabian Journal of Geosciences"
DOI: 10.1007/s12517-017-3124-8
Abstract: The present work is concerned with the valorization of clay minerals of the Aleg formation (Coniacian-middle Campanian) in the clinker manufacturing. The studied clays (17 samples) were collected from three lithological sections: Jebel Lhassem (LH),… read more here.
Keywords: coniacian middle; clay minerals; clinker manufacturing; clinker ... See more keywords
X-ray fluorescence analysis of Portland cement and clinker for major and trace elements: accuracy and precision
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-017-0087-x
Abstract: Accurate, rapid methods for controlling and determining composition are necessary to aid in classification of cements and for correlation of performance characteristics with composition. X-ray fluorescence (XRF) is used to adjust the raw material proportions… read more here.
Keywords: analysis portland; fluorescence analysis; clinker; ray fluorescence ... See more keywords
Critical research study of quantification methods of mineralogical phases in cementitious materials
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-019-00327-5
Abstract: Cement or clinker phase quantification is considered as an important task for the control of the cement quality and its manufacturing conditions. Indeed, precise clinker phase quantification allows the prediction of cement properties and the… read more here.
Keywords: clinker; method; study; cement ... See more keywords
Mathematical model and numerical solutions for the coupled gas–solid heat transfer process in moving packed beds
Sign Up to like & getrecommendations! Published in 2017 at "Applied Energy"
DOI: 10.1016/j.apenergy.2017.10.011
Abstract: A theoretical study was performed into the coupled gas–solid heat transfer process in a moving cooling packed clinker bed. A mathematical model for the clinker cooling process including effects from clinker movement is proposed. The… read more here.
Keywords: clinker; coupled gas; process; solid heat ... See more keywords
Producing cement clinker assemblages in the system: CaO-SiO2-Al2O3-SO3-CaCl2-MgO
Sign Up to like & getrecommendations! Published in 2021 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2021.106418
Abstract: Abstract The cement industry is carbon-intensive, and the valorisation of industrial side-streams/residuals for use as alternative raw materials can enable the cement industry to reduce its carbon footprint as well as promote resource efficiency. Apart… read more here.
Keywords: cement clinker; clinker; clinker assemblages; cement ... See more keywords
Effect of clinkering conditions on phase evolution and microstructure of Belite Calcium-Sulpho-Aluminate cement clinker
Sign Up to like & getrecommendations! Published in 2021 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2021.106529
Abstract: Abstract This paper studies the effect of clinkering temperature and duration on the production, phase evolution and microstructure of low energy Belite Calcium-Sulpho-Aluminate (BCSA) clinkers. The mineralogy and microstructure of BCSA clinker, produced in the… read more here.
Keywords: clinkering conditions; clinker; phase evolution; evolution microstructure ... See more keywords
Fused magnesia-zirconia co-clinker for fired refractories
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.07.175
Abstract: Abstract In this paper developing a method of obtaining fused magnesia-zirconia co-clinker has been described. The fused co-clinker has been prepared from high-purity raw materials in an arc-resistance furnace. The fused magnesia-zirconia co-clinker was added… read more here.
Keywords: fused magnesia; clinker; magnesia; zirconia clinker ... See more keywords
Belite-calcium sulfoaluminate cement prepared with phosphogypsum: Influence of P2O5 and F on the clinker formation and cement performances
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.01.112
Abstract: Abstract The phosphogypsum (PG) was used for the preparation of belite-calcium sulfoaluminate (BCSA) clinker and as the added gypsum of BCSA cement. The influences of P2O5 and F impurities in PG on clinker formation and… read more here.
Keywords: belite calcium; clinker; formation; bcsa cement ... See more keywords
Numerical investigation of the impact of coating layers on RDF combustion and clinker properties in rotary cement kilns
Sign Up to like & getrecommendations! Published in 2021 at "Fuel"
DOI: 10.1016/j.fuel.2020.118951
Abstract: Abstract The formation of regions of solid coating, where agglomerated clinker material adheres to the refractory lining of the kiln wall, is very common during cement clinker production. While a thin coating layer protects the… read more here.
Keywords: gas phase; clinker; fuel; kiln ... See more keywords