Measurement of Peptide Coating Thickness and Chemical Composition Using XPS.
Sign Up to like & getrecommendations! Published in 2021 at "Methods in molecular biology"
DOI: 10.1007/978-1-0716-0928-6_14
Abstract: X-ray photoelectron spectroscopy is a highly surface-sensitive analytical technique, capable of providing quantitative information on the chemical composition of materials within the top ∼10 nm of their surface. For samples consisting of distinct underlayer and overlayer… read more here.
Keywords: coating thickness; chemical composition; thickness chemical; composition ... See more keywords
The Effect of Metallic Co-Coating Thickness on Ferritic Stainless Steels Intended for Use as Interconnect Material in Intermediate Temperature Solid Oxide Fuel Cells
Sign Up to like & getrecommendations! Published in 2017 at "Oxidation of Metals"
DOI: 10.1007/s11085-017-9782-9
Abstract: The effect of metallic Co-coating thickness on ferritic stainless steels is investigated. This material is suggested to be used as interconnect material in intermediate temperature solid oxide fuel cells. Uncoated, 200-, 600-, 1000-, and 1500-nm… read more here.
Keywords: coating thickness; oxide; effect metallic; effect ... See more keywords
Experimental and Numerical Study of Coating Thickness Using Multi-slot Air Knives
Sign Up to like & getrecommendations! Published in 2019 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-019-01666-1
Abstract: Gas-jet wiping is a widely employed production technology for controlling the final zinc coating thickness on a moving substrate during continuous hot-dip galvanizing. This paper presents an experimental investigation and numerical analysis of a prototype… read more here.
Keywords: slot; coating thickness; geometry; multi slot ... See more keywords
Butt Laser Welding–Brazing of AZ31 Mg to Nickel-Coated Ti-6Al-4V
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04161-5
Abstract: Mg and Ti alloy are hard to be bonded due to their huge discrepancy in physical and metallurgical characteristics. As an intermediate element, Ni is feasible for joining of Mg and Ti. The interfacial microstructure… read more here.
Keywords: interfacial layer; coating thickness; butt laser; layer ... See more keywords
Effect of Coating Thickness on Fatigue Behavior of AISI 1045 Steel with HVOF Thermal Spray and Hard Chrome Electroplating
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01090-x
Abstract: The effects of coating thickness on the fatigue lives of AISI 1045 steel shaft-bending specimens with WC-10%Co-4%Cr high-velocity oxygen fuel (HVOF) coatings and hard chrome electroplated coatings under cyclic loading conditions are investigated. Residual stress… read more here.
Keywords: fatigue; coating thickness; steel; hard chrome ... See more keywords
Effects of Ni coating thickness on the microstructure and mechanical properties of resistance-welded WC-Co/B318 steel joints
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.05.289
Abstract: Abstract WC-Co pellets electroplated with different Ni coating thicknesses and B318 steel were resistance welded for carbide-tipped saw blade applications. The effects of the Ni coating thickness on the welding process, interfacial microstructures, and mechanical… read more here.
Keywords: steel; mechanical properties; coating thickness; b318 steel ... See more keywords
Oxidation kinetics of Cr-coated zirconium alloy: Effect of coating thickness and microstructure
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.108883
Abstract: Abstract Cr coatings with the thickness of 4.5–9.0 μm and dense/columnar microstructure were deposited onto Zr alloy by cooled or hot target magnetron sputtering. Steam oxidation tests were performed under temperature ramp from 500 to 1200 °C… read more here.
Keywords: oxidation; coating thickness; zirconium alloy; oxidation kinetics ... See more keywords
Effect of coating thickness on the stress profile at the epoxy/silicone interface subjected to pull-off loading: A finite element analysis
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2017.08.001
Abstract: Abstract Previous experimental studies of silicone coatings have shown three distinct types of release behavior in the tensile flat punch test, depending on coating thickness. The mechanical response in the punch test is highly dependent… read more here.
Keywords: finite element; coating thickness; stress; punch test ... See more keywords
Influence of Cu coating thickness on interfacial reactions in laser welding-brazing of Mg to Ti
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.06.009
Abstract: Abstract Laser welding-brazing Mg/Cu-coated Ti in lap configuration using various coating thickness was performed with AZ92 Mg based filler. The thermodynamic calculation was conducted to help to analyze microstructure evolution. The brazed joint was divided… read more here.
Keywords: coating thickness; welding brazing; laser welding; interfacial layer ... See more keywords
Experimental study of the effect of coating thickness and substrate roughness on tool wear during turning
Sign Up to like & getrecommendations! Published in 2017 at "Tribology International"
DOI: 10.1016/j.triboint.2016.11.011
Abstract: Abstract The effect of coating thickness and substrate roughness on the tool wear in turning is studied experimentally. TiAlN coating of various thicknesses is applied on tungsten carbide (WC) tool substrate having various surface roughnesses.… read more here.
Keywords: coating thickness; thickness substrate; substrate roughness;
Formation of intermetallics in Pt/Al system as a function of Pt layer thickness
Sign Up to like & getrecommendations! Published in 2017 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2017.05.002
Abstract: Abstract The properties of metals and alloys are of critical importance and bulk alloying is one of the possibilities to enhance their properties. An alternative method to improve their surface characteristics is surface coating. In… read more here.
Keywords: system; coating thickness; formation intermetallics; function ... See more keywords