Functional Coatings on High‐Performance Polymer Fibers for Smart Sensing
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Functional Materials"
DOI: 10.1002/adfm.201910555
Abstract: Above a critical temperature, high‐performance fibers may lose their mechanical properties resulting in catastrophic events of damage when, e.g., used as load‐carrying ropes. Here, a method to functionalize polymer fibers with thermochromic optical coatings that… read more here.
Keywords: high performance; functional coatings; polymer fibers; performance polymer ... See more keywords
Production of Babbitt Coatings by High Velocity Oxygen Fuel (HVOF) Spraying
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0615-9
Abstract: This work presents HVOF as an alternative means to produce dense Babbitt coatings by thermal spray. A radial injection setup and low fuel flow rates were used to minimize heat transfer to the low melting… read more here.
Keywords: babbitt coatings; production babbitt; babbitt; velocity ... See more keywords
Steam oxidation of aluminide coatings under high pressure and for long exposures
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.08.053
Abstract: B2-FeAl-based aluminide coatings were elaborated on P92 ferritic-martensitic steels by slurry. Under atmospheric pressure of steal and 650°C, a thin protective α-Al 2 O 3 oxide layer formed and was maintained until 5000 h. With… read more here.
Keywords: aluminide coatings; steam oxidation; high pressure; oxidation aluminide ... See more keywords
Superhydrophobic coatings with high repellency to daily consumed liquid foods based on food grade waxes.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2018.01.034
Abstract: The applications of superhydrophobic coatings in daily life are receiving increasing attention. Here, we report a general approach for preparing superhydrophobic coatings with high repellency to daily consumed liquid foods based on food grade waxes.… read more here.
Keywords: wax; high repellency; superhydrophobic coatings; liquid foods ... See more keywords
Cool coatings with high near infrared transmittance for coil coated aluminium
Sign Up to like & getrecommendations! Published in 2019 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2019.03.021
Abstract: Abstract The temperature of a surface that is exposed to sunlight is influenced by the solar reflectance and the infrared emittance of the surface. A coating that reduces the surface temperature is often referred to… read more here.
Keywords: cool coatings; solar reflectance; near infrared; reflectance ... See more keywords
Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill
Sign Up to like & getrecommendations! Published in 2018 at "Wear"
DOI: 10.1016/j.wear.2018.05.016
Abstract: Abstract In this paper, the erosion behavior of three types of protective thermally-sprayed coatings and non-coated substrate steel was investigated under semi-industrial test conditions using a laboratory high-speed pin mill DESI-11. The grinding in the… read more here.
Keywords: grinding rotors; sprayed coatings; thermally sprayed; coatings high ... See more keywords
Si-O-C amorphous coatings for high temperature protection of In0.4Co4Sb12 skutterudite for thermoelectric applications
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Physics"
DOI: 10.1063/1.5097284
Abstract: High temperature corrosion of thermoelectric materials is one of the most important issues linked with their application for power generation, especially in terrestrial conditions. The high chemical affinity of elements composing thermoelectric material to oxygen… read more here.
Keywords: temperature; amorphous coatings; 4co4sb12 skutterudite; high temperature ... See more keywords
Effects of Boron Nitride Coatings at High Temperatures and Electromagnetic Wave Absorption Properties of Carbon Fiber-Based Magnetic Materials
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Nanomaterials"
DOI: 10.1155/2020/3672517
Abstract: An electromagnetic (EM) wave-absorbing material with a three-layer structure is prepared by depositing magnetic particles and a high-temperature resistant coating on the surface of the carbon fiber... read more here.
Keywords: nitride coatings; carbon fiber; effects boron; boron nitride ... See more keywords