Optimization of Cu and Zn co-doped PEO titania coatings produced in a novel borate-based electrolyte for biomedical applications
Sign Up to like & getrecommendations! Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2021.129627
Abstract: Abstract Plasma Electrolytic Oxidation is gaining an increasing interest as surface modification technique for the fine tuning of both the chemical composition and the morphology of the surface of medical devices. Here, we propose a… read more here.
Keywords: coatings produced; peo titania; doped peo; titania coatings ... See more keywords
The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anticorrosive properties of alumina films deposited on steel substrate – Part I: Single conversion coatings
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.05.040
Abstract: Abstract Boehmite and silica conversion coatings were produced by sol-gel dip coating and heat-treated at different temperatures to improve the anticorrosive performance of alumina film deposited on AISI 1020 carbon steel substrate. SEM and XRD… read more here.
Keywords: sol gel; heat; conversion; coatings produced ... See more keywords
Biobased, Nonisocyanate, 2K Polyurethane Coatings Produced from Polycarbamate and Dialdehyde Cross-linking
Sign Up to like & getrecommendations! Published in 2019 at "ACS Sustainable Chemistry & Engineering"
DOI: 10.1021/acssuschemeng.9b04713
Abstract: Bioderived polycarbamates were cross-linked with petrochemically derived and biomass-derived dialdehydes to form nonisocyanate polyurethanes (NIPUs). The bioderived polycarbamates were synthesized from a soybean oil-derived alkyd polyol and epoxidized sucrose soyate polyol via transcarbamoylation. The polycarbamates… read more here.
Keywords: coatings produced; produced polycarbamate; nonisocyanate polyurethane; polyurethane coatings ... See more keywords
The Bioactivity and Photocatalytic Properties of Titania Nanotube Coatings Produced with the Use of the Low-Potential Anodization of Ti6Al4V Alloy Surface
Sign Up to like & getrecommendations! Published in 2017 at "Nanomaterials"
DOI: 10.3390/nano7080197
Abstract: Titania nanotube (TNT) coatings were produced using low-potential anodic oxidation of Ti6Al4V substrates in the potential range 3–20 V. They were analysed by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron… read more here.
Keywords: coatings produced; bioactivity; ti6al4v alloy; titania nanotube ... See more keywords