Electrochemical Properties of Commercially Pure Ti with TiB/TiB2 Coatings in Hanks’ Balanced Salt Solution
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-03930-6
Abstract: In this study, in order to evaluate the electrochemical performance of different titanium boride coatings created on the commercially pure titanium (CP-Ti), distinct electrochemical assays in Hanks’ balanced salt solution at 37 °C were conducted using… read more here.
Keywords: salt solution; balanced salt; titanium; commercially pure ... See more keywords
Corrosion Resistance of Sintered Commercially Pure Titanium in Inorganic Acids after Oxidation and Nitriding
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03793-1
Abstract: AbstractThe corrosion resistance of oxidized and nitrided commercially pure titanium obtained by sintering of powders of titanium, titanium hydride and their mixtures was evaluated in 20% aqueous solution of hydrochloric acid and 40% aqueous solution… read more here.
Keywords: titanium obtained; pure titanium; corrosion; titanium ... See more keywords
Development of Recrystallization Texture in Commercially Pure Titanium: Experiments and Simulation
Sign Up to like & getrecommendations! Published in 2020 at "JOM"
DOI: 10.1007/s11837-020-04447-3
Abstract: The recrystallization behaviour of cold-rolled (CR) commercially pure (cp)-titanium was investigated by experiments and simulations. The recrystallization texture in cp-titanium depends upon the deformation texture. The main texture components of the lower deformed (50% CR)… read more here.
Keywords: recrystallization; pure titanium; commercially pure; recrystallization texture ... See more keywords
Experimental evaluation of critical resolved shear stress for the first-order pyramidal c + a slip in commercially pure Ti by micropillar compression method
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2020.06.043
Abstract: Abstract The plastic deformation behavior of commercially pure Ti single crystals has been investigated by uniaxial micropillar compression tests as a function of crystal orientation and specimen size at room temperature. {10 1 ¯ 1}… read more here.
Keywords: slip; first order; pyramidal slip; commercially pure ... See more keywords
Hydrogen-affected fatigue crack propagation at various loading frequencies and gaseous hydrogen pressures in commercially pure iron
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2018.12.009
Abstract: Abstract Hydrogen-Affected Fatigue Crack Growth (HAFCG) in commercially pure iron has been characterized in terms of hydrogen gas pressure, loading frequency and stress intensity factor range ΔK. A higher hydrogen gas pressure decreases the critical… read more here.
Keywords: fatigue crack; affected fatigue; hydrogen; hydrogen affected ... See more keywords
Modelling the effects of twinning and dislocation induced strengthening in orthogonal micro and macro cutting of commercially pure titanium
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2020.106045
Abstract: Abstract This paper presents a physics based Finite Element (FE) model to explore the microstructural phenomena occurring during severe plastic deformation processes, taking into account the influence of deformation-induced twinning, dislocation accumulation, and grain size… read more here.
Keywords: dislocation; twinning dislocation; pure titanium; model ... See more keywords
On the modelling of plastic anisotropy, asymmetry and directional hardening of commercially pure titanium: A planar Fourier series based approach
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2017.02.010
Abstract: Abstract Uni-axial tension and compression tests were conducted on commercially pure titanium sheet. Strong anisotropy and tension-compression asymmetry was observed. The work hardening behaviour was found to be strongly dependent on the direction and sign… read more here.
Keywords: pure titanium; asymmetry; commercially pure; fourier series ... See more keywords
Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2018.01.023
Abstract: Abstract Zirconium and its alloys are mainly applied in the nuclear industries due to the small absorption cross section of thermal neutron, good mechanical performances, and favorable corrosion resistance. Fiber laser bead-on-plate welding of 1.12-mm… read more here.
Keywords: corrosion; fiber laser; commercially pure; pure zirconium ... See more keywords
A flexible modelling approach for capturing plastic anisotropy and strength differential effects exhibited by commercially pure titanium
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Solids and Structures"
DOI: 10.1016/j.ijsolstr.2017.05.027
Abstract: Abstract Commercially pure titanium exhibits strong anisotropy, strength differential as well as texture evolution, which make the development of predictive simulation models a challenging task. A new modeling approach is proposed based on the homogeneous… read more here.
Keywords: strength differential; commercially pure; anisotropy strength; pure titanium ... See more keywords
Room-temperature plastic behavior and formability of a commercially pure titanium: Mechanical characterization, modeling, and validation
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Solids and Structures"
DOI: 10.1016/j.ijsolstr.2021.111121
Abstract: Abstract Data on the room temperature behavior of titanium is limited. To assess the anisotropy of the plastic behavior of a commercially pure grade 2 hcp–titanium T40 for different strain paths, in this study both… read more here.
Keywords: compression; commercially pure; plastic behavior; tension ... See more keywords
Abnormal grain growth in commercially pure titanium during additive manufacturing with electron beam melting
Sign Up to like & getrecommendations! Published in 2019 at "Materialia"
DOI: 10.1016/j.mtla.2019.100281
Abstract: Abstract The microstructural evolution of commercially pure titanium (CP-Ti) was investigated during additive manufacturing (AM) with electron beam melting (EBM). Abnormal grain growth (AGG) was observed throughout all but the top of the specimen, with… read more here.
Keywords: growth; pure titanium; commercially pure; additive manufacturing ... See more keywords