Developing conductive immiscible polystyrene/polypropylene blends with a percolated conducting polyaniline/polyamide filler by tuning its specific interactions with the styrene‐based triblock compatibilizer grafted with maleic anhydride
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.48433
Abstract: An approach to induce conductivity in immiscible polystyrene/polypropylene (PS/PP) blends is described using a percolated conducting polyaniline/polyamide (PANI/PA) filler combined with a polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene‐graft‐maleic anhydride compatibilizer. The approach is based on the ability of the compatibilizer… read more here.
Keywords: polystyrene polypropylene; filler; compatibilizer; polypropylene blends ... See more keywords
Enhanced mechanical and thermal properties of polypropylene/cellulose fibers composites with modified tannic as a compatibilizer
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24165
Abstract: A novel compatibilizer tannic grafted poly(12-hydroxy stearate) (TA-g-PHS) was synthesized using tannic and 12-hydroxystearic acid as raw materials through the esterification reaction. The compatibilizer was used to improve the compatibility between polypropylene (PP) and microcrystalline… read more here.
Keywords: composites modified; mcf; enhanced mechanical; cellulose fibers ... See more keywords
Thermo-oxidative stability and remarkable improvement in mechanical performance for styrenic-based elastomer composites contributed from silane-treated pineapple leaf fiber and compatibilizer
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Plastics Technology"
DOI: 10.1007/s12588-017-9183-6
Abstract: Composites of styrenic based thermoplastic elastomer reinforced with pineapple leaf fiber were prepared by melt mixing on a two-roll mill, sheeted out with preferred alignment of the fiber and molded in the form of composite… read more here.
Keywords: oxidative stability; styrenic based; fiber; compatibilizer ... See more keywords
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107028
Abstract: Abstract Different ratios of poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared by melt blending in the presence of a multifunctional epoxy oligomers as reactive compatibilizer. During reactive blending, the compatibilizer could react with PLA and… read more here.
Keywords: pla pbat; high toughness; pbat blends; pbat ... See more keywords
Injection molded biocomposites from polypropylene and lignin: Effect of compatibilizers on interfacial adhesion and performance
Sign Up to like & getrecommendations! Published in 2019 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2019.02.026
Abstract: Abstract This study compares the effect of two compatibilizers on polypropylene (PP)-lignin composites. Two commercial compatibilizers: maleated polypropylene (MAPP) and ethylene butylacrylate glycidylmethacrylate (EBGMA), as well combinations of them, were used to enhance the interfacial… read more here.
Keywords: adhesion; injection; polypropylene lignin; interfacial adhesion ... See more keywords
Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability
Sign Up to like & getrecommendations! Published in 2020 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2019.112061
Abstract: Abstract Poly(butylene adipate-Co-terephthalate) (PBAT) is a completely biodegradable aliphatic-aromatic copolyester with competitive mechanical properties in comparison to commodity plastic, although it is about three times more expensive than low-density polyethylene (LDPE). The blending of PBAT… read more here.
Keywords: pbat; plasticized starch; mechanical properties; packaging ... See more keywords
Novel sustainable materials from waste plastics: compatibilized blend from discarded bale wrap and plastic bottles
Sign Up to like & getrecommendations! Published in 2021 at "RSC Advances"
DOI: 10.1039/d1ra00254f
Abstract: This work studies a novel sustainable polymeric material made from a reactive blend of two agri-food waste plastics, with the newmaterial showing strong promise for value-added industrial uses. Discarded bale wrap destined for landfill that… read more here.
Keywords: waste plastics; blend; compatibilizer; novel sustainable ... See more keywords
Influence of modified mesoporous silica SBA-15 and compatibilizer on the properties and structure of ethylene-vinyl acetate copolymer-based nanocomposites
Sign Up to like & getrecommendations! Published in 2020 at "Polymer-Plastics Technology and Materials"
DOI: 10.1080/25740881.2020.1784216
Abstract: ABSTRACT Three series of poly(ethylene-co-vinyl acetate)/mesoporous silica type SBA-15 (EVA/SBA-15) nanocomposites, containing 1, 2, 3, and 4 wt% SBA-15 nanoparticles were prepared by melt blending in internal mixer. The mesoporous silica SBA-15 was synthesized by… read more here.
Keywords: sba; vinyl acetate; ethylene vinyl; mesoporous silica ... See more keywords
Polypropylene Carbon Nanotubes Nanocomposites: Combined Influence of Block Copolymer Compatibilizer and Melt Annealing on Electrical Properties
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Nanomaterials"
DOI: 10.1155/2017/9075878
Abstract: We study the influence of melt annealing and the presence of a block copolymer compatibilizer on the electrical properties of polypropylene carbon nanotubes (CNT) nanocomposites from the DC limit to microwave frequencies and link it… read more here.
Keywords: block copolymer; copolymer compatibilizer; melt annealing; polypropylene carbon ... See more keywords
Influence of ABS Type and Compatibilizer on the Thermal and Mechanical Properties of PC/ABS Blends
Sign Up to like & getrecommendations! Published in 2020 at "International Polymer Processing"
DOI: 10.3139/217.3858
Abstract: Abstract The present work aimed to study the influence of ABS type and compatibilizer on the thermal and mechanical properties of PC/ABS blends. For that, blends of PC with two types of ABS, with different… read more here.
Keywords: influence abs; type compatibilizer; abs blends; properties abs ... See more keywords
Effect of Diisocyanates as Compatibilizer on the Properties of BF/PBAT Composites by In Situ Reactive Compatibilization, Crosslinking and Chain Extension
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13030806
Abstract: Due to the hydrophobic nature of poly (butylene terephthalate) (PBAT), and the hydrophilic nature of bamboo flour (BF), a BF/PBAT (50/50) blend shows low mechanical properties, and especially shows poor impact strength. In order to… read more here.
Keywords: mdi; pbat composites; pbat; group ... See more keywords