Fabrication and Characterization of Ni-P-CoNiCrAlY Composite Coatings
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2537-6
Abstract: Abstract In this study, Ni-P-CoNiCrAlY composite coatings were deposited on 310 stainless steel. The surface morphology and cross-sectional observations were carried out using scanning electron microscopy and optical microscopy. The high-temperature corrosion of all coatings… read more here.
Keywords: conicraly composite; characterization conicraly; microscopy; fabrication characterization ... See more keywords
Corrosion Protection of Phenolic-Epoxy/Tetraglycidyl Metaxylediamine Composite Coatings in a Temperature-Controlled Borax Environment
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2980-4
Abstract: The failure behavior for two kinds of phenolic-epoxy/tetraglycidyl metaxylediamine composite coatings in 60 °C borax aqueous solution was evaluated using electrochemical methods (EIS) combined with scanning electron microscopy, confocal laser scanning microscope, water immersion test, and… read more here.
Keywords: tetraglycidyl metaxylediamine; metaxylediamine composite; composite coatings; phenolic epoxy ... See more keywords
Manufacturing of Composite Coatings by Atmospheric Plasma Spraying Using Different Feed-Stock Materials as YSZ and MoSi2
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0537-6
Abstract: AbstractYttria-stabilized zirconia (YSZ) is the state-of-the-art material for the top coat of thermal barrier coatings. To increase the efficiency and lifetime of gas turbines, the integration of MoSi2 as a healing material was proposed. A… read more here.
Keywords: mosi2; ysz mosi2; composite coatings; coatings atmospheric ... See more keywords
Effect of Powder Preparation on the Microstructure and Wear of Plasma-Sprayed NiAl/CrB2 Composite Coatings
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00861-5
Abstract: The properties of plasma-sprayed composite coatings depend to a large extent on the homogenization of the powders used for their deposition. In order to investigate this relation, mixtures of NiAl and CrB2 (15 and 30… read more here.
Keywords: composite coatings; effect powder; nial crb2; plasma sprayed ... See more keywords
Microstructure and Properties of Al2O3–ZrO2–Y2O3 Composite Coatings Prepared by Plasma Spraying
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01043-4
Abstract: Al2O3–ZrO2–Y2O3 composite coatings were prepared by plasma spraying Al2O3–ZrO2 composite powder with varying amounts of Y2O3. The effects of Y2O3 on the microstructure and properties of the plasma-sprayed Al2O3–ZrO2 composite coatings were investigated, and the… read more here.
Keywords: al2o3 zro2; composite coatings; zro2 y2o3; microstructure ... See more keywords
Intermetallic Phase Evolution of Cold-Sprayed Ni-Ti Composite Coatings: Influence of As-Sprayed Chemical Composition
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01112-8
Abstract: Owing to low-temperature deposition conditions and high deposition rate, cold spray offers unique advantages in manufacturing a wide variety of metallic and composite coatings including metal matrix composites produced from physically blended powders. One of… read more here.
Keywords: phase; spray; phase evolution; composite coatings ... See more keywords
Morphology, Texture and Corrosion Behavior of Nanocrystalline Copper–Graphene Composite Coatings
Sign Up to like & getrecommendations! Published in 2017 at "JOM"
DOI: 10.1007/s11837-017-2364-0
Abstract: This article discusses morphology, texture and corrosion behavior of electrodeposited Cu–graphene composite coatings on mild steel. This study demonstrates that a metal–graphene composite coating, in which graphene is incorporated into a suitable metal matrix, is… read more here.
Keywords: morphology texture; composite coatings; graphene; corrosion ... See more keywords
Effect of TiBCN Content on Microstructure and Properties of Laser Cladding Ti/TiBCN Composite Coatings
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00287-2
Abstract: The Ti/TiBCN composite coatings were fabricated on the substrate of Ti6Al4V alloy by laser cladding. The effects of TiBCN content on the microstructre, microhardness, corrosion resistance and tribological properties of the composite coatings were studied.… read more here.
Keywords: tibcn composite; composite coatings; effect tibcn; laser cladding ... See more keywords
Preparation and tribological behavior of electrodeposited Ni–W–GO composite coatings
Sign Up to like & getrecommendations! Published in 2018 at "Rare Metals"
DOI: 10.1007/s12598-018-1173-0
Abstract: Ni–W–GO composite coatings were successfully plated on 45# steel substrate by co-electrodeposition technique in a Ni–W electrolyte solution, with different contents of graphene oxide (GO) nanoparticles in suspension. The structure, phase composition and surface morphology… read more here.
Keywords: preparation tribological; tribological behavior; composite coatings; behavior electrodeposited ... See more keywords
The Effect of Nb2O5-Ni Coatings on the Microstructural and Corrosion Behavior on Carbon Steel for Marine Application
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00440-0
Abstract: In this study, we developed Nb2O5-Ni composite coatings on carbon steel by DC sputtering technique. The effect of Nb2O5 particulate on the Ni coating properties was investigated. The weight percents of Nb2O5 in Ni coating… read more here.
Keywords: composite coatings; corrosion; effect nb2o5; carbon steel ... See more keywords
The fabrication of Fe-W-mullite-based composite coatings inside a steel pipe by centrifugal-SHS process
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-017-0043-9
Abstract: Fe-W-mullite-based composite coatings were prepared on the inner-surface steel pipe from two reactions of Fe(Mn)WO4-Fe2O3-Al-Si and Fe(Mn)WO4-Fe2O3-B2O3-Al-Si mixture powder by centrifugal-SHS process. Standard Gibbs energy minimization method was used to compute the adiabatic temperature (Tad)… read more here.
Keywords: centrifugal shs; mullite based; based composite; composite coatings ... See more keywords