Prediction of Interfacial Debonding in Fiber‐Reinforced Composite Laminates
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24943
Abstract: An analytical method is established to estimate the load level when interfacial debonding occurs between fibers and matrix of a composite under an arbitrary load. Only the transverse tensile strength and the components' properties of… read more here.
Keywords: fiber reinforced; debonding fiber; composite laminates; reinforced composite ... See more keywords
High‐velocity impact response and damage behavior of bio‐inspired helicoidal composite laminates: Experimental and numerical investigation
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29546
Abstract: Bio‐inspired helicoidal composite laminates have been found to have better impact resistance and energy absorption than conventional laminates. To study the impact responses and damage behaviors of bio‐inspired helicoidal composite laminates under high‐velocity impact, the… read more here.
Keywords: composite laminates; bio inspired; damage; inspired helicoidal ... See more keywords
Eco‐innovative processing of poly (butylene succinate)‐Kenaf composite laminates: Solar energy integration and material characterization
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29952
Abstract: The high processing costs and environmental concerns of conventional compression molding necessitate alternative approaches. Therefore, the present study investigates an eco‐innovative approach for producing sustainable poly (butylene succinate)‐kenaf composite laminates using a novel spring‐forced compression… read more here.
Keywords: pbs; composite laminates; poly butylene; eco innovative ... See more keywords
Investigation of Strain History in Autoclave Process for Composite Laminates Subjected to Tool–Part Interaction Using FBG Sensors
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70381
Abstract: During the autoclave process, the curing deformation of composite components is recognized as a key factor affecting the forming quality. In this paper, an online monitoring system for cure‐induced strain in the full curing process… read more here.
Keywords: autoclave process; composite laminates; process; history ... See more keywords
Effect of Two Coatings on Impact Response and Compression After Impact Strength of Composite Laminates
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70610
Abstract: Composite laminates are particularly vulnerable to low‐velocity impacts, which induce internal damage and lead to significant strength reduction. This study presented the first investigation into the application of Polyisocyanate Oxazolidone (POZD) coatings on composite to… read more here.
Keywords: composite laminates; cai strength; impact; compression impact ... See more keywords
Non-probabilistic interval model-based system reliability assessment for composite laminates
Sign Up to like & getrecommendations! Published in 2019 at "Computational Mechanics"
DOI: 10.1007/s00466-019-01683-6
Abstract: Composite materials have been widely applied to engineering fields by virtue of its superior mechanical properties. Therefore, the problem of composite laminates safety assessment has also been discussed. This paper develops the non-probabilistic interval model-based… read more here.
Keywords: interval model; non probabilistic; composite laminates; model ... See more keywords
Oriented growth of BaTiO3 along the basalt fibers and their dielectric properties in poly(ether sulfone)-based composite laminates
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9702-z
Abstract: To develop high performance of polymer-based composites, the dispersion state and interfacial interaction of nano-fillers are two key issues to be considered. Herein, we report the surface decoration of basalt fibers (BF) with nano-sized barium… read more here.
Keywords: based composite; basalt fibers; composite laminates; ether sulfone ... See more keywords
Stability and bifurcations in oscillations of composite laminates with curvilinear fibres under a supersonic airflow
Sign Up to like & getrecommendations! Published in 2020 at "Nonlinear Dynamics"
DOI: 10.1007/s11071-020-05838-6
Abstract: Nonlinear flutter of variable stiffness composite plates—using a reduced-order model benefiting from a large-enough number of modes or degrees of freedom—is the subject of this research. Dynamic of such plates is enriched by different scenarios… read more here.
Keywords: oscillations composite; stability bifurcations; laminates curvilinear; bifurcations oscillations ... See more keywords
Tensile After Impact Test of Scarf-Repaired Composite Laminates
Sign Up to like & getrecommendations! Published in 2019 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-019-03857-z
Abstract: AbstractThis paper presents the influence of impact location at the bond line of internal repaired composite. Regarding this, the composite laminates were manufactured via vacuum assist resin infusion method and scarfed adhesive bonded repair technique… read more here.
Keywords: repaired composite; composite laminates; impact; test ... See more keywords
Mechanistic cutting force modelling for micro-drilling of CFRP composite laminates
Sign Up to like & getrecommendations! Published in 2017 at "Cirp Journal of Manufacturing Science and Technology"
DOI: 10.1016/j.cirpj.2016.07.002
Abstract: Abstract This article presents a mechanistic model to predict thrust force and torque in micro-drilling of carbon fibre-reinforced plastic (CFRP) composite laminates. Tool edge radius effects are considered in this model to predict cutting forces… read more here.
Keywords: cfrp composite; epoxy resin; micro drilling; force ... See more keywords
Effect of Z-pinning on the impact resistance of composite laminates with different layups
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2018.08.013
Abstract: Abstract The paper presents the results of an experimental investigation into the effect of Z-pinning on the impact resistance of composite laminates with different multi-directional layups. Unpinned and pinned [02/902]s, [02/±45]s and [0/±45/90]s carbon/epoxy samples… read more here.
Keywords: resistance composite; resistance; effect pinning; impact resistance ... See more keywords