Electromagnetic pulse-induced acoustic testing and the pulsed guided wave propagation in composite/metal adhesive bonding specimens
Sign Up to like & getrecommendations! Published in 2021 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2020.108499
Abstract: Abstract Materials composed of metals and plastic composites joined through adhesive bonding are being increasingly used. However, debonding of such materials may occur during manufacture or use. Non-destructive testing of adhesive bonding structures is required… read more here.
Keywords: composite metal; adhesive bonding; electromagnetic pulse; pulse induced ... See more keywords
Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2016.12.058
Abstract: An experimental study has been carried out to assess the adhesion quality of composite-to-metal bonded joints under salt spray ageing conditions. The tests were performed according to the ASTM standard of floating roller peel tests… read more here.
Keywords: bonded joints; salt spray; composite metal; adhesion ... See more keywords
On the influence of glass fiber mat on the mixed-mode fracture of composite-to-metal bonded joints
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.113109
Abstract: Abstract In this work, the influence of a layer of glass fiber mat (GFM) inserted in a bi-material bonded joint interface is investigated as a toughening mechanism to improve the fracture performance of bonded structures.… read more here.
Keywords: fracture; composite metal; metal; fiber mat ... See more keywords
Composite metal foam/PCM energy store design for dwelling space air heating
Sign Up to like & getrecommendations! Published in 2019 at "Energy Conversion and Management"
DOI: 10.1016/j.enconman.2019.112151
Abstract: Abstract The objective of this numerical study is to develop a latent heat storage (LHS) air heater in both charging and discharging processes to find the geometrical and operating conditions for dwelling space heating. The… read more here.
Keywords: output temperature; composite metal; air; dwelling space ... See more keywords
Effect of salt spray ageing on the fracture of composite-to-metal bonded joints
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2021.102885
Abstract: Abstract This work investigates the effect of long-term environmental exposure on the performance of composite-to-metal bonded joints. Specimens are manufactured using a carbon-fiber reinforced polymer (CFRP) co-bonded to a steel member with epoxy adhesive and… read more here.
Keywords: bonded joints; metal bonded; fracture; composite metal ... See more keywords
Effect of geometry modification on the thermal response of composite metal foam/phase change material for thermal energy storage
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2020.120652
Abstract: Abstract In this study, seven vertical shell-tube latent heat storage (LHS) systems are built to explore the effect of geometry on the melting and solidification behavior of phase change material (PCM). The performances of these… read more here.
Keywords: metal foam; system; composite metal; geometry ... See more keywords
A dendrite-free composite Li metal anode enabled by lithiophilic Co, N codoped porous carbon nanofibers
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2020.229188
Abstract: Abstract Lithium (Li) metal is the most promising anode material for the next-generation high-energy density battery due to its high specific capacity and low redox potential. However, its practical applications is challenged by uncontrolled Li… read more here.
Keywords: composite metal; metal; carbon nanofibers; porous carbon ... See more keywords
Off-line programming of a flexible and adaptive production line for composite-metal multi-material manufacturing based on OPC-UA communication
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.10.073
Abstract: Abstract Transport sector is working on the development of innovative lightweight structural solutions in order to improve fuel consumption replacing single-material components by layered composite-metal multi-material, which are manufactured predominantly in manual or only partly… read more here.
Keywords: line; composite metal; manufacturing; material ... See more keywords
Research Progress of a Composite Metal Oxide Catalyst for VOC Degradation.
Sign Up to like & getrecommendations! Published in 2022 at "Environmental science & technology"
DOI: 10.1021/acs.est.2c02772
Abstract: Volatile organic compounds (VOCs) are atmospheric pollutants that have been of concern for researchers in recent years because they are toxic, difficult to remove, and widely sourced and easily cause damage to the environment and… read more here.
Keywords: metal oxide; catalyst; composite metal; oxide catalyst ... See more keywords
Superhydrophobic Ag–Cu Composite Metal Film as Surface-Enhanced Raman Scattering Substrate
Sign Up to like & getrecommendations! Published in 2018 at "NANO"
DOI: 10.1142/s1793292018500832
Abstract: In this paper, a superhydrophobic Ag–Cu composite metal film was fabricated as surface-enhanced Raman scattering substrate. Ag–Cu composite metal film was prepared from galvanic displacement on com... read more here.
Keywords: composite metal; metal film; surface enhanced; superhydrophobic composite ... See more keywords
Forming and layering method optimization of prestressed joint of composite-metal drive shaft
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Reinforced Plastics and Composites"
DOI: 10.1177/07316844211065062
Abstract: Prestressed fit is a new type of composite and metal connection. Compared with the traditional connection, it has the advantages of maintaining fiber continuity, high controllability, and high stability. According to the analytical model, the… read more here.
Keywords: stress; composite metal; prestressed joint; joint composite ... See more keywords