Residual stresses and mechanical properties of Si3N4/SiC multilayered composites with different SiC layers
Sign Up to like & getrecommendations! Published in 2017 at "Boletin De La Sociedad Espanola De Ceramica Y Vidrio"
DOI: 10.1016/j.bsecv.2016.11.003
Abstract: Abstract The effect of residual stresses on the strength, toughness and work of fracture of Si 3 N 4 /SiC multilayered composites with different SiC layers has been investigated. It may be an effective way… read more here.
Keywords: different sic; sic multilayered; multilayered composites; residual stresses ... See more keywords
Phase transformation in spark plasma sintered ZrB2–V–C composites at different temperatures
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.12.202
Abstract: Abstract Spark plasma sintering was employed for the fabrication of ZrB2–V–C composites at different consolidation temperatures (1800, 1900 and 2000 °C) using an external pressure of 40 MPa for 7 min under vacuum atmosphere. Vanadium powders and graphite… read more here.
Keywords: composites different; zrb2 composites; phase transformation; spark plasma ... See more keywords
Damage initiation in unidirectional fiber composites with different degrees of nonuniform fiber distribution
Sign Up to like & getrecommendations! Published in 2018 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2017.11.017
Abstract: This paper reports a study of the initiation of the first failure event in unidirectional composites subjected to transverse tension. Two energy based point failure criteria – critical dilatational ... read more here.
Keywords: damage initiation; initiation; composites different; fiber composites ... See more keywords
An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.111938
Abstract: Abstract The mechanical properties of 3D needled composites are greatly associated with the complex needle-punched process. Needle-punched process is described quantitatively to relate with the internal features of 3D needled composites combining with experiment observations.… read more here.
Keywords: punched processes; needle punched; method; needled composites ... See more keywords
On the theory of constitutive equations for composites with different resistance in compression and tension
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.113921
Abstract: Abstract The paper proposes a new approach to the construction of nonlinear constitutive equations for the description of elastic deformation of fibrous composites with different resistance in compression and tension. The framework of the approach… read more here.
Keywords: composites different; compression; constitutive equations; different resistance ... See more keywords
Thermal diffusivity of ZTA composites with different YSZ quantity
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.11.019
Abstract: Abstract In the present study, ZTA composites containing 0–10 vol% of 5mol% YSZ (in the range 0–10 vol%) were prepared by sol-gel technique followed by powder mixing and sintering up to 1650 °C for 1 h. Microstructure of the… read more here.
Keywords: diffusivity zta; composites different; thermal diffusivity; zta composites ... See more keywords
Electrical properties of semi-conductive composites with different Li0.5La0.5TiO3 content
Sign Up to like & getrecommendations! Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.128664
Abstract: Abstract In this study, semi-conductive composites with different contents of the perovskite type ionic conductor Li0.5La0.5TiO3 (LLTO) were synthesized to weaken the positive temperature coefficient (PTC) effect of the semi-conductive composites and inhibit the injection… read more here.
Keywords: 5la0 5tio3; li0 5la0; composites different; ptc effect ... See more keywords
Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Composite Materials"
DOI: 10.1177/00219983221116672
Abstract: Thermodynamic responses of three-dimensional (3D) braided composites with different braiding angles (25°/35°/45°) under high strain rate punch shear loading were studied through experiments and simulations. Plasticity criterion, shear criterion and interface damage criterion are introduced… read more here.
Keywords: composites different; strain rate; punch shear; strain ... See more keywords
Investigation of mechanical properties for 2.5D woven composites with different weft-layer-numbers by a triple-cell model system
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Industrial Textiles"
DOI: 10.1177/1528083720958046
Abstract: As a new type of textile composites with broad application prospects, it is essential to study the prediction method of the mechanical properties of 2.5 D woven composites (2.5DWC). Currently, the ... read more here.
Keywords: properties woven; mechanical properties; composites different; investigation mechanical ... See more keywords
Wood Flour’s Effect on the Properties of Geopolymer-based Composites at Different Curing Times
Sign Up to like & getrecommendations! Published in 2018 at "Bioresources"
DOI: 10.15376/biores.13.2.2499-2514
Abstract: Fly-ash (FA) /wood-flour (WF) geopolymer composites (FWGCs) were prepared to investigate the influence of WF on the properties of FA-based geopolymer composites at different curing times. The crystallization, surface morphology, geopolymerization, interface analysis, and mechanical… read more here.
Keywords: flour effect; composites different; mechanical properties; curing times ... See more keywords
The Strength and Delamination of Graphene/Cu Composites with Different Cu Thicknesses
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14112983
Abstract: This study analyzed the mechanical and fracture behavior of graphene/copper (Cu) composites with different Cu thicknesses by using molecular dynamics (MD) and representative volume element (RVE) analysis. Three graphene/Cu composite analytical models were classified as… read more here.
Keywords: graphene composites; graphene; strength delamination; different thicknesses ... See more keywords