Morphology, Resistivity, and PTC behavior of EVOH/CB composites prepared by solvent-casting saponification and precipitation saponification
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23714
Abstract: Poly(ethylene-co-vinyl alcohol)/carbon black (EVOH/CB) composites were prepared by a solvent-casting saponification (-D) and precipitation saponification (-P) methods with a poly(ethylene-co-vinyl acetate)/CB (EVA/CB) toluene suspension. The effects of the CB content and saponification time on the… read more here.
Keywords: resistivity; prepared solvent; saponification; solvent casting ... See more keywords
Flame retardancy and thermal degradation mechanism of calcium alginate/CaCO3 composites prepared via in situ method
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-017-6767-5
Abstract: The calcium alginate/CaCO3 composites were prepared via in situ method, and their flame retardancy and thermal degradation mechanism were investigated. The composites as-prepared were analyzed by the scanning electron microscopy (SEM), Fourier transform infrared spectroscopy,… read more here.
Keywords: calcium; composites prepared; calcium alginate; flame retardancy ... See more keywords
Photocatalytic properties of TiO2@polymer and TiO2@carbon aerogel composites prepared by atomic layer deposition
Sign Up to like & getrecommendations! Published in 2019 at "Carbon"
DOI: 10.1016/j.carbon.2019.02.076
Abstract: Abstract Monolithic structured TiO2/aerogel composites were prepared from resorcinol-formaldehyde polymer aerogel (RFA) and its carbon aerogel (RFCA) derivative. A resorcinol-formaldehyde hydrogel was synthesized in a sol-gel reaction and transformed into polymer aerogel by supercritical drying.… read more here.
Keywords: carbon aerogel; tio2; carbon; aerogel composites ... See more keywords
Effects of channel modification on microstructure and mechanical properties of C/SiC composites prepared by LA-CVI process
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.06.052
Abstract: Abstract Carbon fiber reinforced SiC matrix composites (C/SiC) with four different deposition channel sizes were fabricated via a novel laser-assisted chemical vapor infiltration (LA-CVI) method. Effects of infiltration channel sizes on microstructure and mechanical properties… read more here.
Keywords: cvi process; composites prepared; microstructure mechanical; properties sic ... See more keywords
Effects of TiC particle size on microstructures and mechanical properties of B4C–TiB2 composites prepared by reactive hot-press sintering of TiC–B mixtures
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.01.041
Abstract: Abstract Effects of the starting TiC particle size on the phase compositions, microstructures and mechanical properties of B4C–TiB2 composites prepared by reactive hot-press sintering of TiC–B mixtures were investigated. B4C–TiB2 composites were prepared from a… read more here.
Keywords: particle size; b4c tib2; composites prepared; tib2 composites ... See more keywords
Effects of pulse conditions on microstructure and mechanical properties of Si3N4/6061Al composites prepared by spark plasma sintering (SPS)
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.06.024
Abstract: Abstract In this paper, 30% Si3N4/6061Al composites were prepared by SPS process to study the influence of different pulses on the microstructure and mechanical properties of the composites. The results showed that there was a… read more here.
Keywords: composites prepared; microstructure mechanical; mechanical properties; pulse conditions ... See more keywords
Mechanical, electrical and thermal properties of ZrC-ZrB2-SiC ternary eutectic composites prepared by arc melting
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.04.028
Abstract: Abstract ZrC-ZrB2-SiC composites were prepared by arc-melting in Ar atmosphere using ZrC, ZrB2 and SiC as starting materials. The ternary eutectic composition of 20ZrC-30ZrB2-50SiC (mol%) was first identified. SiC about 7 μm in length and 500 nm… read more here.
Keywords: prepared arc; composites prepared; zrc zrb2; arc melting ... See more keywords
Corrosion behaviour and characterisation of Ni–Nb2O5 composites prepared by pulse electrodeposition
Sign Up to like & getrecommendations! Published in 2017 at "Surface Engineering and Applied Electrochemistry"
DOI: 10.3103/s1068375517020090
Abstract: The Ni–Nb2O5 composites were prepared by pulse electrodeposition method. Operating variables were optimized for getting a good deposit. The quantity of Nb2O5 particles in the coating was analyzed by an energy-dispersive X-ray diffraction spectrometer. X-ray… read more here.
Keywords: corrosion behaviour; composites prepared; prepared pulse; pulse electrodeposition ... See more keywords
Prepregs for Temperature Resistant Composites
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12234012
Abstract: In this paper, carbon fabric reinforced inorganic matrix composites were prepared. The inorganic matrix based on alkali activated aluminosilicate was used because of its resistance to fire and the temperatures up to 1000 °C. Influence… read more here.
Keywords: temperature; composites prepared; treated fabric; heat treated ... See more keywords
Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16052120
Abstract: C/C-SiC-(ZrxHf1−x)C composites were prepared by the reactive melt infiltration method. The microstructure of the porous C/C skeleton and the C/C-SiC-(ZrxHf1−x)C composites, as well as the structural evolution and ablation behavior of the C/C-SiC-(ZrxHf1−x)C composites, were… read more here.
Keywords: zrxhf1; zrxhf1 composites; ablation; sic zrxhf1 ... See more keywords
Interfacial Characterization and Thermal Conductivity of Diamond/Cu Composites Prepared by Liquid-Solid Separation Technique
Sign Up to like & getrecommendations! Published in 2023 at "Nanomaterials"
DOI: 10.3390/nano13050878
Abstract: Diamond/Cu composites are widely studied as a new generation of thermal management materials in the field of electronic packaging and heat sink materials. The surface modification of diamond can improve interfacial bonding between the diamond… read more here.
Keywords: liquid solid; solid separation; diamond composites; thermal conductivity ... See more keywords