Mechanical characteristics of individual bio particles
Sign Up to like & getrecommendations! Published in 2019 at "Biomass Conversion and Biorefinery"
DOI: 10.1007/s13399-019-00489-z
Abstract: The current work presents an experimental procedure to determine the mechanical characteristics of individual biomass particulate materials, including comparatively spherical olive pulp particles and hollow cylindrical hay particles. This study also provides a comparison between… read more here.
Keywords: mechanical characteristics; characteristics individual; olive pulp; compression tests ... See more keywords
An analysis of the influence of the precipitate type on the mechanical behavior of Al - Cu alloys by means of micropillar compression tests
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2020.05.040
Abstract: Abstract The influence of different types of precipitates (either Guinier-Preston zones, θ″ or θ′) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al -… read more here.
Keywords: micropillar compression; means micropillar; precipitate; compression tests ... See more keywords
Elastic modulus of claystone evaluated by nano-/micro-indentation tests and meso-compression tests
Sign Up to like & getrecommendations! Published in 2017 at "Journal of rock mechanics and geotechnical engineering"
DOI: 10.1016/j.jrmge.2016.02.002
Abstract: Abstract Toarcian claystone such as that of the Callovo-Oxfordian is a qualified multiphase material. The claystone samples tested in this study are composed of four main mineral phases: silicates (clay minerals, quartz, feldspars, micas) (≈86%),… read more here.
Keywords: micro indentation; indentation; meso compression; compression tests ... See more keywords
Pressure core based onshore laboratory analysis on mechanical properties of hydrate-bearing sediments recovered during India's National Gas Hydrate Program Expedition (NGHP) 02
Sign Up to like & getrecommendations! Published in 2019 at "Marine and Petroleum Geology"
DOI: 10.1016/j.marpetgeo.2018.09.005
Abstract: Abstract A solid understanding of the mechanical properties of hydrate-bearing sediments is essential for the safe and economic development of methane hydrate as an energy resource. In 2015, 104 pressure cores were collected, recovering sediments… read more here.
Keywords: mechanical properties; compression; hydrate bearing; bearing sediments ... See more keywords
Experimental study of the hardening process of Ti/Cu bimetal during compression test
Sign Up to like & getrecommendations! Published in 2021 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2021.102687
Abstract: Abstract The paper presents the results of tensile and compression tests of Ti/Cu bimetal and copper specimens cut out of 12 mm diameter rod. The bimetal was obtained in the extrusion process by permanently connecting a… read more here.
Keywords: process bimetal; compression; process; study ... See more keywords
Compression and crushing behavior of ceramic proppants and sand under high stresses
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Petroleum Science and Engineering"
DOI: 10.1016/j.petrol.2017.08.052
Abstract: Abstract Proppants play a pivotal role in hydraulic fracturing treatment for oil and gas production in low-permeability hydrocarbon-bearing formations. This paper experimentally investigates the compression and crushing behavior of engineered ceramic proppants and frac sand.… read more here.
Keywords: ceramic proppants; frac sand; compression; compression crushing ... See more keywords
Undrained triaxial compression tests on three-dimensional reinforced sand: effect of the geocell height
Sign Up to like & getrecommendations! Published in 2020 at "European Journal of Environmental and Civil Engineering"
DOI: 10.1080/19648189.2020.1728581
Abstract: AbstractThis paper presents an experimental thorough study on geocell reinforced loose sand (Dr = 25%), focusing on the improvement of the shear strength in undrained conditions. The experimental p... read more here.
Keywords: geocell; undrained triaxial; sand; tests three ... See more keywords
Multiscale Numerical Analysis of TRM-Reinforced Masonry under Diagonal Compression Tests
Sign Up to like & getrecommendations! Published in 2020 at "Buildings"
DOI: 10.3390/buildings10110196
Abstract: The present paper reports an experimental study coupled with a numerical modelling approach to simulate masonry walls strengthened with textile-reinforced mortar (TRM). This innovative reinforcing technique is based on high-strength fibre grids embedded into inorganic… read more here.
Keywords: diagonal compression; multiscale numerical; compression tests; masonry ... See more keywords
Production of Al Alloys with Kelvin Cells Using the Lost-PLA Technique and Their Mechanical Characterization via Compression Tests
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18020296
Abstract: The mechanical behavior of AA6082 Kelvin cell foams under compressive tests has been investigated in this work. The lost-PLA replication technique, a simple and cheap technique, has been adopted as the production method. Six Al… read more here.
Keywords: lost pla; compression; compression tests; production ... See more keywords
Production and Mechanical Characterization by Compression Tests of Al Alloys with Weaire–Phelan Cells Manufactured by the Lost-PLA Technique
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18061261
Abstract: In this study, the mechanical behavior of AA6082 foams with Weaire–Phelan (WP) cell structures under compressive loading was analyzed. The foams were produced using the lost-PLA replication method, a cost-effective and straightforward manufacturing technique. A… read more here.
Keywords: weaire phelan; lost pla; phelan; compression tests ... See more keywords