Compressive Behavior of 3D‐Printed Stiffened Bioinspired Tubular Metamaterials
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202402571
Abstract: This study proposes innovative bioinspired tubular metamaterial structures modeled after the zigzag patterns commonly found in natural systems. The straight, curved zigzag and their symmetrical counterparts serve as inspiration for the design of a novel… read more here.
Keywords: curved zigzag; compressive behavior; behavior printed; zigzag tubes ... See more keywords
Characterization of flexural and compressive behavior in polylactic acid composites for low‐cost transtibial prosthetic applications: Influence of reinforcements
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55319
Abstract: Loss of a lower limb leads to immobility, necessitating the use of prosthetic foot and socket as substitutes for lost limbs. However, the production of these prosthetic devices poses challenges due to the wide array… read more here.
Keywords: polylactic acid; behavior polylactic; compressive behavior; flexural compressive ... See more keywords
Compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing
Sign Up to like & getrecommendations! Published in 2019 at "Frontiers of Mechanical Engineering"
DOI: 10.1007/s11465-019-0549-7
Abstract: Lattice structures have numerous outstanding characteristics, such as light weight, high strength, excellent shock resistance, and highly efficient heat dissipation. In this work, by combining experimental and numerical methods, we investigate the compressive behavior and… read more here.
Keywords: compressive behavior; lattice structures; energy absorption; energy ... See more keywords
Compressive behavior of soft lattice structures and their application to functional compliance control
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101148
Abstract: Abstract Lattice structures are advantageous in terms of their high specific stiffness and strength, and have been applied to the design of lightweight structures owing to the recent development of additive manufacturing (AM). The unique… read more here.
Keywords: behavior soft; soft lattice; compliance; lattice structures ... See more keywords
Compressive behavior of selective laser melting printed Gyroid structures under dynamic loading
Sign Up to like & getrecommendations! Published in 2021 at "Additive manufacturing"
DOI: 10.1016/j.addma.2021.102054
Abstract: Abstract The compressive behavior of a typical triply periodic minimal surface (TPMS) structure (Gyroid structure) fabricated by selective laser melting (SLM) is investigated experimentally and numerically under different loading rates. By using the digital imaging… read more here.
Keywords: gyroid structures; compressive behavior; laser melting; deformation ... See more keywords
Numerical 3D modeling of the effects of strain rate and confining pressure on the compressive behavior of Kuru granite
Sign Up to like & getrecommendations! Published in 2017 at "Computers and Geotechnics"
DOI: 10.1016/j.compgeo.2017.03.004
Abstract: Abstract This paper deals with numerical modeling of the compressive behavior of granite rock under high strain rate dynamic loading and wide range of confining pressure. For this end, a constitutive model based on damage… read more here.
Keywords: confining pressure; strain rate; rate; numerical modeling ... See more keywords
Compressive behavior of non-slender hollow GFRP structural shapes in thermomechanical loading
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2016.10.085
Abstract: Abstract This paper presents an experimental study of the thermomechanical behavior of hollow square columns made of pultruded glass fiber reinforced polymer (GFRP). The specimens are subjected to monotonic and cyclic loadings until compression failure… read more here.
Keywords: temperature; behavior non; hollow; compressive behavior ... See more keywords
Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.120912
Abstract: Abstract Characteristics of ice constituent and soil particles primarily determine the mechanical properties of fill materials in extreme regions. The objective of this study is to investigate the unconfined compressive behavior of sand-silt mixed fill… read more here.
Keywords: frozen water; water; compressive behavior; fill materials ... See more keywords
Uniaxial compressive behavior of hook-end steel and macro-polypropylene hybrid fibers reinforced recycled aggregate concrete
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.124559
Abstract: Abstract The incorporation of hybrid fibers in recycled aggregate concrete (RAC) is an effective method to enhance the performance of RAC. This study aims to study the fresh properties and the uniaxial compressive behavior of… read more here.
Keywords: hybrid fibers; uniaxial compressive; aggregate concrete; compressive behavior ... See more keywords
Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.05.027
Abstract: Abstract In this paper, a calculation model to simulate the compressive behavior of R.C. columns with square cross-sections externally wrapped with FRP, including buckling effects of the longitudinal bars and reduction of the confinement pressure… read more here.
Keywords: frp; model; longitudinal bars; externally wrapped ... See more keywords
Analysis of the transverse compressive behavior of Kevlar fibers using microscopic scale approach
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2019.105149
Abstract: Abstract During the ballistic impact process of fabrics, yarns are locally subjected to both longitudinal tensile and transverse compressive loading. This paper presents a microscopic numerical investigation of the transverse compressive behavior of a single… read more here.
Keywords: behavior kevlar; transverse compressive; analysis transverse; compressive behavior ... See more keywords