Direct shear tests of glass fiber reinforced polymer connectors for use in precast concrete sandwich panels
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.09.017
Abstract: Abstract The precast concrete sandwich panel (PCSP) is a popular structural type used for prefabricated construction. In this study, three kinds of glass fiber reinforced polymer (GFRP) connector, including a flat plate, a corrugated plate,… read more here.
Keywords: connector; fiber reinforced; glass fiber; precast concrete ... See more keywords
Numerical and experimental tests of steel-concrete composite beam with the connector made of top-hat profile
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.12.035
Abstract: Abstract The paper presents solution for a steel-concrete composite beam structure. The connectors were executed from sections of a non-weldable top-hat profile 80 × 85 × 3 made of S235 steel. The connectors were fastened to the beam with… read more here.
Keywords: steel; connector; top hat; steel concrete ... See more keywords
Shear-slip behaviour and ductility of composite dowel connectors with pry-out failure
Sign Up to like & getrecommendations! Published in 2017 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2017.07.065
Abstract: Abstract The flexural strength of steel and concrete composite beams is influenced by both the connectors’ shear capacity and the slip across the steel–concrete interface. However, plastic design strategies commonly used in engineering practice assume… read more here.
Keywords: slip; shear slip; capacity; slip behaviour ... See more keywords
Experimental assessment of a novel steel tube connector in cross-laminated timber
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.09.058
Abstract: Abstract This paper summarises experimental investigations conducted on a novel connector assembly consisting of hollow steel tubes placed inside cross-laminated timber panels. The criteria that drove the connector development were: (i) easy to manufacture and… read more here.
Keywords: laminated timber; timber; cross laminated; steel ... See more keywords
Conventional vs. reinforced resin injected connectors’ behaviour in static, fatigue and creep experiments on slip-resistant steel-FRP joints
Sign Up to like & getrecommendations! Published in 2021 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2021.112089
Abstract: Abstract Due to constantly increasing traffic loads and ageing infrastructure, innovative materials for implementation in renovation and new bridge construction projects are gaining attention. One such innovation is hybrid structures consisting of Glass Fibre-Reinforced Polymer… read more here.
Keywords: steel; connector; resin injected; steel frp ... See more keywords
A non-linear finite element connector model with friction and plasticity for the simulation of bolted assemblies
Sign Up to like & getrecommendations! Published in 2021 at "Finite Elements in Analysis and Design"
DOI: 10.1016/j.finel.2021.103586
Abstract: Abstract Accurate simulation of bolted joints is not always consistent with industrial requirements, since numerous nonlinearities in the vicinity of the bolt can lead to overly expensive calculations. For this reason, commercial finite element (FE)… read more here.
Keywords: connector; simulation bolted; element; friction ... See more keywords
Analytical investigation of rectangular steel pipe shear connector
Sign Up to like & getrecommendations! Published in 2021 at "Structures"
DOI: 10.1016/j.istruc.2020.12.019
Abstract: Abstract Rectangular steel pipe (RSP) which is a new kind of connector in a composite slab of steel–concrete has been proposed. Research on the shear properties of RSPs is limited, but such data are needed… read more here.
Keywords: shear capacity; rectangular steel; steel; connector ... See more keywords
Experimental assessment of the composite joints shear connector component
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Constructional Steel Research"
DOI: 10.1016/j.jcsr.2017.01.022
Abstract: Abstract One of the methods adopted for the composite semi-rigid beam to column joints characterization is the component method present in the Eurocodes 3 and 4 that considers the composite action in the model by… read more here.
Keywords: shear connector; component; composite joints; semi rigid ... See more keywords
V-shaped shear connector for composite steel-concrete beam
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Constructional Steel Research"
DOI: 10.1016/j.jcsr.2018.07.016
Abstract: Abstract Shear connectors are fundamental components for composite steel-concrete beams. Their function is to bring about a good degree of interaction between the concrete slab and the steel profile. The stud bolt connector is currently… read more here.
Keywords: shear connector; connector; stud bolts; composite steel ... See more keywords
Deconstructable connector for TCC floors using self-tapping screws
Sign Up to like & getrecommendations! Published in 2021 at "Journal of building engineering"
DOI: 10.1016/j.jobe.2021.102495
Abstract: Abstract Timber-concrete composite (TCC) systems are effective solutions for the construction of new structural floors and the rehabilitation of the existing ones. Nevertheless, the subject of design for disassembly of TCC floors is still an… read more here.
Keywords: connector; self tapping; tcc floors; deconstructable connector ... See more keywords
Mechanical behavior investigation of press-fit connector based on finite element simulation and its reliability evaluation
Sign Up to like & getrecommendations! Published in 2021 at "Microelectronics Reliability"
DOI: 10.1016/j.microrel.2020.114010
Abstract: Abstract As the successor of soldering, the press-fit electrical connection is more and more widely used on account of a number of advantages, such as fast assembly. However, in practice, some contact failures were found.… read more here.
Keywords: mechanical behavior; press fit; connector; press ... See more keywords