Sign Up to like & get
recommendations!
1
Published in 2019 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2019.02.028
Abstract: Abstract Mo-Fe-B alloy powder blocks were designed and prepared to produce claddings with Mo2FeB2 phase on Q235 steel using an argon arc welding process. The effects of Mo content on microstructure, phase chemistry, microhardness and…
read more here.
Keywords:
resistance claddings;
phase;
wear resistance;
content microstructure ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.02.290
Abstract: Abstract This paper presents our detailed investigation into the effect of the WC–Co content on the microstructure and properties of supersonic plasma sprayed NiCrBSi composite coatings on Inconel 718. The results showed that the NiCrBSi/WC–Co…
read more here.
Keywords:
microstructure properties;
effect content;
microstructure;
supersonic plasma ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2020.101899
Abstract: Abstract The effect of Sc content on microstructure and properties of Al-Zn-Mg-Cu-Zr alloy was studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), optical microscopy (OM), tensile tests, hardness measurements and corrosion evaluation. It…
read more here.
Keywords:
properties alloy;
microscopy;
microstructure properties;
content microstructure ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2021 at "Progress in Natural Science: Materials International"
DOI: 10.1016/j.pnsc.2021.06.001
Abstract: Abstract The as-cast Mg–6Li–4Zn-xMn alloys were prepared and extruded at 280 °C with an extrusion ratio of 25:1. The effects of Mn content on the microstructure and mechanical properties of Mg–6Li–4Zn-xMn alloys were investigated in this…
read more here.
Keywords:
xmn alloys;
6li 4zn;
properties 6li;
mechanical properties ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65362-6
Abstract: Abstract The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg−8Li−3Al− (1,2,3)Sn (wt.%) alloys were investigated by X-ray diffractometry (XRD), optical microscopy (OM), scanning electron microscopy (SEM) and tensile test.…
read more here.
Keywords:
microscopy;
3al alloys;
8li 3al;
tensile properties ... See more keywords
Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
1
Published in 2019 at "RSC Advances"
DOI: 10.1039/c9ra04651h
Abstract: The properties and friction behavior of ZCuPb20Sn5 modified with P were investigated.
read more here.
Keywords:
properties zcupb20sn5;
content microstructure;
zcupb20sn5 alloy;
microstructure wear ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Nanoscale"
DOI: 10.1039/d1nr02667d
Abstract: The synthesis of ferroelectric HfxZr1-xO2 (0 ≤ x ≤ 0.50) thin films by chemical solution deposition (CSD) on the surface of Si (100) substrates using all-inorganic salt precursors, is demonstrated in this study. The effects…
read more here.
Keywords:
thin films;
xo2;
hfxzr1 xo2;
xo2 thin ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Coatings"
DOI: 10.3390/coatings9090534
Abstract: Cobalt-based alloy coatings and WC-Co-based ceramic–metal (cermet) coatings have been widely used because of their desirable mechanical properties and corrosion resistance. In this work, the influence of Co content on the microstructure, mechanical properties and…
read more here.
Keywords:
microstructure mechanical;
mechanical properties;
cobalt based;
resistance ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2022 at "Materials"
DOI: 10.3390/ma15228200
Abstract: Dilution rate is one of most important factors influencing the microstructure and performance of the laser cladding layer. In order to obtain a reasonable dilution rate in the laser cladding layer of Inconel 625 alloy,…
read more here.
Keywords:
625 alloy;
content microstructure;
inconel 625;
cladding layer ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16072694
Abstract: Al-Cu alloy has broad application prospects in the field of aerospace due to its excellent performance. In this paper, deposits with different Cu contents were prepared by the wire arc additive manufacturing (WAAM) process, and…
read more here.
Keywords:
wire arc;
arc additive;
content microstructure;
additive manufacturing ... See more keywords