Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
Sign Up to like & getrecommendations! Published in 2019 at "Additive Manufacturing"
DOI: 10.1016/j.addma.2019.01.005
Abstract: Abstract The additive manufacturing of structural composites is a disruptive technology currently limited by its moderate mechanical properties. Continuous fibre reinforcements have recently been developed to create high performance composites and open up encouraging prospects.… read more here.
Keywords: direction; reinforced polyamide; continuous carbon; carbon ... See more keywords
Fiber–matrix impregnation behavior during additive manufacturing of continuous carbon fiber reinforced polylactic acid composites
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101661
Abstract: Abstract Continuous carbon fiber reinforced thermoplastic (C-CFRTP) composites have been broadly applied in key industries due to their excellent material properties. Fused filament fabrication (FFF), as a material extrusion additive manufacturing (AM) technology, can be… read more here.
Keywords: continuous carbon; carbon fiber; fiber reinforced; impregnation ... See more keywords
Development of short- and continuous carbon fiber-reinforced ZrB2-SiC-ZrC matrix composites for thermal protection systems
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.05.268
Abstract: Abstract Short and plain-woven continuous carbon fiber-reinforced ZrB 2 -SiC-ZrC (C sf /ZSZ and C pw /ZSZ) matrix composites were fabricated by a Si melt-infiltration process for application to thermal protection systems (TPSs). The fracture… read more here.
Keywords: continuous carbon; carbon fiber; carbon; fiber reinforced ... See more keywords
Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2019.04.002
Abstract: Abstract Manufacturing difficulties, poor strength and foaming result from the high temperature that is used in thermoplastic polyimide (TPI) 3D printing and the high viscosity and water absorption by the TPI. To overcome these difficulties,… read more here.
Keywords: fiber reinforced; carbon fiber; tpi; continuous carbon ... See more keywords
Hygrothermal viscoelastic material characterisation of unidirectional continuous carbon-fibre reinforced polyamide 6
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.05.054
Abstract: This paper presents results of material characterisation experiments on the hygrothermal viscoelastic behaviour of unidirectional laminates of continuous carbon-fibre reinforced polyamide 6. The material behaviour when subjected to the automotive painting process is of interest.… read more here.
Keywords: continuous carbon; reinforced polyamide; hygrothermal viscoelastic; material characterisation ... See more keywords
Friction and wear behaviour of additively manufactured continuous carbon fibre reinforced PA6 composites
Sign Up to like & getrecommendations! Published in 2021 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2021.109332
Abstract: Abstract In the present work, continuous carbon fibre (CCF) reinforced polyamide 6 (PA6) composites were fabricated using the Fused Filament Fabrication (FFF) 3D printing technique. The sliding friction and wear behaviour of the printed CCF/PA6… read more here.
Keywords: continuous carbon; fibre; pa6 composites; wear behaviour ... See more keywords
Oxidation behaviour of a continuous carbon fibre reinforced ZrB2–SiC composite
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2017.04.012
Abstract: Abstract The oxidation behaviour in air of a hot-pressed ZrB 2 –SiC–Cf composite was investigated. Tests from 25 to 1550 °C in air were carried out at a rate of 10 °C/min and 45 °C/min. Then, 6 h isothermal… read more here.
Keywords: continuous carbon; behaviour continuous; sic composite; oxidation behaviour ... See more keywords
Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs?
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2019.12.004
Abstract: Abstract For the first time we show that spark plasma sintering can efficiently replace hot pressing for the densification of UHTCMCs, in the present case ZrB2/SiC composites reinforced with continuous carbon fibres. To this purpose,… read more here.
Keywords: fibre; plasma sintering; continuous carbon; spark plasma ... See more keywords
Assessing effective properties of continuous carbon fiber-reinforced composites with the preset cracks
Sign Up to like & getrecommendations! Published in 2020 at "Mechanics of Advanced Materials and Structures"
DOI: 10.1080/15376494.2020.1721622
Abstract: Abstract Initial microscopic damages, fiber fracture, and matrix cracking, usually occur in composites during their fabrication and secondary processing. Evaluating these initial damages influence on the mechanical properties of composites has a great importance for… read more here.
Keywords: continuous carbon; assessing effective; preset cracks; fiber ... See more keywords
Integration 3D printing of bionic continuous carbon fiber reinforced resin composite
Sign Up to like & getrecommendations! Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/ac252a
Abstract: Inspired by microstructure characteristics of mantis shrimp propodus with high mechanical strength, the bionic continuous carbon fiber (CF) reinforced acrylonitrile butadiene styrene (ABS) resin composite with layered spiral structure was prepared successfully via self-built integration… read more here.
Keywords: continuous carbon; resin; carbon fiber; carbon ... See more keywords
Direct-write 3D printing of UV-curable composites with continuous carbon fiber
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Composite Materials"
DOI: 10.1177/00219983221127182
Abstract: Continuous fiber-reinforced polymer composites, with their superior combinations of high stiffness, high strength, lightweight, and corrosion resistance, have been leading contenders in various applications ranging from aerospace to ground transportation. The integration with 3D printing… read more here.
Keywords: printing; carbon fiber; fiber; continuous carbon ... See more keywords