Articles with "copper graphite" as a keyword



The effect of copper granules on interfacial bonding and properties of the copper-graphite composite prepared by flake powder metallurgy

Sign Up to like & get
recommendations!
Published in 2019 at "Advanced Powder Technology"

DOI: 10.1016/j.apt.2019.09.013

Abstract: Abstract The study evaluates the effect of introducing Cu granules and control milling on the microstructure, interfacial bonding and mechanical properties including sintered density, hardness, compressive strength, flexural strength and electrical conductivity of Copper-Graphite (Gr)… read more here.

Keywords: interfacial bonding; metallurgy; powder; flake powder ... See more keywords
Photo from wikipedia

Copper-graphite composite: Shear modulus, electrical resistivity, and cross-property connections

Sign Up to like & get
recommendations!
Published in 2020 at "International Journal of Engineering Science"

DOI: 10.1016/j.ijengsci.2020.103232

Abstract: Abstract Shear modulus and electrical resistivity of copper graphite composites with different volume concentration of randomly oriented transversely-isotropic graphite flakes have been measured using torsion mechanical testing machine and four probe method, respectively. Shear modulus… read more here.

Keywords: shear modulus; graphite composite; copper graphite; electrical resistivity ... See more keywords
Photo from archive.org

Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

Sign Up to like & get
recommendations!
Published in 2018 at "Wear"

DOI: 10.1016/j.wear.2017.12.012

Abstract: Copper-graphite composites of different compositions sliding against copper are investigated with regards to friction, wear and contact resistance. We find that comprehensive studies including the ... read more here.

Keywords: phenomena tribofilm; copper; wear phenomena; copper graphite ... See more keywords
Photo from archive.org

Influence of Surface Structure of Sintered Compositions with Copper–Graphite Particles on Their Tribotechnical Properties

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Friction and Wear"

DOI: 10.3103/s1068366620020166

Abstract: Abstract —The tribotechnical properties of composite materials developed by powder metallurgy methods are studied. Friction tests was carried out in a dry environment on a vertical MMW-1 tribometer by the pin-on-disk mechanism. An Amscope optical… read more here.

Keywords: influence surface; copper graphite; surface structure; tribotechnical properties ... See more keywords

Radio-Frequency Conductivity Evaluation Method Based on Surface/Interface Scattering of Metallic Coatings

Sign Up to like & get
recommendations!
Published in 2024 at "Coatings"

DOI: 10.3390/coatings14050599

Abstract: Developing non-destructive evaluation methods for the radio frequency (RF) conductivity of conductive coatings can accelerate the performance evaluation and development of wireless communication devices. By using a split-resonator cavity to compare 800 nm copper/graphite and… read more here.

Keywords: radio frequency; conductivity; copper graphite; copper ... See more keywords

The Influence of Graphite Orientation on the Current-Carrying Friction Performance of Copper–Graphite Composite Materials

Sign Up to like & get
recommendations!
Published in 2025 at "Lubricants"

DOI: 10.3390/lubricants13060238

Abstract: In response to the need to optimize the performance of copper–graphite current-carrying friction materials, spark plasma sintering (SPS) technology was used to prepare copper–graphite composite materials with different graphite orientations. A self-made current-carrying friction testing… read more here.

Keywords: current carrying; carrying friction; copper graphite; copper ... See more keywords

Investigation of the Microstructure and Mechanical Properties of Copper-Graphite Composites Reinforced with Single-Crystal α-Al2O3 Fibres by Hot Isostatic Pressing

Sign Up to like & get
recommendations!
Published in 2018 at "Materials"

DOI: 10.3390/ma11060982

Abstract: Single-crystal α-Al2O3 fibres can be utilized as a novel reinforcement in high-temperature composites owing to their high elastic modulus, chemical and thermal stability. Unlike non-oxide fibres and polycrystalline alumina fibres, high-temperature oxidation and polycrystalline particles… read more here.

Keywords: crystal al2o3; single crystal; graphite composites; copper graphite ... See more keywords