Sign Up to like & get
recommendations!
1
Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900125
Abstract: AISI 301 stainless steel (SS) is known for its high strength and hardness but tends to be less corrosion resistant for many applications. Several attempts have been made in the past to investigate its corrosion…
read more here.
Keywords:
passivation layer;
stainless steel;
corrosion;
smat ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900763
Abstract: The effect of synergistic reinforcement of two types of carbon nanofillers, carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs), on the corrosion behavior of plasma‐sprayed alumina (Al2O3) nanocomposite coating in 3.5 wt% NaCl solution is studied. Incorporation…
read more here.
Keywords:
carbon nanotubes;
plasma sprayed;
corrosion behavior;
corrosion ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000765
Abstract: It is known that magnesium (Mg)–hydroxyapatite (HA) composites can be produced by the room temperature consolidation of particles. Herein, the corrosion behavior of an Mg–HA composite is analyzed, and a direct comparison with pure Mg…
read more here.
Keywords:
corrosion behavior;
hank solution;
magnesium hydroxyapatite;
corrosion ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100157
Abstract: The development of biodegradable Mg–Ca–Zn alloys strongly relies on the understanding of the varying 3D microstructural architectures by means of high‐density‐resolution imaging, such as synchrotron radiation–based X‐ray microtomography (SR‐μCT). The development of useful strategies to…
read more here.
Keywords:
chemistry;
effect chemistry;
microstructural architecture;
biodegradable alloys ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100237
Abstract: Multicomponent, high‐entropy alloys (HEAs) are promising candidates for replacing conventional alloys in high‐temperature applications. Herein, the high‐temperature corrosion of AlCrFeNiX0.5 (X = Co, Mo) is investigated. The samples are tested for their oxidation resistance at temperatures up…
read more here.
Keywords:
oxidation;
entropy alloys;
oxidation resistance;
high entropy ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202400839
Abstract: The effects of cryorolling (CR), hot rolling (HR), and different annealing temperatures on the microstructure, mechanical, and corrosion performance of AA4343/AA3003/AA4343 laminated sheets are studied. Compared with the HR samples, the microstructure of the CR…
read more here.
Keywords:
mechanical corrosion;
laminated sheets;
aa4343;
microstructure mechanical ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202401699
Abstract: Understanding pitting corrosion is critical, yet its kinetics and morphology remain challenging to study from X‐ray computed tomography (XCT) due to manual segmentation barriers. To address this, an automated pipeline leveraging deep learning for efficient…
read more here.
Keywords:
pitting corrosion;
segmentation;
ray computed;
pipeline ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202402135
Abstract: In order to improve the corrosion resistance of micro‐arc oxidation (MAO) ceramic layer of AZ31 magnesium alloy, a hydrophobic Mg–Al layered double hydroxide (LDH) coating was prepared on its surface by a one‐step hydrothermal method.…
read more here.
Keywords:
step hydrothermal;
hydrophobic;
one step;
coating ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202402196
Abstract: The specific amount of ball‐milling energy (SBME) plays a significant role in achieving a homogenous dispersion of graphene nanoplatelets (GNPs) in metal matrix composites (MMCs). The dispersion of GNPs in the metal matrices, induced by…
read more here.
Keywords:
ball;
ball milling;
mechanical corrosion;
corrosion properties ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202402722
Abstract: Superhydrophobic coatings with excellent water‐repellency are promising for corrosion resistance applications. Herein, a superhydrophobic–superoleophilic composite coating is prepared by combining fluorosilicone resin, microcapsules (MCs), and carbon nanofiber (CNF). Microsized MCs composed of the corrosion inhibitor…
read more here.
Keywords:
superoleophilic composite;
hydroxyquinoline;
superhydrophobic superoleophilic;
designing robust ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202402774
Abstract: The service life and safety of advanced nuclear reactors are heavily dependent on the stability of core materials. In lead‐cooled fast reactors (LFRs), lead‐bismuth eutectic (LBE) serves as the coolant due to its superior thermal…
read more here.
Keywords:
entropy alloys;
lead bismuth;
bismuth eutectic;
resistance ... See more keywords