Evaluation of corrosion characteristics and corrosion effects on the mechanical properties of reinforcing steel bars based on three-dimensional scanning
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.07.030
Abstract: Abstract Non-uniform corrosion of steel reinforcing bars is the main cause of structural failure in civil engineering. However, the accurate measurement of the critically corroded cross-sectional area, or the pit shape, is difficult owing to… read more here.
Keywords: three dimensional; corroded steel; steel bars; corrosion effects ... See more keywords
Evaluation of the corrosion effects on the performance of composite bridge based on cellular automata and finite element method
Sign Up to like & getrecommendations! Published in 2020 at "Structure and Infrastructure Engineering"
DOI: 10.1080/15732479.2020.1860095
Abstract: This paper investigates the assessment of corrosion effects on the performance of the composite bridge caused by chloride ions during the service life depending on Cellular Automata (CA) and Finite... read more here.
Keywords: effects performance; corrosion effects; cellular automata; composite bridge ... See more keywords
Chloride-Induced Corrosion Effects on the Structural Performance of Concrete with Rebar and Fibres: A Review
Sign Up to like & getrecommendations! Published in 2025 at "Applied Sciences"
DOI: 10.3390/app15126457
Abstract: Chloride-induced corrosion is a major contributor in the degradation of standardised steel-based products (e.g., rebars and fibres) commonly used for reinforcing concrete structures. Since cracked reinforced concrete elements are determined to be more susceptible to… read more here.
Keywords: rebar; induced corrosion; concrete; corrosion ... See more keywords
Tribological and Corrosion Effects from Electrodeposited Ni-hBN over SS304 Substrate
Sign Up to like & getrecommendations! Published in 2025 at "Lubricants"
DOI: 10.3390/lubricants13070318
Abstract: The aim of the present study is to investigate the influence of Nickel–Hexagonal Boron Nitride (Ni-hBN) nanocomposite coatings, deposited using the pulse reverse current electrodeposition technique. This experimental study focuses on assessing the tribological and… read more here.
Keywords: sample; ss304 substrate; effects electrodeposited; corrosion ... See more keywords
Incorporation of Corrosion Effects into the Life-Cycle Analysis of AW-2017A-T4 Aluminium Alloy under Bending Moment
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13173681
Abstract: The paper presents the results of fatigue tests of corroded AW-2017A-T4 aluminium alloy samples subjected to an alternating (symmetrical) bending load. Although there are a number of works describing pre-corrosion fatigue in aluminium alloys, relatively… read more here.
Keywords: corrosion effects; corrosion; 2017a aluminium; aluminium alloy ... See more keywords