Optimization of Tensile and Corrosion Properties of Dissimilar Friction Stir Welded AA2024-7075 Joints
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3785-9
Abstract: In this work, we performed some joining experiments of dissimilar aluminum alloys AA2024-T351 and AA7075-T651 using friction stir welding (FSW) technique with different process parameters (rotational speed, welding speed and plunge depth). Response surface methodology… read more here.
Keywords: tensile corrosion; corrosion; corrosion properties; friction stir ... See more keywords
Atomic Layer-Deposited Al2O3 Interlayer for Improved Tribological and Anti-corrosion Properties of TiN Hard Coating on 316L Stainless Steel
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04427-y
Abstract: A dense Al2O3 interlayer was inserted into TiN to enhance the tribological and anti-corrosion properties of TiN hard coating via a hybrid process of magnetron sputtering and atomic layer deposition (ALD). The influence of the… read more here.
Keywords: tribological anti; layer; corrosion properties; anti corrosion ... See more keywords
Effects of Annealing on Mechanical and Corrosion Properties of As-Extruded NQZ310K Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04643-x
Abstract: The as-extruded NQZ310K (Mg-3.0Nd-1.0Ag-0.2Zn-0.4Zr, mass fraction) alloy was annealed at 300, 350, 400, 450, and 500 °C, respectively. Microstructures of the alloy were observed by an optical microscope and a scanning electron microscope equipped with an… read more here.
Keywords: alloy; effects annealing; corrosion properties; extruded nqz310k ... See more keywords
Effect of Microstructural Constituents on Fusion Zone Corrosion Properties of GMA Welded AA 5083 with Novel Al–Mg Welding Wires of High Mg Contents
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00434-9
Abstract: The corrosion behavior of fusion zones (FZ-1: 5.39 Mg–0.66Mn, FZ-2: 5.49 Mg–0.35Mn, and FZ-3: 5.72 Mg–0.32Mn) of AA5083 alloy welded with high Mg-containing Al–Mg filler wires has been systematically investigated. An extensive microstructural characterization was… read more here.
Keywords: fusion zone; corrosion properties; corrosion; fusion ... See more keywords
Effect of Pulse Frequency on Microstructural and Corrosion Properties of Inconel 718 Gas Tungsten Arc Weldments
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01626-y
Abstract: A study has been carried out to understand the effect of pulse frequencies on the formation of laves phase, the microstructural and corrosion properties of Inconel 718. Bead on welds was made by using gas… read more here.
Keywords: properties inconel; frequency; corrosion properties; microstructural corrosion ... See more keywords
Thermodynamic Simulation of Niobium-Containing Austenitic Stainless Steels: Microstructure and Corrosion Properties
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01642-y
Abstract: AbstractIn the present work, as cast niobium (Nb) alloyed (0.66 wt%, 1 wt% and 1.75 wt% of Nb) austenitic stainless steels were solution annealed and sensitized at 550 °C, 650 °C and 750 °C for a period of… read more here.
Keywords: niobium; corrosion properties; austenitic stainless; corrosion ... See more keywords
Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ = 0, 2, 3, 5) alloys
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2017.08.014
Abstract: Abstract Effect of extrusion on the microstructures and corrosion properties of Mg-2Ca-χAl (χ = 0, 2, 3, 5 wt.%) alloys were investigated in present work. Results showed that the precipitated phase changed from Mg2Ca and (Mg, Al)2Ca to… read more here.
Keywords: 2ca alloys; effect extrusion; corrosion properties; properties 2ca ... See more keywords
Microstructure and corrosion properties of zinc-graphene oxide composite coatings
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.03.015
Abstract: Abstract Microstructure and corrosion properties of electrodeposited zinc-graphene oxide (Zn-GO) composite coatings and Zn-GO-Zn multilayer coating was investigated. Addition of GO enhanced the corrosion resistance of the composite coating. Microstructural characterization revealed that the enhancement… read more here.
Keywords: corrosion properties; graphene oxide; corrosion; microstructure corrosion ... See more keywords
Synthesis of novel plant oil-based isocyanate-free urethane coatings and study of their anti-corrosion properties
Sign Up to like & getrecommendations! Published in 2021 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2021.110502
Abstract: Abstract In this study, a bio-resource resin was synthesized via epoxidation and carbonation of linseed oil (LO) in acidic conditions, and then in the presence of tetra ‐ n ‐ butyl ammonium bromide (TBAB) and… read more here.
Keywords: corrosion properties; carbonation; spectroscopy; anti corrosion ... See more keywords
Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.11.212
Abstract: Abstract The corrosion properties of the nanostructured Al 84 Ni 7 Gd 6 Co 3 alloy produced by hot pressing of the metallic glassy powder, have been investigated. The results reveal that the nanostructure Al… read more here.
Keywords: alloy; alloy produced; corrosion properties; produced hot ... See more keywords
Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.08.120
Abstract: Abstract The TixNixCu50-xZr50-x (X = 25,30,35,40) alloys with 2 mm in diameter were prepared by copper mold casting method studied in terms of fracture behavior, mechanical properties and electrochemical corrosion properties, in which composite structure with featureless amorphous… read more here.
Keywords: metallic glass; matrix; corrosion properties; corrosion ... See more keywords