Articles with "corundum abrasives" as a keyword



Photo from wikipedia

Synthesis and two-step sintering behavior of solution derived corundum abrasives with plate-like grains

Sign Up to like & get
recommendations!
Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.04.059

Abstract: Abstract Corundum abrasives with plate-like grains were fabricated by a two-step sintering technique using the solution-based process with the addition of the ternary compound additive Na 3 AlF 6 -CaO-SiO 2 . The two-step sintering… read more here.

Keywords: corundum abrasives; abrasives plate; step sintering; two step ... See more keywords
Photo from wikipedia

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Sign Up to like & get
recommendations!
Published in 2020 at "Chinese Journal of Aeronautics"

DOI: 10.1016/j.cja.2020.07.004

Abstract: Abstract Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the… read more here.

Keywords: corundum abrasives; advances fabrication; corundum; ceramic corundum ... See more keywords
Photo by eprouzet from unsplash

Effect of TiO2–SiO2 on microstructure and mechanical characteristics of zirconium corundum abrasives by sol-gel method

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2019.06.162

Abstract: Abstract Zirconium-toughened-alumina (ZTA) corundum abrasives were successfully fabricated with TiO 2 –SiO 2 co-doping by using the sol-gel method. Single particle compressive strength of the obtained ZTA corundum abrasive was evaluated upon the addition of… read more here.

Keywords: sol gel; tio sio; corundum abrasives; gel method ... See more keywords
Photo by fozzie from unsplash

Effect of CaO-TiO2-SiO2 on the Microstructure and Mechanical Properties of Ceramic Corundum Abrasives

Sign Up to like & get
recommendations!
Published in 2023 at "Inorganics"

DOI: 10.3390/inorganics11050187

Abstract: Ceramic corundum abrasives were prepared using pseudo-boehmite as a raw material via the sol-gel method. Additives can significantly change the microscopic morphology of abrasives and improve mechanical properties. When 2 wt% CaO-TiO2-SiO2 with a molar… read more here.

Keywords: tio2 sio2; microstructure mechanical; cao tio2; ceramic corundum ... See more keywords