High-Temperature Erosive Behavior of Plasma Sprayed Cr3C2-NiCr/Cenosphere Coating
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3226-9
Abstract: This research examines the deposition of Cr3C2-NiCr/cenosphere and Cr3C2-NiCr coatings on MDN 321 steel through the process of plasma spray. In this process, the solid particle erosion test is established at 200, 400, 600 °C with… read more here.
Keywords: cr3c2 nicr; cenosphere coating; erosive behavior; temperature ... See more keywords
Mechanical and High-Temperature Tribological Properties of Cr3C2-NiCr/TiN Duplex Coating
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05226-6
Abstract: Preparation of duplex coating is an innovative way to improve components surface in terms of mechanical and tribological properties by the combination of high velocity oxy-fuel (HVOF) and physical vapor deposition (PVD) technologies. The present… read more here.
Keywords: cr3c2 nicr; tin; nicr tin; duplex coating ... See more keywords
High-Temperature Oxidation and Corrosion Behaviour of APS CoCrAlY + Cr3C2–NiCr Composite Coating
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-0322-9
Abstract: An approach of chrome carbide-based composite coating entailing of hard phase (Cr3C2–NiCr) and matrix-CoCrAlY was tailored to encounter the severe environments such as elevated temperature oxidation, corrosion and erosion in gas turbine application. CoCrAlY + Cr3C2–NiCr… read more here.
Keywords: cr3c2 nicr; oxidation; oxidation corrosion; composite coating ... See more keywords
Microstructure of HVOF-sprayed Ag–BaF2⋅CaF2–Cr3C2–NiCr coating and its tribological behavior in a wide temperature range (25 °C to 800 °C)
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.08.199
Abstract: Abstract Ag–BaF2⋅CaF2–Cr3C2–NiCr composite powders were prepared by physically blending commercial BaF2⋅CaF2–Cr3C2–NiCr and Ag powders. Ag–BaF2⋅CaF2–Cr3C2–NiCr composite coatings were deposited on Inconel 718 alloy substrate by high velocity oxy-fuel (HVOF) spraying. The friction and wear behavior… read more here.
Keywords: cr3c2 nicr; cr3c2; temperature; microscopy ... See more keywords
Creation of modified Cr3C2–NiCr hardmetal coating microstructures through novel processing
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153868
Abstract: Abstract High velocity thermal spray Cr3C2–NiCr coatings are widely used to mitigate wear at high temperatures and in corrosive environments due to their superior oxidation and corrosion resistance relative to WC-Co coatings. This work explored… read more here.
Keywords: cr3c2 nicr; heat treatment; creation modified; coating microstructures ... See more keywords
Effect of porosity on wear behaviour of remanufacturing Cr3C2-NiCr coatings under oil lubrication
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.02.184
Abstract: Abstract Remanufacturing is an advanced stage in the development of maintenance engineering and surface engineering, which is an important component of sustainable manufacturing. As a significant remanufacturing technology, thermal spraying is an important basis for… read more here.
Keywords: cr3c2 nicr; porosity; oil lubrication; wear behaviour ... See more keywords
TiC–NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2–NiCr
Sign Up to like & getrecommendations! Published in 2020 at "Wear"
DOI: 10.1016/j.wear.2020.203273
Abstract: Abstract TiC-based hardmetal coatings containing 25 or 40 vol% Ni-20 wt%Cr matrix (hereafter TiC–25NiCr and TiC–40NiCr) were obtained by High Velocity Oxygen-Fuel (HVOF) and High Velocity Air-Fuel (HVAF) spraying, starting from high-energy ball milled feedstock powders. These… read more here.
Keywords: cr3c2 nicr; cocr; tic nicr; tic 40nicr ... See more keywords
Corrosion behaviour of detonation gun sprayed cermet coatings on AA5083
Sign Up to like & getrecommendations! Published in 2020 at "Surface Engineering"
DOI: 10.1080/02670844.2020.1807096
Abstract: ABSTRACT Cermet coatings were fabricated on AA5083 by D gun coating technique using three different combinations of powder feedstock namely WC–Co, WC–Co–Cr, and Cr3C2–NiCr. The effect of powder combinations on coatings’ phase composition, surface morphology,… read more here.
Keywords: cr3c2 nicr; cermet coatings; corrosion behaviour; gun ... See more keywords
Tribological assessment of NiCr, Al2O3/TiO2, and Cr3C2/NiCr coatings applied on a cylinder liner of a heavy-duty diesel engine
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Engine Research"
DOI: 10.1177/1468087420930164
Abstract: Internal combustion engines consume about 90% of fuel refined from crude oil which supplies 30% of the annual global flow of energy. Heavy-duty diesel engines are the primary source of power used in highways, marine,… read more here.
Keywords: cr3c2 nicr; engine; heavy duty; al2o3 tio2 ... See more keywords