Sign Up to like & get
recommendations!
0
Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.02.098
Abstract: Abstract The crack development behavior in thermally sprayed anti-oxidation coating was investigated after long-term and short-term oxidation with repeated thermal cycles from 1500 °C to room temperature. According to the distribution characteristics, the formed cracks can…
read more here.
Keywords:
thermally sprayed;
development behavior;
type cracks;
crack ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "Road Materials and Pavement Design"
DOI: 10.1080/14680629.2017.1389076
Abstract: Illinois has many years of experience using various reclaimed materials in highway construction; and in recent years, recycled asphalt shingles (RAS) have been adopted for use in hot-mix asphalt (HMA), along with much higher amounts…
read more here.
Keywords:
asphalt;
performance;
mix;
hma overlay ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Russian Engineering Research"
DOI: 10.3103/s1068798x17030030
Abstract: The use of light aluminum–lithium alloys with high elastic moduli in hybrid laminated materials for the production of skin panels in airplane wings is considered.
read more here.
Keywords:
fatigue crack;
materials slow;
hybrid laminated;
laminated materials ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2023 at "Buildings"
DOI: 10.3390/buildings13041032
Abstract: The openings at the sidewalls of subway station entrances generally reduce the localized load-bearing capacity of the sidewalls and lead to concentrated stress around the openings. In this study, to strengthen the sidewalls with openings…
read more here.
Keywords:
frame;
entrance frame;
crack development;
subway station ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Materials"
DOI: 10.3390/ma12081210
Abstract: This study has investigated the changes that might appear in post-peak flexural response. Before the flexural test, prismatic specimens were placed in a furnace chamber and exposed to elevated temperatures of 400, 600, and 800…
read more here.
Keywords:
fibre;
toughness;
fibre reinforced;
crack development ... See more keywords