A Comparison of Curing Process-Induced Residual Stresses and Cure Shrinkage in Micro-Scale Composite Structures with Different Constitutive Laws
Sign Up to like & getrecommendations! Published in 2017 at "Applied Composite Materials"
DOI: 10.1007/s10443-017-9608-6
Abstract: In this paper, three kinds of constitutive laws, elastic, “cure hardening instantaneously linear elastic (CHILE)” and viscoelastic law, are used to predict curing process-induced residual stress for the thermoset polymer composites. A multi-physics coupling finite… read more here.
Keywords: cure shrinkage; constitutive laws; shrinkage; process induced ... See more keywords
Comparative study of carbide slag autoclaved aerated concrete (AAC) manufactured under thermal oven and microwave pre-curing process: Foaming course, rough body strength and physic-mechanical properties
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.117550
Abstract: Abstract The substitution of carbide slag to quicklime in carbide slag autoclaved aerated concrete (AAC) preparation caused significant side-effect on stable formation of porosity structure in pre-curing process. With objective of regulating slurry foaming course… read more here.
Keywords: pre curing; carbide slag; microwave pre; curing process ... See more keywords
Evaluation by NIRS technology of curing process of ham with low sodium content.
Sign Up to like & getrecommendations! Published in 2020 at "Meat science"
DOI: 10.1016/j.meatsci.2020.108075
Abstract: NIR spectroscopy combined with chemometric methods has been used to develop a prediction models of the most influential parameters in curing process of two types of hams (140 hams) using different salting techniques, lean hams… read more here.
Keywords: technology curing; evaluation nirs; sodium; process ... See more keywords
Optimizing curing process of graphene oxide/waterborne epoxy blends by curing kinetics simulation considering the coupling of heat conduction and curing reaction
Sign Up to like & getrecommendations! Published in 2019 at "Thermochimica Acta"
DOI: 10.1016/j.tca.2018.12.016
Abstract: Abstract Curing kinetics of the waterborne epoxy emulsion (EPWE)/Graphene oxide (GO) system was investigated by non-isothermal differential scanning calorimetry (DSC), which shows an autocatalytic behavior and can be well predicted by model fitting kinetic method.… read more here.
Keywords: curing kinetics; process; waterborne epoxy; graphene oxide ... See more keywords
Monitoring the curing process of epoxy adhesive using ultrasound and Lamb wave dispersion curves
Sign Up to like & getrecommendations! Published in 2021 at "Mechanical Systems and Signal Processing"
DOI: 10.1016/j.ymssp.2020.107397
Abstract: Abstract Monitoring the stiffness of adhesives is a crucial issue when considering the durability and strength of adhesive joints. While there are many studies conducted on specimens made only from adhesive, the problem of curing… read more here.
Keywords: monitoring curing; epoxy adhesive; adhesive using; curing process ... See more keywords
Design of Epoxy-Functionalized Styrene-Butadiene Rubber with Bio-Based Dicarboxylic Acid as a Cross-Linker toward the Green-Curing Process and Recyclability
Sign Up to like & getrecommendations! Published in 2020 at "Industrial & Engineering Chemistry Research"
DOI: 10.1021/acs.iecr.0c00481
Abstract: Covalently curing process for rubbers is indispensable in rubber industry; however, there have been several inherent issues caused by traditional curing methods, such as the utilization of toxic cu... read more here.
Keywords: functionalized styrene; design epoxy; process; curing process ... See more keywords
Dynamic behaviours of epoxy resin thin films during the curing process.
Sign Up to like & getrecommendations! Published in 2023 at "Soft matter"
DOI: 10.1039/d2sm01500e
Abstract: Epoxy resin thin films are widely used in applications such as coating materials, insulator films, and adhesives; accordingly, investigations of their physical properties have garnered increasing importance. Although the physical properties of thermoset epoxy thin… read more here.
Keywords: curing process; epoxy resin; thin films; resin thin ... See more keywords
Neural-fuzzy optimization of thick composites curing process
Sign Up to like & getrecommendations! Published in 2019 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2018.1512116
Abstract: ABSTRACT This article addresses the optimization of curing process for thick composite laminates. The proposed methodology aims at the evaluation of the thermal cycle promoting a desired evolution of the degree of cure inside the… read more here.
Keywords: fuzzy optimization; neural fuzzy; optimization thick; cure ... See more keywords
New Complex Epoxy Ester Resin-Based Binder: Synthesis and Influence on the Curing Process of Epoxyamine Compositions
Sign Up to like & getrecommendations! Published in 2020 at "Russian Journal of Applied Chemistry"
DOI: 10.1134/s1070427220020044
Abstract: Abstract Epoxidation of bis(2-hydroxyethyl) terephthalate obtained from waste polyethylene terephthalate was carried out using epichlorohydrin. Composition and structure of the synthesized oligomer are established by IR spectroscopy and chemical analysis of functional groups. Differential scanning… read more here.
Keywords: process epoxyamine; curing process; process; new complex ... See more keywords
Effect of Microwave and Ultrasound during the Killing Stage of the Curing Process of Vanilla (Vanilla planifolia, Andrews) Pods
Sign Up to like & getrecommendations! Published in 2023 at "Foods"
DOI: 10.3390/foods12030469
Abstract: The curing process (CP) of Vanilla planifolia pods, which is a long and tedious process, is necessary to obtain the natural vanilla extract. This research evaluated the application of microwave (M) and ultrasound (U) during… read more here.
Keywords: curing process; process vanilla; effect; stage ... See more keywords
Improved Oxidation Resistance of Graphite Block by Introducing Curing Process of Phenolic Resin
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16093543
Abstract: The purpose of this study is to improve the oxidation resistance of graphite blocks after graphitization at 2800 °C by introducing a curing process of phenolic resin, used as a binder to control the pore… read more here.
Keywords: curing process; graphite block; oxidation resistance; phenolic resin ... See more keywords