Effect of Tetraethylenepentamine on Silver Conductive Adhesive
Sign Up to like & getrecommendations! Published in 2018 at "JOM"
DOI: 10.1007/s11837-018-2939-4
Abstract: The use of electrically conductive adhesive (ECA) reduces the harm of traditional soldering technology, removes defects and improves reliability during the soldering process. ECAs are manufactured using different curing agents. The different curing agents have… read more here.
Keywords: temperature; curing temperature; conductive adhesive; tetraethylenepentamine ... See more keywords
Effects of Curing Temperature on Strength of Lime-Activated Slag Cement
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Civil Engineering"
DOI: 10.1007/s40999-017-0166-y
Abstract: This paper outlines the effects of curing conditions on the strength and hydration products of lime-activated slag cement. The slag cement was prepared by activating the ground granulated blast furnace slag with lime and plaster… read more here.
Keywords: strength; temperature; slag cement; curing temperature ... See more keywords
Influence of curing temperature on belite cement hydration: a comparative study with Portland cement
Sign Up to like & getrecommendations! Published in 2021 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2021.106499
Abstract: Abstract Belite cements (BCs) could be a more sustainable binder than Portland cements (PCs) but adequate knowledge of the hydration features has still to be built. In particular, the mild curing hydration temperature effects have… read more here.
Keywords: temperature belite; influence curing; curing temperature; cement ... See more keywords
Effect of curing temperature on volume stability of CAC-bonded alumina-based castables
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.03.103
Abstract: Abstract The distribution of in situ CA6 depends on the amount of the residual calcium aluminate cement (CAC) anhydrous phase and the distribution of CAC hydrates in CAC-bonded alumina-based castables and can influence the properties… read more here.
Keywords: cac bonded; based castables; cac; curing temperature ... See more keywords
The influence of slag properties, mix parameters and curing temperature on hydration and strength development of slag/cement blends
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.07.166
Abstract: Abstract Slag and other cement replacement materials provide an important route to low carbon footprint concrete construction. These materials are often by-products from other industries, and as such, their quality varies depending on source and… read more here.
Keywords: slag; strength; water; curing temperature ... See more keywords
Synergetic effects of curing temperature and hydration reactivity of MgO expansive agents on their hydration and expansion behaviours in cement pastes
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.02.150
Abstract: Abstract Effects of curing temperature on the hydration and expansion behaviours of MgO expansive agents with different reactivities in cement pastes were investigated via quantitative examination on the hydration degree of MgO, expansion, and microstructure… read more here.
Keywords: curing temperature; expansion; hydration; cement pastes ... See more keywords
Effect of curing temperature and relative humidity on the hydrates and porosity of calcium sulfoaluminate cement
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.04.044
Abstract: Abstract The main objective of this study was to investigate the effect of curing temperature and relatively humidity (RH) on the hydrates and porosity of calcium sulfoaluminate (CSA) cement pastes. A series of experiments including… read more here.
Keywords: curing temperature; effect curing; temperature; porosity ... See more keywords
Coupled effect of curing temperature and age on compressive behavior, microstructure and ultrasonic properties of cemented tailings backfill
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.117738
Abstract: Abstract With the increase of mining depth in mines, the underground high-temperature becomes more and more serious. The main objective of this study is to investigate the coupled effect of curing temperature and age on… read more here.
Keywords: temperature; temperature age; curing temperature; ctb specimens ... See more keywords
Influence of the curing temperature on the diffusion rate of the perfluorinated alkyl chains of a modified epoxy resin
Sign Up to like & getrecommendations! Published in 2017 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2017.03.053
Abstract: Abstract Perfluorononanoic acid (F17) was grafted to an epoxy resin. The virgin epoxy resin and the fluorinated epoxy resin were cured at various temperatures. Both air-resin and substrate-resin interfaces of the cured materials were characterized… read more here.
Keywords: resin; diffusion; epoxy resin; surface ... See more keywords
Simultaneous improvement of mechanical properties and curing temperature of cyanate ester resin by in situ generated modifier polymer having phenolic OH group
Sign Up to like & getrecommendations! Published in 2020 at "Polymer"
DOI: 10.1016/j.polymer.2020.122611
Abstract: Abstract Reduction in curing temperature of cyanate ester resin and improvement in mechanical properties of the corresponding cured resin were simultaneously achieved by in situ generation of N-(4-hydroxyphenyl)maleimide-styrene copolymer (HPMS) during the resin curing process.… read more here.
Keywords: resin; cured resin; ester resin; curing temperature ... See more keywords
Ultrasonic evaluation of strength properties of cemented paste backfill: Effects of mineral admixture and curing temperature.
Sign Up to like & getrecommendations! Published in 2019 at "Ultrasonics"
DOI: 10.1016/j.ultras.2019.105983
Abstract: This paper presents the findings of a research study designed and conducted to investigate the effects of mineral admixture and curing temperature on uniaxial compressive strength (UCS) and ultrasonic pulse velocity (UPV) behavior of laboratory-prepared… read more here.
Keywords: strength; temperature; admixture; curing temperature ... See more keywords