Triaxial behavior of cement-stabilized organic matter–disseminated sand
Sign Up to like & getrecommendations! Published in 2020 at "Acta Geotechnica"
DOI: 10.1007/s11440-020-00992-y
Abstract: Organic matter–disseminated sand (OMDS) is a widely distributed problematic soil in coastal areas of Hainan province, China. Its existence makes the installation of piles difficult and has the risk of insufficient bearing capacity. OMDS is… read more here.
Keywords: sand; stabilized omds; cement stabilized; curing time ... See more keywords
Mechanical and Microscopic Properties of Cement Stabilized Silt
Sign Up to like & getrecommendations! Published in 2020 at "Ksce Journal of Civil Engineering"
DOI: 10.1007/s12205-020-1671-0
Abstract: In order to explore the strength, water stability, compressibility, shear properties of cement stabilized silt, the one-dimensional consolidation tests, direct shear and unconfined compression tests were conducted on cement solidified silt. In addition, the microscopic… read more here.
Keywords: curing time; stabilized silt; cement stabilized;
The Impact of Different Application Techniques on Fiberglass Casts: A Mechanical Experimental Study.
Sign Up to like & getrecommendations! Published in 2020 at "Indian journal of orthopaedics"
DOI: 10.1007/s43465-020-00180-w
Abstract: Background Cast immobilization is a part of treatment in most of the orthopaedic injuries. The fiberglass material has several advantages over plaster of Paris which makes it more preferable. Some techniques are frequently used in… read more here.
Keywords: curing time; group; study; application ... See more keywords
Effect of curing time on granulated blast-furnace slag cement mortars carbonation
Sign Up to like & getrecommendations! Published in 2018 at "Cement and Concrete Composites"
DOI: 10.1016/j.cemconcomp.2018.04.006
Abstract: Abstract Currently, ground granulated blast-furnace slag cements use in cement-based materials is being increasing because perform well in marine and other aggressive environments. However, mortars and concretes made of this type of cement exhibit high… read more here.
Keywords: furnace slag; curing time; granulated blast; cement ... See more keywords
Effect of curing time on phase morphology and fracture toughness of PEK-C film interleaved carbon fibre/epoxy composite laminates
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112550
Abstract: Abstract The phase morphology developed by thermosetting and thermoplastic resin is one of the main concerns in interleaved thermosetting composites by thermoplastic resin, which directly affects the toughening efficiency. The carbon fibre reinforced epoxy matrix… read more here.
Keywords: time; phase morphology; pek; toughness ... See more keywords
Modelling the influence of density, curing time, amounts of lime and sodium chloride on the durability of compacted geopolymers monolithic walls
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.01.023
Abstract: Abstract This research investigates the durability (throughout wetting and drying cycles) of compacted fly ash-carbide lime blends to be used as monolithic walls submitted to heavy rainfall, high humidity and hot temperatures (as commonly found… read more here.
Keywords: curing time; durability; monolithic walls; influence ... See more keywords
Evaluation of effect of curing time on mixture performance of Advera warm mix asphalt
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.03.240
Abstract: Abstract Foaming warm mix asphalt (WMA) is a green asphalt technology that has been widely used in recent years. This study evaluates the effect of curing time on the material properties of Advera foaming, as… read more here.
Keywords: curing time; mix asphalt; mix; advera ... See more keywords
Investigation of the curing time on the mechanical behavior of normal concrete under triaxial compression
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.04.180
Abstract: Abstract Due to its hydration process and applications under complex loadings, concrete is a live material and might be subjected to triaxial loadings in short time after pouring. The aim of this study is to… read more here.
Keywords: normal concrete; mechanical behavior; curing time; time ... See more keywords
Self-solidification/stabilisation of electrolytic manganese residue: Mechanistic insights
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.118971
Abstract: Abstract Electrolytic manganese residue (EMR) is a type of industrial solid waste with high content of sulphur and heavy metals (HMs). In this study, a novel cementitious material composite is synthesised from ground granulated blast… read more here.
Keywords: manganese residue; curing time; stabilisation; hms ... See more keywords
Could light-curing time, post-space region and cyclic fatigue affect the nanomechanical behavior of a dual-curing cement for fiber post luting?
Sign Up to like & getrecommendations! Published in 2021 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2021.104886
Abstract: OBJECTIVE To evaluate the effects of curing time, post-space region and cyclic fatigue on the micromechanical properties of a fiber-post luting cement. The null hypotheses were that (1) curing time, (2) fatigue and (3) post-space… read more here.
Keywords: curing time; light curing; post space; post ... See more keywords
Curing Time Impacts on the Mechanical and Petrophysical Properties of a Laponite-Based Oil Well Cement
Sign Up to like & getrecommendations! Published in 2022 at "ACS Omega"
DOI: 10.1021/acsomega.2c03491
Abstract: Throughout the life of a well, the cement sheath is exposed to several loadings, which can harm its key properties and impede its functions. These loadings become more significant at the early age of forming… read more here.
Keywords: time impacts; well cement; cement; curing time ... See more keywords