Dry, MQL, and Nanofluid MQL Machining of Ti–6Al–4V Using Uncoated WC–Co Insert: Application of Jatropha Oil as Base Cutting Fluid and Graphene Nanoplatelets as Additives
Sign Up to like & getrecommendations! Published in 2020 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-020-04849-0
Abstract: Nanocutting fluids are very popular due to their excellent thermo-physical and tribological properties which provide adequate cooling and lubrication during metal cutting. Conventional dry machining of difficult-to-cut superalloy Ti–6Al–4V faces several challenges. To overcome this,… read more here.
Keywords: cutting fluid; base cutting; tool; mql ... See more keywords
Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2017.06.104
Abstract: Abstract A hybrid nanofluid (NF) with better thermal and tribological properties has been developed in this investigation by mixing alumina-based nanofluid with graphene nanoplatelets (GnP) in the volumetric concentrations of 0.25, 0.75 and 1.25 vol %.… read more here.
Keywords: hybrid nanofluid; cutting fluid; evaluation alumina; performance evaluation ... See more keywords
Development of a method based on MADM theory for selecting a suitable cutting fluid for granite sawing process
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2018.03.053
Abstract: Abstract The stone processing sector has begun to implement the Cleaner Production (CP) strategy to tackle with these burdens caused by the production process. Decision-makers need to select the most suitable cutting fluid for achieving… read more here.
Keywords: decision; fluid granite; cutting fluid; suitable cutting ... See more keywords
Recovery of silicon carbide and synthesis of silica materials from silicon ingot cutting fluid waste
Sign Up to like & getrecommendations! Published in 2021 at "Separation and Purification Technology"
DOI: 10.1016/j.seppur.2020.117556
Abstract: Abstract During wire sawing of silicon ingot into wafers, 40% of silicon is lost and being combined to cutting fluid to form the kerf slurry waste. Recycling this slurry containing silica materials represents an economical… read more here.
Keywords: microscopy; silicon ingot; waste; silica ... See more keywords
Use of palm olein as cutting fluid during turning of mild steel
Sign Up to like & getrecommendations! Published in 2020 at "Australian journal of mechanical engineering"
DOI: 10.1080/14484846.2020.1842156
Abstract: This research evaluated surface roughness and cutting forces using an alternative vegetable oil, namely, ‘super palm olein’, as cutting fluid on turning of mild steel. The outcomes of the proposed ... read more here.
Keywords: mild steel; turning mild; cutting fluid; olein cutting ... See more keywords
Contribution to the selection of cutting fluid type and its application technique for grinding of bearing steel
Sign Up to like & getrecommendations! Published in 2021 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/09544054211040633
Abstract: The elevated heat generation in grinding can develop high temperatures at the contact zone, which can adversely affect the surface integrity of the workpiece, especially when grinding hardened steels with conventional abrasives. Thus, the correct… read more here.
Keywords: technique; application technique; fluid; surface ... See more keywords
Investigation of Milling Stability under Cutting Fluid Supply by Microphone Signal Analysis
Sign Up to like & getrecommendations! Published in 2018 at "Sensors and Materials"
DOI: 10.18494/sam.2018.1978
Abstract: 1Computer and Intelligent Robot Program for Bachelor Degree, National Pingtung University, No. 4-18, Minsheng Rd., Pingtung City, Pingtung County 90003, Taiwan 2Department of Mechanical Engineering, National Chin-Yi University of Technology, No. 57, Sec. 2, Zhongshan… read more here.
Keywords: supply microphone; stability cutting; investigation milling; cutting fluid ... See more keywords
Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys
Sign Up to like & getrecommendations! Published in 2017 at "Applied Sciences"
DOI: 10.3390/app7060560
Abstract: Following a comprehensive review on titanium machining and methods of cutting fluid application, this paper presents a new Controlled cutting fluid impinging supply system (Cut‐list) developed to deliver an accurate amount of cutting fluid into… read more here.
Keywords: fluid; controlled cutting; supply system; cutting fluid ... See more keywords
Effect of Cutting Fluid on Milled Surface Quality and Tool Life of Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16062198
Abstract: The machining process of aluminum alloy usually produces built-up edge and tool sticking problems due to their low hardness and large plastic deformation, which may further affect the machined surface quality and tool life. This… read more here.
Keywords: tool; tool life; cutting fluid; surface quality ... See more keywords