Effect of microstructure and cutting speed on machining behavior of Ti6Al4V alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-017-0413-9
Abstract: Machining of aerospace and biomedical grade titanium alloys has always been a challenge because of their low conductivity and elastic modulus. Different machining methods and parameters have been adopted for high precision machining of titanium… read more here.
Keywords: titanium alloys; cutting speed; microstructure cutting; effect microstructure ... See more keywords
Influence of cutting speed and cooling method on the machinability of commercially pure titanium (CP-Ti) grade II
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2017.12.021
Abstract: Abstract The present investigation aims in highlighting the influence of cutting speed and an eco-friendly cooling technique during finish turning of CP-Ti grade 2. Experiments were performed at three distinct machining modes viz. dry cutting… read more here.
Keywords: cutting speed; machinability; influence cutting; grade ... See more keywords
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Sign Up to like & getrecommendations! Published in 2019 at "Measurement"
DOI: 10.1016/j.measurement.2019.04.022
Abstract: Abstract On-line monitoring of tool wear and tool breakage are very important to reduce production costs through the optimization of machining parameters. Increasing cutting forces affect workpiece quality and tool condition that is the ultimate… read more here.
Keywords: machining parameters; tool breakage; cutting speed; progressive tool ... See more keywords
Machinability Investigation of AISI 304 Austenitic Stainless Steels using Multilayer AlTiN/TiAlN Coated Carbide Inserts
Sign Up to like & getrecommendations! Published in 2018 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2018.02.082
Abstract: Abstract In the present study, multilayer AlTiN/TiAlN coating is used for coating of cemented carbide inserts and those are used for machining of AISI304 austenitic steel with high speed. The cemented carbide inserts used, are… read more here.
Keywords: speed; cutting speed; carbide inserts; altin tialn ... See more keywords
Multi-criteria optimization and predictive modeling of turning forces in high-speed machining of yttria based zirconia toughened alumina insert using desirability function approach
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405415596189
Abstract: An attempt has been made to apply the Taguchi parameter design method and multi-response optimization using desirability analysis for optimizing the cutting conditions (cutting speed, feed rate and depth of cut) on machining forces while… read more here.
Keywords: zirconia toughened; cutting speed; feed rate; speed ... See more keywords
Multiple Sensor Monitoring of CFRP Drilling to Define Cutting Parameters Sensitivity on Surface Roughness, Cylindricity and Diameter
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13122796
Abstract: Machining parameters affects the final quality of components made in carbon fiber reinforced plastic (CFRP) composite materials. In this framework, the work here presented aims at studying the right combination of cutting speed (vc) and… read more here.
Keywords: cylindricity; cylindricity diameter; cutting speed; roughness cylindricity ... See more keywords
Revealing the WEDM Process Parameters for the Machining of Pure and Heat-Treated Titanium (Ti-6Al-4V) Alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14092292
Abstract: Ti-6Al-4V is an alloy that has a high strength-to-weight ratio. It is known as an alpha-beta titanium alloy with excellent corrosion resistance. This alloy has a wide range of applications, e.g., in the aerospace and… read more here.
Keywords: titanium alloy; alloy; cutting speed; 6al alloy ... See more keywords
Development of a Caramel-Based Viscoelastic Reference Material for Cutting Tests at Different Rates
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14143798
Abstract: Cutting speed plays a crucial role for the behavior during and the final quality of viscoelastic foods after cutting and is, in industrial applications, usually adjusted on an empirical basis. Although previous studies investigated the… read more here.
Keywords: reference material; viscoelastic reference; cutting speed; caramel based ... See more keywords